Quote:
Originally Posted by SocalSam
How did you drop the blower air box?
|
There are only 4 fasteners that hold it in, so that's easy enough, but the hard part is pushing the left side slightly up to clear a small claw, while being mindful of the heater hoses that the backside hooks around, and then not mashing all the harnesses on the right side while bringing it down, which is at least the easiest part.
-
"Release the 7 clamps and disconnect the connectors."
-
"Remove the bolt and 2 screws and nut.
---
-Release the claw fitting and remove the blower
assembly."
Linear Mode
