11-13-2019, 01:14 PM
|
#40576
|
|
Member
|
|
Join Date: Oct 2016
Location: Philadelphia
Posts: 329
Real Name: Ryan
|
|
Member
Join Date: Oct 2016
Location: Philadelphia
Posts: 329
Real Name: Ryan
|
Goat armor - 20% off!
I just wrote an article/review on Trail4Runner talking about Goat Truck Armor and figured I'd share here as well. They're doing a limited 20% off deal for the first 25 people who order a 4Runner kit. Check out the article and for those too impatient and just want the discount code, it's T4RGOAT20.
Goat Off-Road Magnetic Armor: Review & Install For the 5th Gen 4Runner
__________________
2011 Trail Edition. Black. '17 RRW RRH-6's. w/285 KO2's. Rago molle panels. C4 Fabrication lo pro with 25" Xtreme LED, Smittybilt X20 winch and Agency 6 fairlead/shackle. RRW V3 rock sliders. TRD front skid. Spidertrax spacers. Gobi Stealth rack and ladder. ARB Safari snorkel. AnzoUSA 14+ tails. Blacked out projector/retro-fit head lights. Baja Designs pro fogs, S2 ditches and rear dust lights. Eibach 2.5" lift w/ ICON delta joint UCA's. C4 dual-swing rear bumper.
Check out Trail4Runner.com for more Installs and Write-Ups. Find my author link here.
|
|
Reply With Quote
|
11-13-2019, 04:23 PM
|
#40577
|
|
Member
|
|
Join Date: Mar 2019
Location: Tehachapi
Posts: 77
|
|
Member
Join Date: Mar 2019
Location: Tehachapi
Posts: 77
|
I took out my secondary battery and tray to find the source of a rattle after a trip to Death Valley and found this. Has anyone run into this issue? Anyone seen a thread on repairing and reinforcing factory Nutserts?
__________________
2019 TRD ORP with stuff bolted to it and my Alaskan Malamute benevolent overlord, Farley. KN6HZJ
|
|
Reply With Quote
|
11-13-2019, 04:28 PM
|
#40578
|
Junior Member
|
|
Join Date: Aug 2019
Location: Los Gatos
Posts: 24
|
|
Junior Member
Join Date: Aug 2019
Location: Los Gatos
Posts: 24
|
Nice one gibburnz - I'd been on and off looking for an excuse for the Goat Armor - now I have one. Order placed! Well worth it to save the sides through narrow trails!
|
|
Reply With Quote
|
11-13-2019, 04:51 PM
|
#40579
|
Member
|
|
Join Date: Sep 2019
Location: Twin Cities Minnesota
Posts: 67
|
|
Member
Join Date: Sep 2019
Location: Twin Cities Minnesota
Posts: 67
|
That goat armor would be great to protect my truck from my 2 year old. Nice! Smart idea.
__________________
2019 Mag Grey ORP - Falken Wildpeak A/T3W 275/70/17 - Spidertrax Spacers - TRD Intake - TRD Exhaust - Green Lane Offroad skid plate and sliders - Rago Fab MSP - DD SS3 Pro Fog - XD LED DRL/HBs - HR SV4 LED LBs - Sprint Booster - 35% Tint - 3M Paint Protection - LineX - Canvas Back - Weathertech - 2 Graco Child Seats
|
|
Reply With Quote
|
11-13-2019, 06:43 PM
|
#40580
|
Member
|
|
Join Date: Jul 2019
Location: Calgary
Posts: 257
|
|
Member
Join Date: Jul 2019
Location: Calgary
Posts: 257
|
Officially signed the purchase Agreement for my 2020 Pro! Arrived on tuesday and delivery is scheduled for friday.
Kinda counts as a mod, but dropped off a stock roof rack to replace the pro basket.. as it wouldnt fit in my parkade with it.
|
|
Reply With Quote
|
11-13-2019, 08:21 PM
|
#40581
|
|
Member
|
|
Join Date: Aug 2019
Location: Nowhere, Nevada
Posts: 636
Real Name: Dave
|
|
Member
Join Date: Aug 2019
Location: Nowhere, Nevada
Posts: 636
Real Name: Dave
|
Quote:
Originally Posted by ruff4runner
I took out my secondary battery and tray to find the source of a rattle after a trip to Death Valley and found this. Has anyone run into this issue? Anyone seen a thread on repairing and reinforcing factory Nutserts?
|
Ouch! Death Valley and vicinity can inflict serious pain on any vehicle. I have no answer to your situation though.
__________________
Dave
~When You Live in Nevada, "just down the road" is anywhere in the line of sight within the curvature of the earth.
2018 4Runner SR5
2012 Subaru Outback Premium
|
|
Reply With Quote
|
11-13-2019, 08:54 PM
|
#40582
|
Member
|
|
Join Date: Jun 2018
Location: KC Metro Area
Posts: 139
|
|
Member
Join Date: Jun 2018
Location: KC Metro Area
Posts: 139
|
Quote:
Originally Posted by ruff4runner
I took out my secondary battery and tray to find the source of a rattle after a trip to Death Valley and found this. Has anyone run into this issue? Anyone seen a thread on repairing and reinforcing factory Nutserts?
|
Looks like the nutsert held terrifically! The easiest repair is to replace the vehicle surrounding the nutsert.
Next repair would be weld the nut back in with a backing patch to strengthen the area. I believe there have been several others, especially those who upgraded to a size 31 battery that have had the tray and/or fender crack. I fully expect mine will do the same eventually. Toyota has definitely stretched the thinnest metal vs the heaviest load to the max in that application.
__________________
2019 TRD ORP, Milestar Patagonia LT295/70R17, Method Trail 701 wheels, King suspension 600 sprgs, Dobinson C59-677V +400 rr sprgs, ECGS 4.56 grs, Frt E-Locker, Coastal Offroad Alu dual swing rear bmpr, CBI Alu frt bumper, SmittyBilt X20 10K Synth, Flatlink E, RCI full steel skids and sliders, DuroBumps, MetalTech RR LCA, Dual 31M/34M Northstar Batts, Blue Sea ML-ACR, LFD Offroad Bat tray, Schrockworks air pump relo brkt, ARB twin comp, Gibson exh, Infinity Component dsh and dr spkrs, Hertz HCX 165 hatch spkrs, 2x Kicker KEY 180.4 DSP amps, Kenwood TM-V71, Cobra 75 WX ST, Midland MXT275, ArcLight LEDs, XenonDepot HID low, LED High, Diode Dynamics Turn-as-Tail, Switchbacks, CaliRaised Ditch light brackets, Rigid SS Ditch lights, Stock OR wheels with 285/70R17 E GY DuraTracs, Custom drawer/sleep platform, Dometic CFX50, More lights and antennas than I can name, beer
|
|
Reply With Quote
|
11-13-2019, 09:05 PM
|
#40583
|
|
Member
|
|
Join Date: Mar 2019
Location: Tehachapi
Posts: 77
|
|
Member
Join Date: Mar 2019
Location: Tehachapi
Posts: 77
|
Quote:
Originally Posted by Narat_524
Looks like the nutsert held terrifically! The easiest repair is to replace the vehicle surrounding the nutsert.
Next repair would be weld the nut back in with a backing patch to strengthen the area. I believe there have been several others, especially those who upgraded to a size 31 battery that have had the tray and/or fender crack. I fully expect mine will do the same eventually. Toyota has definitely stretched the thinnest metal vs the heaviest load to the max in that application.
|
Well, the 4runner has 11k on it so I was hoping it would go a bit further.
Your spot on about the group 31, it was a bridge too far, 77lbs held in place by sheetmetal.
__________________
2019 TRD ORP with stuff bolted to it and my Alaskan Malamute benevolent overlord, Farley. KN6HZJ
Last edited by ruff4runner; 11-13-2019 at 09:05 PM.
Reason: mispelled
|
|
Reply With Quote
|
11-13-2019, 09:25 PM
|
#40584
|
Member
|
|
Join Date: Aug 2019
Location: Tucson, AZ
Posts: 46
|
|
Member
Join Date: Aug 2019
Location: Tucson, AZ
Posts: 46
|
Installed shrockworks angled sliders. A little bit of a pain in the ass but worth it!
|
|
Reply With Quote
|
11-13-2019, 11:18 PM
|
#40585
|
|
Senior Member
|
|
Join Date: Jan 2017
Location: North Carolina
Age: 41
Posts: 2,999
Real Name: Chris
|
|
Senior Member
Join Date: Jan 2017
Location: North Carolina
Age: 41
Posts: 2,999
Real Name: Chris
|
I had Sylvania Silverstar Ultra H11 bulbs in my 2016 which were better than stock but in these projectors they were not impressive. I love these bulbs and have had great results with them in other vehicles but not the 4Runner. I decided to do the H9 headlight bulb swap for my low beams. Driving home from work I can tell a drastic difference. Cleaner more pure white light that lights up the road further and wider but at the same cutoff. So far it appears I am not blinding oncoming traffic which is a good thing. I took the highway home tonight but I will put them to the test on all back roads tomorrow on my way to work. So far, I am very pleased with this 5 minute $14.00 mod. These are the bulbs I used.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
2016 4RUNNER SR5 PURCHASED NEW JANUARY 29TH 2017 - OEM FJ TRD PRO SUSPENSION WITH 3/8 CORNFED TOP HAT SPACERS & 1" PRELOAD SPACER FOR A TOTAL OF 2.5" FRONT LIFT, 2" CORNFED SPACERS IN THE BACK (I'M A DEALER FOR CORNFED SUSPENSION), FX PRO WHEELS, 295/70/17 MICKEY THOMPSON ATZ P3, WEATHER PACKAGE, NAVIGATION, LED INTERIOR LIGHTS, AFE PRO DRY AIR FILTER, BORLA MUFFLER, TYGER SLIDER STEPS, BLACKOUT EMBLEM KIT, TRD PRO GRILL, POLY FRONT AND REAR SWAY BAR BUSHINGS, OEM 3RD GEN REAR SWAY BAR LINKS, REAR DIFF BREATHER MOD, OEM ALUMINUM OIL FILTER HOUSING UPGRADE, OIL CATCH CAN.
|
|
Reply With Quote
|
11-14-2019, 12:05 AM
|
#40586
|
|
Senior Member
|
|
Join Date: Sep 2015
Location: NJ
Posts: 1,221
|
|
Senior Member
Join Date: Sep 2015
Location: NJ
Posts: 1,221
|
Quote:
Originally Posted by 97BlackAckCL
So I finally got around to tinting my new CarTrimHome sequential turn signals. I had originally done this on a stock replacement set, but wanted to give the sequentials a try.
First I masked everything off
Then I sprayed them with 5 coats of VHT
Then I wet-sanded the tint to smooth it out
Then applied a few coats of clear
Then I wet-sanded the clear smooth and polished them by hand till they looked like glass
Here's a side by side of my stock tinted set and the new tinted CarTrim set
And here they are all installed, way happier with this tint job than my first try on the stock ones I had previously.
And here's a shot of the sequential, they are WAY brighter than the stock turn signals even tinted dark.
|
which vht and clear did you use?
__________________
Troner envy... the struggle is real!
|
|
Reply With Quote
|
11-14-2019, 02:15 AM
|
#40587
|
|
Member
|
|
Join Date: Oct 2016
Location: Oxnard
Posts: 819
|
|
Member
Join Date: Oct 2016
Location: Oxnard
Posts: 819
|
Quote:
Originally Posted by Motory
|
Haaaa good times gods times
__________________
Mods are loading.......
|
|
Reply With Quote
|
11-14-2019, 02:15 AM
|
#40588
|
|
Member
|
|
Join Date: Oct 2016
Location: Oxnard
Posts: 819
|
|
Member
Join Date: Oct 2016
Location: Oxnard
Posts: 819
|
Quote:
Originally Posted by Motory
|
Awwww good times good times
__________________
Mods are loading.......
|
|
Reply With Quote
|
11-14-2019, 10:24 AM
|
#40589
|
|
Elite Member
|
|
Join Date: Mar 2010
Location: Pittsburgh
Posts: 5,689
Real Name: Chris
|
|
Elite Member
Join Date: Mar 2010
Location: Pittsburgh
Posts: 5,689
Real Name: Chris
|
Quote:
Originally Posted by CF_Machete
which vht and clear did you use?
|
Nightshade and Krylon clear
__________________
2017 Nautical Blue SR5 Premium - Black Emblems, AFE 76mm TB, AFE Momentum GT Intake, URD MAF Calibrator, Borla Touring Cat-Back Exhaust, VR ECU Tune, RCI Skid Plate, Morimoto MLED 2.0 Headlight Retrofit, Morimoto LED Fogs, Eagle Eye Smoked Black Tail Lights, FyreFlys LED Interior, Meso Puddle Lights, Tinted Mirror Turn Signals, Smoked Amber Raptor Lights, Odyssey 34 Battery, 32" LED Bar with Rago Hidden Brackets, Rago Molle Panels, Side Shooter LED Ditch Lights, sPod w/ PowerTray, Raceline Matte Bronze Wheels w/ Cooper Discoverer RTX, CaliRaised Rock Sliders, BajaRack Full Length Roof Rack, Kenwood DMX1057XR, Infinity Kappa Door Speakers and 3.5's in dash, JL 8w3v3 in JBL Enclosure, Husky Weather Beaters, Blackvue DR900S Dash Cams
|
|
Reply With Quote
|
11-14-2019, 10:38 AM
|
#40590
|
Junior Member
|
|
Join Date: Nov 2019
Location: Boston, MA
Posts: 11
|
|
Junior Member
Join Date: Nov 2019
Location: Boston, MA
Posts: 11
|
This week:
Shampoo'd the carpets after a terrible coffee spill with a Home Depot hand held carpet cleaner, (HIGHLY recommend)! Also, if you ever have a smell that you can't get rid of, use pet cleaner with enzymes; it's the only thing that ever worked for me. Pro tip!
|
|
Reply With Quote
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
|