05-09-2017, 01:03 PM
|
#1
|
Junior Member
|
|
Join Date: Feb 2017
Posts: 26
|
|
Junior Member
Join Date: Feb 2017
Posts: 26
|
Magnetic Grey color match vinyl or dip
Hello Everyone,
After searching around I could not find a thread on getting the front and rear bumpers on the Magnetic Grey 5th Gen Trail's to match the rest of the 4Runner. I'm considering plastic dipping or vinyl wrapping them but was curious if anyone has a good source for the materials that match the best.
thank you for the knowledge and experience for best way to proceed
|
|
Reply With Quote
|
05-09-2017, 01:30 PM
|
#2
|
Member
|
|
Join Date: Apr 2017
Location: Columbia, SC
Posts: 335
|
|
Member
Join Date: Apr 2017
Location: Columbia, SC
Posts: 335
|
Quote:
Originally Posted by Ashby
Hello Everyone,
After searching around I could not find a thread on getting the front and rear bumpers on the Magnetic Grey 5th Gen Trail's to match the rest of the 4Runner. I'm considering plastic dipping or vinyl wrapping them but was curious if anyone has a good source for the materials that match the best.
thank you for the knowledge and experience for best way to proceed
|
If you want cheap then plasti dip is best. The problem with either plasti dip or vinyl, is that beings the bumpers are silver underneath, rocks and road debris will chip the front pretty easy and the silver will stick out like a sore thumb. I am pretty picky and that would probably bug me.
While spendy, for $330 shipped you can order new factory black trd pro pieces. I actually just did that last weekend, and posted a pic of my wife changing them out in here, within 5 minutes I had a pm from a member interested in the front factory silver piece, and ended up trading him the piece for a good amount of ammo. Win win for both of us and took the sting off the $330 as well.
That aside, many members have been very happy with either plasti dip or vinyl, vinyl being more durable. I definitely wouldn't pay too much for vinyl though with the trd pro option being a bit more.
|
|
Reply With Quote
|
05-09-2017, 01:30 PM
|
#3
|
|
Junior Member
|
|
Join Date: Apr 2017
Location: Salt Lake City
Posts: 23
Real Name: Dave
|
|
Junior Member
Join Date: Apr 2017
Location: Salt Lake City
Posts: 23
Real Name: Dave
|
Quote:
Originally Posted by Ashby
Hello Everyone,
After searching around I could not find a thread on getting the front and rear bumpers on the Magnetic Grey 5th Gen Trail's to match the rest of the 4Runner. I'm considering plastic dipping or vinyl wrapping them but was curious if anyone has a good source for the materials that match the best.
thank you for the knowledge and experience for best way to proceed
|
Check this out, don't know if it'd work for you or not...
https://www.amazon.com/gp/product/B0...0?ie=UTF8&th=1
|
|
Reply With Quote
|
05-09-2017, 01:44 PM
|
#4
|
|
Member
|
|
Join Date: Feb 2016
Location: North Carolina
Posts: 481
Real Name: Jacob
|
|
Member
Join Date: Feb 2016
Location: North Carolina
Posts: 481
Real Name: Jacob
|
Quote:
Originally Posted by UtahFox
|
Don't buy that stuff, I tried it with a few parts for my mag grey, and it didn't work. The paint doesn't spray with an even coat, so you get areas that are matte and areas that have the metal flake.
Then it didn't stick to the plastic and started to flake off. I would not try it.
__________________
[
|
|
Reply With Quote
|
05-09-2017, 01:49 PM
|
#5
|
Senior Member
|
|
Join Date: Apr 2016
Location: SouthEast
Posts: 1,291
|
|
Senior Member
Join Date: Apr 2016
Location: SouthEast
Posts: 1,291
|
plastidip in anthracite is what you seek
__________________
____________________________
2015 SR5 w/3rd Row
BRO'd up Grill
2.5/2 5100s F&R, Dobinsons Rear Coils. 275 KO2s (Going 285)
GOBI Stealth, RIGID Radiance, RCI Skids, Alea Leather, Safari Snorkel, ARB Dif Breather
|
|
Reply With Quote
|
05-09-2017, 03:05 PM
|
#6
|
Member
|
|
Join Date: Nov 2011
Location: So Cal
Posts: 167
|
|
Member
Join Date: Nov 2011
Location: So Cal
Posts: 167
|
Automotivetouchup.com can get you the exact spray out in a can. Anything you put on will be susceptible to chipping.
I'd find someone with an SR5 that wants to trade bumpers.
|
|
Reply With Quote
|
05-09-2017, 03:21 PM
|
#7
|
|
Member
|
|
Join Date: Oct 2016
Location: San Antonio, TX
Posts: 490
|
|
Member
Join Date: Oct 2016
Location: San Antonio, TX
Posts: 490
|
I painted mine black using Krylon Fusion for plastics satin black. I sprayed 6 coats of black and 3 coats of clear on the front and back valances. In about a week the black paint on the front valance was already chipping away and the silver underneath was noticeably visible (and annoying). I ended up ordering a black TRD Pro valance for the front. It seems to be a solid piece of black plastic and when it chips it shows black. I assume plastidip and vinyl will chip much like the paint did. If you want black, I'd skip all the extra work and just order the TRD Pro valance (hurts the wallet). If you want MGM, I'd see if you can find a person with an SR5 who wants to swap.
-- OR -- Put more than 3 coats of clear on whatever you paint... maybe the magic number is 3 coats of paint + 7 coats of clear... who knows.
__________________
2022 SR5 Premium 4WD
|
|
Reply With Quote
|
05-09-2017, 03:42 PM
|
#8
|
Junior Member
|
|
Join Date: Oct 2016
Location: Orange County
Posts: 21
|
|
Junior Member
Join Date: Oct 2016
Location: Orange County
Posts: 21
|
Where did you order the parts?
Quote:
Originally Posted by Trixx
If you want cheap then plasti dip is best. The problem with either plasti dip or vinyl, is that beings the bumpers are silver underneath, rocks and road debris will chip the front pretty easy and the silver will stick out like a sore thumb. I am pretty picky and that would probably bug me.
While spendy, for $330 shipped you can order new factory black trd pro pieces. I actually just did that last weekend, and posted a pic of my wife changing them out in here, within 5 minutes I had a pm from a member interested in the front factory silver piece, and ended up trading him the piece for a good amount of ammo. Win win for both of us and took the sting off the $330 as well.
That aside, many members have been very happy with either plasti dip or vinyl, vinyl being more durable. I definitely wouldn't pay too much for vinyl though with the trd pro option being a bit more.
|
__________________
2016 Toyota TEP | Non KDSS | Super White | Front/Rear 2.5" King Shocks with #550lbs Coils Adjusters & Extended | Total Chaos Uniball UCA| OME 889 Rear Coils | SCS Wheels F5/Bronze | Falken Wildpeaks ATW3 P285/70/17 | RCI Full Skid/Gas Tank Bare Aluminum | Outgear Solutions Rack & Sliders | DDM Ultra HID/Ext./Int. LED | Rigid Amber Fogs | SPOD Controller | ARB Single Compressor | Huper Optik Film AVS Visors | JL HD750 Amp | JL W6v3D4 | OEM Audio + | Dynamat
|
|
Reply With Quote
|
05-09-2017, 03:46 PM
|
#9
|
Member
|
|
Join Date: Apr 2017
Location: Columbia, SC
Posts: 335
|
|
Member
Join Date: Apr 2017
Location: Columbia, SC
Posts: 335
|
Quote:
Originally Posted by lucasngo
Where did you order the parts?
|
https://toyotaparts.mcgeorgetoyota.com
I'm in SC, but they showed up like 3 days after placing my order. They were very fast. I also called to confirm the parts and the customer service was friendly and helpful.
|
|
Reply With Quote
|
05-09-2017, 03:52 PM
|
#10
|
|
Member
|
|
Join Date: Oct 2016
Location: San Antonio, TX
Posts: 490
|
|
Member
Join Date: Oct 2016
Location: San Antonio, TX
Posts: 490
|
Quote:
Originally Posted by lucasngo
Where did you order the parts?
|
I ordered from here: Toyota Parts and Accessories - Genuine OEM at Wholesales Prices | Toyota of Dallas
I would have ordered from McGeorge as Trixx did, but the Dallas shop had cheaper shipping for me (I'm in TX). I just googled the part number (53901-35250) and shopped around to find the lowest price when shipping was included.
__________________
2022 SR5 Premium 4WD
|
|
Reply With Quote
|
05-09-2017, 03:58 PM
|
#11
|
Member
|
|
Join Date: Jul 2016
Location: WindyCity
Posts: 52
|
|
Member
Join Date: Jul 2016
Location: WindyCity
Posts: 52
|
I plasti-dipped mine 10 months and 19,000 miles ago and haven't had any issues with chipping. If it does chip it's easy enough to mask it off and spray another coat.
|
|
Reply With Quote
|
05-09-2017, 04:12 PM
|
#12
|
|
Member
|
|
Join Date: Oct 2015
Location: San Antonio
Age: 51
Posts: 83
Real Name: Jeff
|
|
Member
Join Date: Oct 2015
Location: San Antonio
Age: 51
Posts: 83
Real Name: Jeff
|
I plasti-dipped my valances initially to make sure I liked the look. the back held up fine, but the car wash used some bug remover on the front and it melted, so I peeled it off.
I pulled the valances off the truck, scuffed them, primed, and then painted with 3 coats of satin black. the back of course looks fine. there's some chips in the front, but not too bad.
the dip on the tailgate emblems has held up well, but I need to hit the one in the grill again.
dipped
painted
__________________
2016 Midnight Black TEP
Instagram: @jefe_TX
|
|
Reply With Quote
|
05-09-2017, 04:24 PM
|
#13
|
|
Member
|
|
Join Date: Jun 2005
Location: Arlington, TX.
Age: 40
Posts: 269
|
|
Member
Join Date: Jun 2005
Location: Arlington, TX.
Age: 40
Posts: 269
|
You can always spray some bedliner on there...
Sent from my iPhone using Tapatalk
__________________
Current: 2017 TRD Off Road Premium - Magnetic Grey - 295/70/17 Toyo Open Country MT's, Radflo 2.5 w/ Overland Warehouse valving, 17x9 SCS F5 wheels 3.5BS, Light Racing UCA's, Metal Tech rear lower arms, C4 Fab rock sliders
Totaled: 2005 Sport Edition 4WD 4Runner - Black - Overland Warehouse 2.5 coilovers, 275/70/18 Cooper Discoverer STT's, 18x9 ProComp 7089 wheels, JDM Headlights and Silverstars, Magnaflow exhaust.
|
|
Reply With Quote
|
05-10-2017, 07:36 AM
|
#14
|
|
Member
|
|
Join Date: Jan 2016
Location: Syracuse, NY
Posts: 69
|
|
Member
Join Date: Jan 2016
Location: Syracuse, NY
Posts: 69
|
Quote:
Originally Posted by Trik444
You can always spray some bedliner on there...
Sent from my iPhone using Tapatalk
|
This is mine with anthracite plastidip. I like it and think it looks good. It's not an exact color match but a nice off set imho.
Sent from my iPhone using Tapatalk
__________________
2016 MGM TEP - The Mynock
|
|
Reply With Quote
|
04-20-2019, 04:32 PM
|
#15
|
Junior Member
|
|
Join Date: May 2018
Location: Tennessee
Posts: 1
|
|
Junior Member
Join Date: May 2018
Location: Tennessee
Posts: 1
|
I really like the texture of that bedliner on there.... Did you do that yourself(and with what) or was it done by a shop?
Thanks!
|
|
Reply With Quote
|
Thread Tools |
|
Display Modes |
Rate This Thread |
Linear Mode
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is On
|
|
|
|