User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 10-18-2017, 10:26 AM #46
ehcanadian's Avatar
ehcanadian ehcanadian is offline
Member
 
Join Date: Jan 2017
Location: North New Jersey
Age: 28
Posts: 93
ehcanadian is on a distinguished road
ehcanadian ehcanadian is offline
Member
ehcanadian's Avatar
 
Join Date: Jan 2017
Location: North New Jersey
Age: 28
Posts: 93
ehcanadian is on a distinguished road
Quote:
Originally Posted by matoolie View Post
I did a little more research here and it appears the 5th gens do not have TPMS in the spare tires, but the #5 TPMS is in the ECU. Would be good to have for those of use who replace wheels/tires with 5 new ones where all 5 wheels have TPMS and would like to monitor pressure in the spare.

However......our sensors also transmit tire temps (see screenshot below). If you are updating the software for pressure, can temperature also be investigated or added? Just a thought.

Shipped out my ScanGauge II today for update.

Ill be testing the temp code today and will let you know!
__________________
2016 Trail Premium | F: King 2.5 RR Ext | Rear: Icon 2.0 w/ Dobinson Coils | JBA UCA's | FN F(X)Pro Wheels Matte Black | Nitto Ridge Grappler 285/70/17 | Coastal Offroad Front & Rear Bumper | RCI Aluminum Skids | RSG Angled Sliders | Xenon HID | S-Tech Custom 6 Switch Housing
ehcanadian is offline   Reply With QuoteReply With Quote
Old 10-19-2017, 11:54 PM #47
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
Tested my re-imaged Scanguage II today. I had put in the mail last Thursday using regular snail non-priority mail. Got it back yesterday (Wednesday) in a USPS Priority box and very will protected. It was probably better protected than in what I sent them.

All settings were reset back to factory, so be prepared to lose your pre-existing data and renter the settings for your particular vehicle upon first booting up.

New firmware comes with two possible sets of xguages (TP1 through TP5 and TM1 through TM5). There was a note asking to email back with which set reports a reading. @ScanGauge the set that worked on my 2013 4Runner LE was TM. The TP set didn't read anything. As mentioned in post above, TM5 for the spare doesn't report back a reading because my spare doesn't have a TPMS gauge.

It takes up to 20~30 seconds for all 4 gauges to register with the first one registering in only a few seconds. They read a negative number for a while and then start to show the correct reading. The pressure readings increase as the tires warm up as expected. They showed about 2 psi less than my hand held mechanical tire pressure gauge. Not sure which one is right but I think my hand held gauge is a cheap-o so my bet is on the Scanguage.

The Scanguage says one of my tires was a couple pounds less than the rest which was exactly the kind of information I wanted to know. Very happy with the quick turnaround and extra functionality. Thanks again!

PS - @ScanGauge which number represents which tire? I guess I could go out and test with my mechanical gauge but its dark outside.
I am guessing:
TM1 - Driver Front
TM2 - Passenger Front
TM3 - Driver Rear
TM4 - Passenger Rear
__________________
2013 4Runner Limited | OPOR Sliders | BFG KO2 in 275/70R17 on TE Rims |Bilstein 6112/5160s and SAW 1.5" | Some RCI Aluminum Skids | SPOD | Gobi Stealth No-Rise | Aurora 40” and 6” Single Row LED Light Bars

Last edited by cutty01; 10-20-2017 at 08:57 AM.
cutty01 is offline   Reply With QuoteReply With Quote
Old 10-20-2017, 06:11 PM #48
ScanGauge ScanGauge is offline
Junior Member
 
Join Date: Oct 2017
Location: Mesa, AZ
Posts: 20
ScanGauge is on a distinguished road
ScanGauge ScanGauge is offline
Junior Member
 
Join Date: Oct 2017
Location: Mesa, AZ
Posts: 20
ScanGauge is on a distinguished road
Quote:
Originally Posted by matoolie View Post
Cool! Thanks!
Once we get our updated units back, will the pressure XGauges already be programmed in as part of new software? Or will we need to get codes from you and enter them ourselves? You guys will be getting my unit tomorrow, Michael from Virginia.
The XGauges for tire pressure will be pre-programmed in, so you should be able to just plug and play.

Quote:
Originally Posted by cutty01 View Post
Tested my re-imaged Scanguage II today. I had put in the mail last Thursday using regular snail non-priority mail. Got it back yesterday (Wednesday) in a USPS Priority box and very will protected. It was probably better protected than in what I sent them.

All settings were reset back to factory, so be prepared to lose your pre-existing data and renter the settings for your particular vehicle upon first booting up.

New firmware comes with two possible sets of xguages (TP1 through TP5 and TM1 through TM5). There was a note asking to email back with which set reports a reading. @ScanGauge the set that worked on my 2013 4Runner LE was TM. The TP set didn't read anything. As mentioned in post above, TM5 for the spare doesn't report back a reading because my spare doesn't have a TPMS gauge.

It takes up to 20~30 seconds for all 4 gauges to register with the first one registering in only a few seconds. They read a negative number for a while and then start to show the correct reading. The pressure readings increase as the tires warm up as expected. They showed about 2 psi less than my hand held mechanical tire pressure gauge. Not sure which one is right but I think my hand held gauge is a cheap-o so my bet is on the Scanguage.

The Scanguage says one of my tires was a couple pounds less than the rest which was exactly the kind of information I wanted to know. Very happy with the quick turnaround and extra functionality. Thanks again!

PS - @ScanGauge which number represents which tire? I guess I could go out and test with my mechanical gauge but its dark outside.
I am guessing:
TM1 - Driver Front
TM2 - Passenger Front
TM3 - Driver Rear
TM4 - Passenger Rear
Good to hear it's all working - thanks for the feedback! With regard to the tire locations we're not entirely sure. The best way to find out if you can is to let some air out of a tire, see which one drops, then fill it back up and repeat with the next tire.
ScanGauge is offline   Reply With QuoteReply With Quote
Old 10-22-2017, 10:54 AM #49
matoolie's Avatar
matoolie matoolie is offline
Member
 
Join Date: May 2005
Location: Virginia
Posts: 479
matoolie has a spectacular aura about matoolie has a spectacular aura about
matoolie matoolie is offline
Member
matoolie's Avatar
 
Join Date: May 2005
Location: Virginia
Posts: 479
matoolie has a spectacular aura about matoolie has a spectacular aura about
Quote:
Originally Posted by ScanGauge View Post
The XGauges for tire pressure will be pre-programmed in, so you should be able to just plug and play.
Got my unit back yesterday and new tire pressure codes are working. The TM codes work on my truck. Thank you James for the updates and programming work!
__________________
Michael
2021 Pro Lunar Rock: RCI tranny/transfer case/tank skids, Victory roof rack
2014 LE Nautical Blue: 285/70R17 Falken A/T3W, FX Pro wheels, Fox TRD Pro suspension with Wescott lift, Dobinson UCA's, Metal Tech sliders
matoolie is offline   Reply With QuoteReply With Quote
Old 10-22-2017, 12:52 PM #50
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
Quote:
Originally Posted by cutty01 View Post
Which number represents which tire? I guess I could go out and test with my mechanical gauge but its dark outside.
I am guessing:
TM1 - Driver Front
TM2 - Passenger Front
TM3 - Driver Rear
TM4 - Passenger Rear

Silly me! While testing which TM number corresponds to which tire I just realized it’s going to be different for everyone. The ECU and the Scanguage have no idea of your tire rotation and positioning. This means that you will have to retest or remember the rotation order each time you rotate your wheels.



Sent from my iPhone using Tapatalk
__________________
2013 4Runner Limited | OPOR Sliders | BFG KO2 in 275/70R17 on TE Rims |Bilstein 6112/5160s and SAW 1.5" | Some RCI Aluminum Skids | SPOD | Gobi Stealth No-Rise | Aurora 40” and 6” Single Row LED Light Bars
cutty01 is offline   Reply With QuoteReply With Quote
Old 10-22-2017, 01:58 PM #51
phillyd2's Avatar
phillyd2 phillyd2 is offline
Senior Member
 
Join Date: Jan 2006
Location: Bucks County, PA
Posts: 3,600
Real Name: Dave
phillyd2 is a jewel in the rough phillyd2 is a jewel in the rough phillyd2 is a jewel in the rough
phillyd2 phillyd2 is offline
Senior Member
phillyd2's Avatar
 
Join Date: Jan 2006
Location: Bucks County, PA
Posts: 3,600
Real Name: Dave
phillyd2 is a jewel in the rough phillyd2 is a jewel in the rough phillyd2 is a jewel in the rough
Quote:
Originally Posted by cutty01 View Post
Silly me! While testing which TM number corresponds to which tire I just realized it’s going to be different for everyone. The ECU and the Scanguage have no idea of your tire rotation and positioning. This means that you will have to retest or remember the rotation order each time you rotate your wheels.



Sent from my iPhone using Tapatalk
I think I’ll just paint the number on the inside of the tire after determining which is what.

On the screen I’m going to want the results positioned to match the tire’s position on the truck. FDriver = upper left. RPassenger = bottom right. Etc..
__________________
Them Be Me Mods - 2011 Black Limited / Trail Mutt
phillyd2 is offline   Reply With QuoteReply With Quote
Old 10-24-2017, 03:49 AM #52
warnphotography's Avatar
warnphotography warnphotography is offline
Junior Member
 
Join Date: Jan 2017
Location: Orange County, CA
Posts: 5
warnphotography is on a distinguished road
warnphotography warnphotography is offline
Junior Member
warnphotography's Avatar
 
Join Date: Jan 2017
Location: Orange County, CA
Posts: 5
warnphotography is on a distinguished road
So which devices do we buy for a 2016?
warnphotography is offline   Reply With QuoteReply With Quote
Old 10-24-2017, 09:18 AM #53
empty403's Avatar
empty403 empty403 is offline
Member
 
Join Date: Feb 2011
Location: San Jose, CA
Posts: 323
empty403 is on a distinguished road
empty403 empty403 is offline
Member
empty403's Avatar
 
Join Date: Feb 2011
Location: San Jose, CA
Posts: 323
empty403 is on a distinguished road
Quote:
Originally Posted by ScanGauge View Post
Hi Everyone,

I'm James DeLong, and I'm the engineer that worked on the Toyota TPMS XGauges.



I believe the Tire Pressure XGauges we've come up with will work on Tacoma's from 2006 - 2015. If your Tacoma is within that range, feel free to send it in and we'll update it.

I think there's a decent chance what we've come up with will work on most Toyota's with TPMS. If anyone has a non-4Runner Toyota/Lexus/Scion with TPMS feel free to contact us at [email protected] to ask about updating their unit for free to test out what we have. Would love to test this out on as many Toyota/Lexus/Scion vehicles as possible so we can be sure it works well.
James,
Any chance you'll open the cutoff for a 2007 4Runner 😁? Was there a CANBUS change from 2007 to 2008? I had thought 2006-2009 4Rs had the same setup. Thanks!
__________________
2007 Limited V8 FT-4WD
4x4Labs front and rear bumpers, 4.56 Gears with Harrop E-Locker Front & Rear, Icon CVDC w/ 700lbs spring Ext C/Os & Icon MetalTech Long Travel rear CVDC with HD springs, SCS Ray10s with GY MTRs 305/70R17, Prinsu Rack, Rago MSP and ditch light brackets, Wheeler's Super bumpstops
2007 Toyota 4Runner Limited V8 160,000miles
http://www.toyota-4runner.org/4th-ge...-thread-2.html
empty403 is offline   Reply With QuoteReply With Quote
Old 10-24-2017, 07:05 PM #54
ScanGauge ScanGauge is offline
Junior Member
 
Join Date: Oct 2017
Location: Mesa, AZ
Posts: 20
ScanGauge is on a distinguished road
ScanGauge ScanGauge is offline
Junior Member
 
Join Date: Oct 2017
Location: Mesa, AZ
Posts: 20
ScanGauge is on a distinguished road
Quote:
Originally Posted by warnphotography View Post
So which devices do we buy for a 2016?
The ScanGauge 2 is what you'll want. I believe the current TPMS based XGauges will work on the 2016 4Runner.

The firmware that supports these TPMS based XGauge's hasn't been fully released yet though, so to get the correct firmware you'll want to order directly from us at ScanGauge.com.

Quote:
Originally Posted by empty403 View Post
James,
Any chance you'll open the cutoff for a 2007 4Runner 😁? Was there a CANBUS change from 2007 to 2008? I had thought 2006-2009 4Rs had the same setup. Thanks!
I've been looking it over, and I believe I can expand the date range. I believe the TPMS XGauges we have should work on any 4Runner equipped with a TPMS system from 2004 to 2017. If anyone has a 4Runner in that date range and would like to get their ScanGauge updated for free to test out the new TPMS XGauges feel free to send it in! Just include a note indicating that you need the update to test out the Toyota TPMS XGauges.

For anyone who doesn't have a ScanGauge, but would like to have one for the TPMS data (or any of the other data it provides) you can use the coupon code 'T4R' during checkout at ScanGauge.com for a $30 discount. We'll also input all the XGauges we have for Tire Pressure/Temperature before shipping it out.
ScanGauge is offline   Reply With QuoteReply With Quote
Old 10-24-2017, 09:37 PM #55
empty403's Avatar
empty403 empty403 is offline
Member
 
Join Date: Feb 2011
Location: San Jose, CA
Posts: 323
empty403 is on a distinguished road
empty403 empty403 is offline
Member
empty403's Avatar
 
Join Date: Feb 2011
Location: San Jose, CA
Posts: 323
empty403 is on a distinguished road
Quote:
Originally Posted by ScanGauge View Post
The ScanGauge 2 is what you'll want. I believe the current TPMS based XGauges will work on the 2016 4Runner.

The firmware that supports these TPMS based XGauge's hasn't been fully released yet though, so to get the correct firmware you'll want to order directly from us at ScanGauge.com.



I've been looking it over, and I believe I can expand the date range. I believe the TPMS XGauges we have should work on any 4Runner equipped with a TPMS system from 2004 to 2017. If anyone has a 4Runner in that date range and would like to get their ScanGauge updated for free to test out the new TPMS XGauges feel free to send it in! Just include a note indicating that you need the update to test out the Toyota TPMS XGauges.

For anyone who doesn't have a ScanGauge, but would like to have one for the TPMS data (or any of the other data it provides) you can use the coupon code 'T4R' during checkout at ScanGauge.com for a $30 discount. We'll also input all the XGauges we have for Tire Pressure/Temperature before shipping it out.
Thanks James!! I was about to buy a new 4R
__________________
2007 Limited V8 FT-4WD
4x4Labs front and rear bumpers, 4.56 Gears with Harrop E-Locker Front & Rear, Icon CVDC w/ 700lbs spring Ext C/Os & Icon MetalTech Long Travel rear CVDC with HD springs, SCS Ray10s with GY MTRs 305/70R17, Prinsu Rack, Rago MSP and ditch light brackets, Wheeler's Super bumpstops
2007 Toyota 4Runner Limited V8 160,000miles
http://www.toyota-4runner.org/4th-ge...-thread-2.html

Last edited by empty403; 10-24-2017 at 09:39 PM.
empty403 is offline   Reply With QuoteReply With Quote
Old 11-03-2017, 11:47 AM #56
hydrabyte's Avatar
hydrabyte hydrabyte is offline
Member
 
Join Date: Feb 2011
Location: Sunshine state
Posts: 35
hydrabyte is on a distinguished road
hydrabyte hydrabyte is offline
Member
hydrabyte's Avatar
 
Join Date: Feb 2011
Location: Sunshine state
Posts: 35
hydrabyte is on a distinguished road
THANK YOU James!
2012 Tacoma, upgrade works like a charm!
Shipped Saturday 2 day USPS, returned Wednesday, Super fast return.

Kudos again to all involved at Scan Gauge...Outstanding!
__________________
1987, SR5, 22re, auto
170k miles & counting
New paint, stripes
OME 2" w/UBJ lift
33x10.5x15 & US Wheels 94-5860 15x8
hydrabyte is offline   Reply With QuoteReply With Quote
Old 11-03-2017, 12:32 PM #57
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
@ScanGauge (or anyone on this forum) is there a function on the Scangauge II to have "presets" to quickly rotate through saved groups of 4 guages?

Now I have my tires set to the order of tire rotation (left top gauge is driver front, left bottom gauge is driver rear, etc) it would be nice to save all 4 settings saved as a preset screen. I would love to have the ability to have other user defined presets for groups of 4 gauges for things like gas mileage, performance, temps, etc.

As-is now, I have to cycle through all buttons each time I want to see the gauges I want to see at once. It wasn't such a problem before, but now that I have the tire gauges and want them to display in a certain order, its a PITA to cycle through the buttons when I want to switch to other gauges and back again.

Is this something that you could program into the next firmware release?
__________________
2013 4Runner Limited | OPOR Sliders | BFG KO2 in 275/70R17 on TE Rims |Bilstein 6112/5160s and SAW 1.5" | Some RCI Aluminum Skids | SPOD | Gobi Stealth No-Rise | Aurora 40” and 6” Single Row LED Light Bars
cutty01 is offline   Reply With QuoteReply With Quote
Old 11-03-2017, 01:24 PM #58
BullRNR's Avatar
BullRNR BullRNR is offline
Member
 
Join Date: Apr 2017
Location: Evergreen, CO
Posts: 59
Real Name: Phil
BullRNR is on a distinguished road
BullRNR BullRNR is offline
Member
BullRNR's Avatar
 
Join Date: Apr 2017
Location: Evergreen, CO
Posts: 59
Real Name: Phil
BullRNR is on a distinguished road
Hey James, I just placed my order directly with ScanGuage and threw a note in the order notes section, thanks for the discount! Can you have this programming is done prior to shipment?

Thank you, Phil Brooks

Quote:
Originally Posted by ScanGauge View Post
The ScanGauge 2 is what you'll want. I believe the current TPMS based XGauges will work on the 2016 4Runner.

The firmware that supports these TPMS based XGauge's hasn't been fully released yet though, so to get the correct firmware you'll want to order directly from us at ScanGauge.com.



I've been looking it over, and I believe I can expand the date range. I believe the TPMS XGauges we have should work on any 4Runner equipped with a TPMS system from 2004 to 2017. If anyone has a 4Runner in that date range and would like to get their ScanGauge updated for free to test out the new TPMS XGauges feel free to send it in! Just include a note indicating that you need the update to test out the Toyota TPMS XGauges.

For anyone who doesn't have a ScanGauge, but would like to have one for the TPMS data (or any of the other data it provides) you can use the coupon code 'T4R' during checkout at ScanGauge.com for a $30 discount. We'll also input all the XGauges we have for Tire Pressure/Temperature before shipping it out.
__________________
2016 TEP w/KDSS - Total Chaos Expedition +2 Long Travel, Accutune Fox DSC 2.5" LT Coilovers & Accutune Fox 2.5" modified Tundra rears, ARB Summit Bumber, Nguyen Works Rear Bumper, DR_KDSS errything (switch, clamps, front brackets, BOTCK), RCI Armor, BajaRack, Baja Designs, Sumosprings bumpstops, 17"x9" +0 Enkei RPT1's, Yokohama Geolandar G0003 285/75/17 (34.1"), 4.56 Nitro gears, +random bolt-ons
BullRNR is offline   Reply With QuoteReply With Quote
Old 11-03-2017, 08:52 PM #59
4Roamer 4Roamer is offline
Member
 
Join Date: Nov 2016
Location: Denver Colorado
Posts: 75
4Roamer is on a distinguished road
4Roamer 4Roamer is offline
Member
 
Join Date: Nov 2016
Location: Denver Colorado
Posts: 75
4Roamer is on a distinguished road
@Scanguage This has probably been answered somewhere but, can you get transmission temp with the scanguage2? 2016 4Runner.
__________________
2016 4Runner, TEP, white. TRD black rims. ARB compressor (engine bay). Anytime backup cam mod. Gobi Stealth - No rise. ARB awning w/gen 2 room.
4Roamer is offline   Reply With QuoteReply With Quote
Old 11-04-2017, 10:07 PM #60
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
cutty01 cutty01 is offline
Member
 
Join Date: Jul 2015
Location: SF Bay Area, CA
Posts: 693
cutty01 will become famous soon enough
Quote:
Originally Posted by 4Roamer View Post
@Scanguage This has probably been answered somewhere but, can you get transmission temp with the scanguage2? 2016 4Runner.
Here is the XGUAGE code to program it in, but I think it may already be there as TFT.
__________________
2013 4Runner Limited | OPOR Sliders | BFG KO2 in 275/70R17 on TE Rims |Bilstein 6112/5160s and SAW 1.5" | Some RCI Aluminum Skids | SPOD | Gobi Stealth No-Rise | Aurora 40” and 6” Single Row LED Light Bars
cutty01 is offline   Reply With QuoteReply With Quote
Reply

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Attn: WMW Owners, Photos needed! Whitson Metalworks 3rd gen T4Rs 18 08-02-2014 10:44 PM
Attn: WMW Owners, Photos needed! Whitson Metalworks 4th Gen T4Rs 7 07-23-2014 11:45 AM
Attn: 5th Gen Owners in SO Cal!!! Brock@Lucrum 5th gen T4Rs 26 04-10-2011 03:58 AM
Attn:Michigan -Generation 1 or 2 owners Ron Helmuth Classic T4Rs 0 06-08-2007 12:25 PM
ATTN: 2006 owners...? gas mileage Sempeboost 4th Gen T4Rs 10 11-30-2005 08:51 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 06:35 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020