Procomp 2.25" spacers in the front.

Did u sell them?

OMG! I'm in the same process of lifting my 2015 pro.

I added some front end weight by adding the SSO bumper and Warn winch. I got my hands on a set of FJPro suspension as a spare.

I've also did lots of reading/research and debating with the weight i added if i should replace my 4R with the FJPro suspension or just buy the Bilstein 650 springs and slap it on my 4R suspension.

I'm also going with the toytec 2" lift which i just received in the mail today.

Any advice would be appreciated.

Sorry to bump an old thread but I am a new 4runner owner and need some help understanding what can and cannot be done to the TRD Pro Fox suspension.

I recently purchased a preowned 2018 TRD Offroad w/ KDSS and my friend sold me his Fox suspension off his 2019 TRDP for cheap.

I have them installed but have since added a winch, bumper, full engine skid and rock sliders. I would like to change the springs but am not sure what I can swap in.

I know Eibach makes springs for the TRDP Fox suspension but I am in Canada and they're backordered for months here.

I recently contacted Icon to see if they had springs that would work, specifically the 158508 (front) and 52700 (rear) but was told neither of the springs are designed to work with the factory fox assemblies and that they don't have any springs that will work with the Fox factory assemblies.

I also have access to a free pair of new OME 885 fronts, would those work?

Sorry for the long post but I am lost with what to do.

The icon 158504 will work in the front as others have done this with the Fox shocks. For the rear you can do anything, dobinsons, king, OME etc, just limit the lift height to about an inch.


Sent from my iPhone using Tapatalk

Thanks for the reply! Weird that Icon told me nothing works

If the 158504 work I would assume the 158508 would also work as they're 14" 700# coils for 2.5" coilovers vs the 13" 650# for the 158504?

Icon told me the same. I understand, they supply shocks too, so would be reluctant to sell the lower cost (margin?) springs. King didn’t even respond to my inquiry, though. I was looking for something for the ‘21 Pro since I had the TSB done.


Sent from my iPhone using Tapatalk