User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 01-14-2019, 01:58 PM #16
Offwidth Offwidth is offline
Member
 
Join Date: Nov 2018
Posts: 120
Offwidth is on a distinguished road
Offwidth Offwidth is offline
Member
 
Join Date: Nov 2018
Posts: 120
Offwidth is on a distinguished road
What is the most lightweight winch with about 10k pull (obviously synthetic rope to be used)
Offwidth is offline   Reply With QuoteReply With Quote
Old 01-14-2019, 03:14 PM #17
a t l a s's Avatar
a t l a s a t l a s is offline
Member
 
Join Date: Nov 2017
Location: Bay Area
Posts: 122
Real Name: Chris
a t l a s has a spectacular aura about a t l a s has a spectacular aura about
a t l a s a t l a s is offline
Member
a t l a s's Avatar
 
Join Date: Nov 2017
Location: Bay Area
Posts: 122
Real Name: Chris
a t l a s has a spectacular aura about a t l a s has a spectacular aura about
Quote:
Originally Posted by Offwidth View Post
What is the most lightweight winch with about 10k pull (obviously synthetic rope to be used)
The Warn VR10-S is only 59 pounds. I was surprised with how compact and light it was.

I believe the Smittybilt x20 is 67 pounds.
__________________
2018 TRD ORP w/ KDSS: King extended travel coilovers & shocks w/ adjusters - Icon tubular Delta Joint UCAs - Icon 2" rear springs - 17x9 -38 offset Stealth Custom Series stealth blue F5 wheels - 305/70R17 Nitto Ridge Grappler tires - C4 Fab Lo-Pro bumper - Baja Designs 30" S8 - Baja Designs Squadron Sport fogs - TRD Pro grille and rear bumper valance - Full custom audio system w/ CarPlay - URD MAF calibrator - Sprint Booster - RCI skid plate - Shrockworks angled sliders - Front Runner roof rack and Maxtrax mount - Xenon Depot Xtreme HID Philips 4300K low beams - ARB on-board air compressor w/ Rago Fab mount - Wifey 4-corner air system - Warn VR10-S winch w/ Factor 55 fairlead and Ultrahook - Odyssey 34R-PC1500T battery - Voltage booster - T4RPAM with Yaesu FTM-400XDR radio and Android tablet running Backcountry Navigator and APRSdroid
a t l a s is offline   Reply With QuoteReply With Quote
Old 01-14-2019, 03:33 PM #18
Offwidth Offwidth is offline
Member
 
Join Date: Nov 2018
Posts: 120
Offwidth is on a distinguished road
Offwidth Offwidth is offline
Member
 
Join Date: Nov 2018
Posts: 120
Offwidth is on a distinguished road
Quote:
Originally Posted by a t l a s View Post
The Warn VR10-S is only 59 pounds. I was surprised with how compact and light it was.

I believe the Smittybilt x20 is 67 pounds.
Could it be due to x20 being more waterproof I wonder.
Offwidth is offline   Reply With QuoteReply With Quote
Old 01-14-2019, 06:30 PM #19
dade73 dade73 is offline
Member
 
Join Date: Jul 2016
Location: MD
Posts: 291
Real Name: Mike
dade73 will become famous soon enough
dade73 dade73 is offline
Member
 
Join Date: Jul 2016
Location: MD
Posts: 291
Real Name: Mike
dade73 will become famous soon enough
I kept mine on. Actually had to use it this weekend. Nice feature, the remote turns itself off after a few minutes of inactivity.
Attached Images
What winches are you guys running in the C4 lo-pro bumper?-fb_img_1547504401946-jpg 
__________________
Humankind cannot gain anything without first giving something in return. To obtain, something of equal value must be lost.
dade73 is offline   Reply With QuoteReply With Quote
Old 09-10-2020, 08:25 AM #20
kgp1603 kgp1603 is offline
Junior Member
 
Join Date: Feb 2020
Location: Dallas TX
Posts: 14
kgp1603 is on a distinguished road
kgp1603 kgp1603 is offline
Junior Member
 
Join Date: Feb 2020
Location: Dallas TX
Posts: 14
kgp1603 is on a distinguished road
Planning on the Warn VR 10S. Anyone have any tips on the install with the C4 low pro?

Does anyone do in line fuses with their winch or straight connection to primary battery?
kgp1603 is offline   Reply With QuoteReply With Quote
Old 09-10-2020, 08:58 AM #21
Mudballz's Avatar
Mudballz Mudballz is offline
Member
 
Join Date: Mar 2019
Location: Nyc
Posts: 628
Mudballz has a spectacular aura about Mudballz has a spectacular aura about Mudballz has a spectacular aura about
Mudballz Mudballz is offline
Member
Mudballz's Avatar
 
Join Date: Mar 2019
Location: Nyc
Posts: 628
Mudballz has a spectacular aura about Mudballz has a spectacular aura about Mudballz has a spectacular aura about
Cool

I have a vr12 but held by victory aluminum blitz bumper fits nice works even better see it on my avitar
Mike
Mudballz is offline   Reply With QuoteReply With Quote
Old 11-26-2020, 12:30 PM #22
DannyLlama's Avatar
DannyLlama DannyLlama is offline
Elite Member
 
Join Date: Sep 2011
Location: SOCAL OC
Posts: 5,194
Real Name: Danny
DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough
DannyLlama DannyLlama is offline
Elite Member
DannyLlama's Avatar
 
Join Date: Sep 2011
Location: SOCAL OC
Posts: 5,194
Real Name: Danny
DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough
For those who have installed the Smittybilt X2O on the C4 hybrid bumper. Experience, feedback?

Also, which models fit, is it only in pro comp. I would like the waterproof model. Specific model numbers will help.

For example is this it

Attention Required! | Cloudflare
__________________
2010 LE > TE Conversion, Fox 2.5 DSC Front W/ Camburg BJ UCA's Fox 2.5 Resi rear W/ Icons. Method 701's, Cooper S/T Maxx 285/70/17. Shrockworks sliders. LLama Tales
Dual Battery Thread
DannyLlama is offline   Reply With QuoteReply With Quote
Old 11-27-2020, 02:02 AM #23
DannyLlama's Avatar
DannyLlama DannyLlama is offline
Elite Member
 
Join Date: Sep 2011
Location: SOCAL OC
Posts: 5,194
Real Name: Danny
DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough
DannyLlama DannyLlama is offline
Elite Member
DannyLlama's Avatar
 
Join Date: Sep 2011
Location: SOCAL OC
Posts: 5,194
Real Name: Danny
DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough DannyLlama is a jewel in the rough
Bump
__________________
2010 LE > TE Conversion, Fox 2.5 DSC Front W/ Camburg BJ UCA's Fox 2.5 Resi rear W/ Icons. Method 701's, Cooper S/T Maxx 285/70/17. Shrockworks sliders. LLama Tales
Dual Battery Thread
DannyLlama is offline   Reply With QuoteReply With Quote
Old 12-17-2020, 03:53 PM #24
mteolus's Avatar
mteolus mteolus is offline
Senior Member
 
Join Date: Aug 2017
Location: Dallas, TX
Posts: 1,505
mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold
mteolus mteolus is offline
Senior Member
mteolus's Avatar
 
Join Date: Aug 2017
Location: Dallas, TX
Posts: 1,505
mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold
Where is everyone mounting the control box? Any issues? I have an LFD Hybrid I am about to install and I have the Ironman 12,000 winch but you can't mount the control box on top of the winch. I am working on moving the control box to the empty space by the air intake like this video.

5th Gen 4Runner - Winch Solenoid Box Relocation - YouTube
__________________
2017 Off-road Premium w KDSS, moon roof, sliding rear cargo deck,3" Toytech Boss lift, SPC upper control arms, Sonoran Steel High Articulation KDSS Trac/PanHard Bar, RCI sliders, RCI skid plates aluminum including gas tank, C4 Fab diff skid plate, SCS Ray 10 Wheels Matte Gray, 285/70R17 Hankook Dynapro AT2 RF11 E-load RWL, Cali Raised LED 3x2 fog-light pods, Lock'r Down EXxtreme console safe with electronic lock, Auto Heat Shield all windows, Raingler rear cargo net, Canvasback rear covers, LFD Off-Road cross bars aluminum, LFD Hybrid bumper, LFD wind fairing, LFD Hi-lift jack mounts, Goat Armor, Blackgate Custom KDSS spacers, Ironman 2.5 awning with quick release mounts, Ironman 12,000 lb synthetic line winch.
mteolus is offline   Reply With QuoteReply With Quote
Old 04-05-2021, 03:17 PM #25
Lukchut Lukchut is offline
Junior Member
 
Join Date: Oct 2020
Posts: 8
Lukchut is on a distinguished road
Lukchut Lukchut is offline
Junior Member
 
Join Date: Oct 2020
Posts: 8
Lukchut is on a distinguished road
Quote:
Originally Posted by a t l a s View Post
I decided to give the Warn VR10-S a try and it did indeed fit. I did have to move the hard line running horizontally across the radiator though and it is sitting on top of the control pack.

Picture/rig looks awesome! I am doing the same install in a few weeks (C4 LoPro, BD 30in, and Warn VR10-S). Any tips that might come in handy? Did you need to buy anything extra to get it all installed? I am hoping the AC condenser line is the only thing I need to modify. TIA!
Lukchut is offline   Reply With QuoteReply With Quote
Old 04-06-2021, 10:29 AM #26
mteolus's Avatar
mteolus mteolus is offline
Senior Member
 
Join Date: Aug 2017
Location: Dallas, TX
Posts: 1,505
mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold
mteolus mteolus is offline
Senior Member
mteolus's Avatar
 
Join Date: Aug 2017
Location: Dallas, TX
Posts: 1,505
mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold mteolus is a splendid one to behold
I got mine installed successfully with the control box mounted up by the air intake. Mine is 12,000 lb and weighs 62 lb and is waterproof. There is a breather that they supplied that I routed way up into the engine compartment by the winch control box.
Attached Images
What winches are you guys running in the C4 lo-pro bumper?-winch-jpg 
__________________
2017 Off-road Premium w KDSS, moon roof, sliding rear cargo deck,3" Toytech Boss lift, SPC upper control arms, Sonoran Steel High Articulation KDSS Trac/PanHard Bar, RCI sliders, RCI skid plates aluminum including gas tank, C4 Fab diff skid plate, SCS Ray 10 Wheels Matte Gray, 285/70R17 Hankook Dynapro AT2 RF11 E-load RWL, Cali Raised LED 3x2 fog-light pods, Lock'r Down EXxtreme console safe with electronic lock, Auto Heat Shield all windows, Raingler rear cargo net, Canvasback rear covers, LFD Off-Road cross bars aluminum, LFD Hybrid bumper, LFD wind fairing, LFD Hi-lift jack mounts, Goat Armor, Blackgate Custom KDSS spacers, Ironman 2.5 awning with quick release mounts, Ironman 12,000 lb synthetic line winch.
mteolus is offline   Reply With QuoteReply With Quote
Old 04-08-2021, 11:40 PM #27
firegod33r's Avatar
firegod33r firegod33r is offline
Member
 
Join Date: Feb 2010
Location: Maryland
Posts: 87
firegod33r is on a distinguished road
firegod33r firegod33r is offline
Member
firegod33r's Avatar
 
Join Date: Feb 2010
Location: Maryland
Posts: 87
firegod33r is on a distinguished road
Quote:
Originally Posted by Lukchut View Post
Picture/rig looks awesome! I am doing the same install in a few weeks (C4 LoPro, BD 30in, and Warn VR10-S). Any tips that might come in handy? Did you need to buy anything extra to get it all installed? I am hoping the AC condenser line is the only thing I need to modify. TIA!
I just started doing my install today. C4LoPro with 30 inch extreme led and Warn VR EVO 12S (the 10S and 12S have the exact same dimensions)
The AC line was no issue. In fact I prematurely moved it 1/2 inch thinking I had to and then once I installed the bumper I saw that the winch wasn’t anywhere near the AC like. The power steering line however is a different story.

I didn’t want to relocate my Warn control box so I had to unscrew both power steering brackets from the truck and lift it up using a zip tie. I secured it to the long metal bracket that goes up vertically in front of the radiator (see pic) and I wrapped the area touching the box with electrical tap.
Then I left line resting on top of the box for a few hours so it stretches the flexible hoses on both end of the power steering line and to make sure the angel wasn’t sever enough to cause issue or leaks.
I then loosened the holding brackets that clamp on to the power steering line and then attached the bracket back to the truck, but allowing the line to move freely inside the holder (once you see it, it’ll make sense)
At first it looked like it was gonna stretch things out a bit too much. So I slowly tightened everything down starting on the passenger side and checked for stresses and it looked good.
The passenger bracket lines up pretty well. The driver side is the one that starts pulling on the line. I think ideally bending that bracket back about 1/2 would put a little less stress on the lines so may do that tomorrow. Check the pics and let me know if you have any questions. Cheers!

The last pic is of the flexible hose that allows for this flex to take place. That’s what you want to pay attention to, to make sure it’s not stretching out too much and causing the clamps to fail or open.
Attached Images
What winches are you guys running in the C4 lo-pro bumper?-05513b6e-74e2-47ba-bddb-30af5422ce41-jpg  What winches are you guys running in the C4 lo-pro bumper?-4c4d28fd-7e5e-4bb6-a94b-c78f476b60c3-jpg  What winches are you guys running in the C4 lo-pro bumper?-9f894e7c-4c20-48a3-b164-096a6d4e362a-jpg  What winches are you guys running in the C4 lo-pro bumper?-d8ac03b4-b6ec-445e-af53-20ba330b531f-jpg  What winches are you guys running in the C4 lo-pro bumper?-298174e8-c5ef-48d6-9b06-aa76862de33e-jpg 
firegod33r is offline   Reply With QuoteReply With Quote
Old 04-10-2021, 12:10 AM #28
Lukchut Lukchut is offline
Junior Member
 
Join Date: Oct 2020
Posts: 8
Lukchut is on a distinguished road
Lukchut Lukchut is offline
Junior Member
 
Join Date: Oct 2020
Posts: 8
Lukchut is on a distinguished road
Quote:
Originally Posted by firegod33r View Post
I just started doing my install today. C4LoPro with 30 inch extreme led and Warn VR EVO 12S (the 10S and 12S have the exact same dimensions)
The AC line was no issue. In fact I prematurely moved it 1/2 inch thinking I had to and then once I installed the bumper I saw that the winch wasn’t anywhere near the AC like. The power steering line however is a different story.

I didn’t want to relocate my Warn control box so I had to unscrew both power steering brackets from the truck and lift it up using a zip tie. I secured it to the long metal bracket that goes up vertically in front of the radiator (see pic) and I wrapped the area touching the box with electrical tap.
Then I left line resting on top of the box for a few hours so it stretches the flexible hoses on both end of the power steering line and to make sure the angel wasn’t sever enough to cause issue or leaks.
I then loosened the holding brackets that clamp on to the power steering line and then attached the bracket back to the truck, but allowing the line to move freely inside the holder (once you see it, it’ll make sense)
At first it looked like it was gonna stretch things out a bit too much. So I slowly tightened everything down starting on the passenger side and checked for stresses and it looked good.
The passenger bracket lines up pretty well. The driver side is the one that starts pulling on the line. I think ideally bending that bracket back about 1/2 would put a little less stress on the lines so may do that tomorrow. Check the pics and let me know if you have any questions. Cheers!

The last pic is of the flexible hose that allows for this flex to take place. That’s what you want to pay attention to, to make sure it’s not stretching out too much and causing the clamps to fail or open.
Thanks for the details! I have the same goal, I don’t want to relocate the Warn control box. Glad you were able to make it work. I’ll post back once I start my install.
Lukchut is offline   Reply With QuoteReply With Quote
Old 04-10-2021, 12:19 AM #29
daytonaviolet's Avatar
daytonaviolet daytonaviolet is offline
Senior Member
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
daytonaviolet daytonaviolet is offline
Senior Member
daytonaviolet's Avatar
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
Anyone install an extreme 30” x6s slim amber/white light bar to there C4 low pro winch ? If so what did your brackets from C4 look like ? I’m having a 1/2” gap from front of the light bar to the inside of the bumper.

Is that normal ? Here’s me bracket form C4.


daytonaviolet is offline   Reply With QuoteReply With Quote
Old 04-10-2021, 08:24 AM #30
jk24runner's Avatar
jk24runner jk24runner is offline
Member
 
Join Date: Aug 2016
Location: Berthoud, CO
Posts: 96
Real Name: Nick
jk24runner is on a distinguished road
jk24runner jk24runner is offline
Member
jk24runner's Avatar
 
Join Date: Aug 2016
Location: Berthoud, CO
Posts: 96
Real Name: Nick
jk24runner is on a distinguished road
I put the warm 10-s platinum in mine. I had to do some magic with my supercharger, but everything else fit just fine. I put some rubber hose over the power steering line that contacts the control box and left the bolts out.
jk24runner is offline   Reply With QuoteReply With Quote
Reply

Tags
bumper , fit , guys , running , winches

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
What Winches are you running on your 5th Gen Hidden winch mounts ? nglayton 5th gen T4Rs 16 04-28-2020 11:52 PM
Savage Front Bumper - Winches Installed TonyB66 3rd gen T4Rs 32 08-15-2019 12:03 PM
2WD guys....what tires are you running? SurfnSun 3rd gen T4Rs 45 11-08-2016 12:49 PM
Which AT tires are you guys running? MURKY 5th gen T4Rs 6 08-25-2014 04:22 PM
For you guys running 33's on 16x7's ryankmasuda 3rd gen T4Rs 18 04-04-2011 12:52 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 06:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020