2014+ T4R Tri-LED Projector / Sequential Headlights - Page 45 - Toyota 4Runner Forum

NW.OH.T4R · 12-05-2019, 02:19 PM

Quote:

Originally Posted by gSwift

Okay, well I got everything installed and buttoned up on my Army Green Pro and for the most part, everything works as it should. I am however, getting a intermittent hyper blink on the sequential setting, but they work perfectly on the non-sequential setting.

I'm undecided on which I prefer better, but as easy as it is to switch over, I can change it up if I decide to. So with that said, what have you guys done to fix the hyper blink on the 2020 4Runner? Are people still using a resistor before the split, or is there another fix? I have a email and PM into XD but haven't gotten a response yet

I definitely want them to operate as they should, not matter what blinker setting I decide to use.

I believe there's an additional resistor/relay required for the '20s. I would check with the vendor and have them send one out.

gSwift · 12-05-2019, 03:07 PM

Quote:

Originally Posted by NW.OH.T4R

I believe there's an additional resistor/relay required for the '20s. I would check with the vendor and have them send one out.

Yeah that's what I figured. We'll see how long it takes them to reply to my email.

Steel28 · 12-05-2019, 04:56 PM

@XenonDepot can we have a group buy for these lights?

brtnstrns · 12-05-2019, 06:03 PM

Quote:

Originally Posted by Steel28

@XenonDepot can we have a group buy for these lights?

they just had a pretty huge 20% discount, not sure if it's still going on but I doubt a group buy would beat that

edit: looks like it must have ended in the past couple days

Steel28 · 12-05-2019, 09:12 PM

Quote:

Originally Posted by brtnstrns

they just had a pretty huge 20% discount, not sure if it's still going on but I doubt a group buy would beat that

edit: looks like it must have ended in the past couple days

Thanks, these were sold out quickly and I was too late.

MadeInMaine · 12-09-2019, 06:05 PM

My headlights just got delivered.

How long did install take you guys?

It doesn’t seem to different or time consuming.

Cheers

mrblah · 12-09-2019, 06:36 PM

Quote:

Originally Posted by MadeInMaine

My headlights just got delivered.

How long did install take you guys?

It doesn’t seem to different or time consuming.

Cheers

2 or 3 hours max.

MadeInMaine · 12-09-2019, 10:56 PM

I finally did a thing!

Sorry about the Alaskan winter coating on the car

mrblah · 12-10-2019, 03:25 AM

Quote:

Originally Posted by MadeInMaine

I finally did a thing!

Sorry about the Alaskan winter coating on the car

looking good...

i like the blacked out look

SlugInfinite · 12-10-2019, 02:13 PM

Got these installed on a 2020 TRD Offroad. Hyperflash from both headlights. Pretty frustrating - I sent Xenon Depot a support ticket mid-November specifically asking if hyperflash would be a problem and would they include a resistor - Mike B responded saying that the resistor on the back of the units had been upgraded and hyperflash wasn't a problem. Seems like a fairly significant issue to either lie about, or just get wrong. Sent a support ticket - hopefully they resolve it.

Mike B (XenonDepot)

Nov 22, 08:29 EST

Hello,

Thanks for contacting us! We have about 50 in stock, but they are selling fast! We did have a very small amount of hyper flash issues with those, but we upped the resistance in one of the resistors on the back of the headlight and it fixed the issue for everyone, so no more hyper flash issues! You would not need any extra resistors. Just check out with the links below!

Headlights - 2014+ Toyota 4Runner Morimoto XB LED Headlights | XenonDepot

Fogs - XenonDepot | 2017 Toyota 4RUNNER Morimoto LED Foglights

Let me know if you have any questions!

Mike

Broomsky19 · 12-10-2019, 08:59 PM

Quote:

Originally Posted by SlugInfinite

Got these installed on a 2020 TRD Offroad. Hyperflash from both headlights. Pretty frustrating - I sent Xenon Depot a support ticket mid-November specifically asking if hyperflash would be a problem and would they include a resistor - Mike B responded saying that the resistor on the back of the units had been upgraded and hyperflash wasn't a problem. Seems like a fairly significant issue to either lie about, or just get wrong. Sent a support ticket - hopefully they resolve it.

Mike B (XenonDepot)

Nov 22, 08:29 EST

Hello,

Thanks for contacting us! We have about 50 in stock, but they are selling fast! We did have a very small amount of hyper flash issues with those, but we upped the resistance in one of the resistors on the back of the headlight and it fixed the issue for everyone, so no more hyper flash issues! You would not need any extra resistors. Just check out with the links below!

Headlights - 2014+ Toyota 4Runner Morimoto XB LED Headlights | XenonDepot

Fogs - XenonDepot | 2017 Toyota 4RUNNER Morimoto LED Foglights

Let me know if you have any questions!

Mike

I placed my order on 11/27, received lights on 12/3 and installed 12/7 and had hyperblink on my 20 SR5P. I sent an email about needing the correct resistors on 11/27. Received email yesterday that they were still in transit to XenonDepot. Then got auto-email about 5p saying they shipped to me and will arrive Saturday.

Dillusion · 12-10-2019, 09:30 PM

Dumb question.

But I'm guessing not DOT approved. LOL

cb1111 · 12-10-2019, 09:54 PM

Quote:

Originally Posted by Dillusion

Dumb question.

But I'm guessing not DOT approved. LOL

Of course not

gSwift · 12-10-2019, 10:24 PM

I installed them on my 2020 Pro last week and also have the hyper flash. Emailed them and PM'd them and they told me the same thing about them currently being out of stock

gSwift · 12-11-2019, 01:46 PM

Well, I got an email today that stated I have to remove the headlights from the truck in order to install the new resistors.... But a day ago, I got a PM stating that it was easy to do and could be done if the lights were already installed on the truck

So which is it @XenonDepot ?

Site Navigation