Quote:
Originally Posted by WEAK_E90
I have not put my icons in yet - waiting for the salt to go away
im on 5100 with ome springs. Last night was 24F 25R. Was shooting for relatively the same if not a smidge higher in rear like our boy here.
could be wrong 1 3/4" of thread showing arent you allowed up to 2something? so maybe crank them higher? have you adjusted them from what icon sent them to you at?
@ pheelmeh
you runnin rear spacers stacked on your radflo 2" springs?
|
He is runnin heavy springs i think in the rear, so he may come back down to earth just a smidge when he adds that rear bumper he mentioned when he gave measurements.
With the Icons they state 2" of thread showing should be the max you should go. I know people that are more than 2" of thread showing and me at 1.75" of thread showing could crank on mine a little more without issue. I have definitely adjusted mine from the day that I installed them. My limiting factor is my rear height at this time. It would be easy for me to crank away only to get reverse rake. I just walked outside of work to measure again and i am at 23.75" on all 4 corners. The added weight next week should put me at ~23.25 in the front. I'm just gonna add the weight to the front, see what happens, and adjust from there to try to get the 1/2" to 3/4" of rake i am looking for without letting my OCD get too much in the way.
Side note: My CV's look pretty happy at the 23.75" front and once the front end sits more from the weight and also settles a little more that should be icing on the cake.