User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 09-21-2019, 04:39 PM #46
jawkdna's Avatar
jawkdna jawkdna is offline
Member
 
Join Date: Oct 2016
Location: SFxCA
Posts: 253
jawkdna has a spectacular aura about jawkdna has a spectacular aura about
jawkdna jawkdna is offline
Member
jawkdna's Avatar
 
Join Date: Oct 2016
Location: SFxCA
Posts: 253
jawkdna has a spectacular aura about jawkdna has a spectacular aura about
Just ordered, thanks to this thread.
I've been wanting these for a while and this thread pushed me over the edge.

Front Switchback style:
7443 7444 CANBUS Error Free Dual Color Switchback LED Turn Signal Light - Lasfit Auto Lighting

Rears:
7440 W21W CAN-BUS Anti Hyper Flash LED Turn Signal Lights, Amber Yellow - Lasfit Auto Lighting

and I used the 10% coupon code:
blue_trd_jon1

I tried the 15% one (15SUBTLED) that someone mentioned earlier but it didn't work on my cart.
__________________
"Outgunned, outnumbered, though never outclassed" - Bolt Thrower
XXX
Toyota Trucks Patches, Pins & Stickers | 2016 Trail Premium Edition | Icon Stage 2 | KO2 285s | BlackGate Customs KDSS Rear Sway Bar Drop Kit | RCI Skids | Pelfreybilt Sliders | Gobi Stealth Rack | TRD CAI | Sprint Booster | DuroBumps | Stahlbus Oil Drain Valve
jawkdna is offline   Reply With QuoteReply With Quote
Old 10-08-2019, 08:17 PM #47
Signal Signal is offline
Member
 
Join Date: May 2015
Location: Gulf Coast, AL
Posts: 725
Signal has a spectacular aura about Signal has a spectacular aura about
Signal Signal is offline
Member
 
Join Date: May 2015
Location: Gulf Coast, AL
Posts: 725
Signal has a spectacular aura about Signal has a spectacular aura about
Quote:
Originally Posted by 97BlackAckCL View Post
I used these form my rear

7440 7441 CAN-BUS Anti Hyper Flash LED Turn Signal Lights, Amber Yellow - Lasfit Auto Lighting

And these for my fronts

7443 7444 CANBUS Error Free Dual Color Switchback LED Turn Signal Light - Lasfit Auto Lighting

They are super bright, but they work with no hyper flash, no bulb out warnings and no need to tap any wires with resistors. They can be found cheaper on Amazon and Ebay

I highly recommend them

I am looking to do these what exactly am I looking for on Amazon?
__________________
The Build

2019 TRD ORP, OME 3" lift w/ heavy springs Front and Rear, Kenwood TM-D710GA, ARB Breather, Aux Beam Highs, lows, and fogs, Raptor lights, LFD Rear Bumper
Signal is offline   Reply With QuoteReply With Quote
Old 10-09-2019, 12:59 AM #48
mrblah's Avatar
mrblah mrblah is offline
Senior Member
 
Join Date: Jan 2017
Location: san diego
Posts: 3,193
mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute
mrblah mrblah is offline
Senior Member
mrblah's Avatar
 
Join Date: Jan 2017
Location: san diego
Posts: 3,193
mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute mrblah has a reputation beyond repute
Quote:
Originally Posted by Signal View Post
I am looking to do these what exactly am I looking for on Amazon?
ask and you shall receive!!!

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1
__________________
2016 trail 4runner, twin locked on 34's.
Can read more of my build here (2 parts):
https://www.lasfit.com/blogs/news/ho...ad-build-part1
mrblah is offline   Reply With QuoteReply With Quote
Old 10-16-2019, 12:40 PM #49
4Regrets 4Regrets is offline
Member
 
Join Date: Jan 2017
Location: In Traffic, In the Rain (W.WA)
Posts: 70
Real Name: Ben
4Regrets will become famous soon enough
4Regrets 4Regrets is offline
Member
 
Join Date: Jan 2017
Location: In Traffic, In the Rain (W.WA)
Posts: 70
Real Name: Ben
4Regrets will become famous soon enough
Just ordered the Lasfit front blinkers (all amber, not white/amber), rear blinkers and reverse lights. I waffled on the all amber versus amber/white fronts for a bit, but given that all of my other front illumination is halogen, I thought the 6000K white would stand out too much.

I figured that if I'm going to get into the tail light housing, I might as well get two birds stoned at once and do the reverse lights too.

This should be a nice compliment to the H9 and 9011 headlight upgrade.
__________________
2019 Midnight Black Limited with Beige Interior
275/70R17 Nokian Hakkapeliitta LT3 on FN FX Pro -- Winter
275/70r17 BFG KO2 on stock Trail wheels for summer/shoulder seasons
H11 to H9 low beam conversion

Last edited by 4Regrets; 10-16-2019 at 01:28 PM.
4Regrets is offline   Reply With QuoteReply With Quote
Old 10-24-2019, 06:20 PM #50
tristero's Avatar
tristero tristero is offline
Member
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
tristero tristero is offline
Member
tristero's Avatar
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
I'm running 7443 Lasfit in the 2014+ housing from the 2010-2013 DRL/turn wiring, 90075-60028 socket, and I'm overheating in DRL. They seem fine if just used as turns.

I also burned the sockets and sylvania halogen bulbs running the DRL function...

Would adding in load resistors help? Any other ideas?

pic for reference:
Attached Images
LED turn signals-img_1879-jpg 
__________________
2010 4Runner SR5 Magnetic Gray: Radflo / Icon + Metaltech / Total Chaos / Dirt King / SCS Stealth 6 / BAMF Sliders + Pelfreybilt Bumper / PRINSU / Indel B / 2014+ IS 350 Retrofit
2012 GX460 Premium Black Onyx: Stock af
tristero is offline   Reply With QuoteReply With Quote
Old 10-24-2019, 07:02 PM #51
BigCountryT4R's Avatar
BigCountryT4R BigCountryT4R is offline
Member
 
Join Date: Apr 2016
Location: Abilene, TX
Posts: 263
BigCountryT4R will become famous soon enough
BigCountryT4R BigCountryT4R is offline
Member
BigCountryT4R's Avatar
 
Join Date: Apr 2016
Location: Abilene, TX
Posts: 263
BigCountryT4R will become famous soon enough
Quote:
Originally Posted by tristero View Post
I'm running 7443 Lasfit in the 2014+ housing from the 2010-2013 DRL/turn wiring, 90075-60028 socket, and I'm overheating in DRL. They seem fine if just used as turns.

I also burned the sockets and sylvania halogen bulbs running the DRL function...

Would adding in load resistors help? Any other ideas?

pic for reference:
I've been running the lastfit in my blinkers front and rear for a few weeks now with zero issues. I still need to find a good DRL replacement and just haven't decided on what as I don't want flickering and I want it to dim.
__________________
2019 4Runner Limited in Magnetic Gray Metallic, w/Redwood Interior, and 3rd row. Mods: Lastfit 7440/7443 Led Blinkers | JDM ASTAR LEDs throughout the interior and backup/license plate bulbs | OEM Tundra LED Fog Lights | Morimoto Elite HID 5500k 35w | Xenon Depot Led Pro 9005 w/LED Driver for DRL / XPLORE OFFROAD USA Flag rear windows | Adams Polishes UV Ceramic Paint coating
BigCountryT4R is offline   Reply With QuoteReply With Quote
Old 10-24-2019, 08:35 PM #52
tristero's Avatar
tristero tristero is offline
Member
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
tristero tristero is offline
Member
tristero's Avatar
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
Quote:
Originally Posted by BigCountryT4R View Post
I've been running the lastfit in my blinkers front and rear for a few weeks now with zero issues. I still need to find a good DRL replacement and just haven't decided on what as I don't want flickering and I want it to dim.
Not sure why you quoted me. They work fine in 2014+

Quote:
Originally Posted by tristero View Post
I'm running 7443 Lasfit in the 2014+ housing from the 2010-2013 DRL/turn wiring, 90075-60028 socket, and I'm overheating in DRL. They seem fine if just used as turns.

I also burned the sockets and sylvania halogen bulbs running the DRL function...

Would adding in load resistors help? Any other ideas?
Anyone else have any suggestions?
__________________
2010 4Runner SR5 Magnetic Gray: Radflo / Icon + Metaltech / Total Chaos / Dirt King / SCS Stealth 6 / BAMF Sliders + Pelfreybilt Bumper / PRINSU / Indel B / 2014+ IS 350 Retrofit
2012 GX460 Premium Black Onyx: Stock af
tristero is offline   Reply With QuoteReply With Quote
Old 10-24-2019, 10:45 PM #53
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by tristero View Post
I'm running 7443 Lasfit in the 2014+ housing from the 2010-2013 DRL/turn wiring, 90075-60028 socket, and I'm overheating in DRL. They seem fine if just used as turns.

I also burned the sockets and sylvania halogen bulbs running the DRL function...

Would adding in load resistors help? Any other ideas?

pic for reference:
1. I don’t understand your DRL setup. Doesn’t your rig use the high beam bulb as the OEM DRL function? Did you change something? If you did, see below.

2. You cannot run these particular Lasfit LEDs constantly On. They are designed for occasional use as turn signals. They take a lot of current and are very bright. They incorporate “CANBUS” resistors across the 12v lines which prevent the hyperflash, but the whole bulb gets really hot after a while, even with their best effort to heat sink the bulb. They apparently incorporate a thermal fuse which opens up the resistor path when they get too hot and they go into a hyperflash mode. I notice this with mine if I put the emergency flashers On for several minutes.

From the Lasfit website:

“Since these bulbs built-in Intelligent Temperature Control, if you use for a long time (a few vehicles maybe 2-5 minutes, it depends on year/make/model and temperature) may happen hyper flash, please turn off and cool 1-2 minutes, they will work properly again.”

3. If your setup is getting too hot you are doing something wrong. Wrong bulb for the application.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 10-24-2019, 11:41 PM #54
LRT LRT is offline
Member
 
Join Date: Jan 2015
Posts: 30
LRT is on a distinguished road
LRT LRT is offline
Member
 
Join Date: Jan 2015
Posts: 30
LRT is on a distinguished road
So for the fronts, everyone is ordering the plain amber and not the switchbacks?

Glad to know as I would’ve ordered the switchbacks instead of plain amber.

Quote:
Originally Posted by ElectroBoy View Post
1. I don’t understand your DRL setup. Doesn’t your rig use the high beam bulb as the OEM DRL function? Did you change something? If you did, see below.

2. You cannot run these particular Lasfit LEDs constantly On. They are designed for occasional use as turn signals. They take a lot of current and are very bright. They incorporate “CANBUS” resistors across the 12v lines which prevent the hyperflash, but the whole bulb gets really hot after a while, even with their best effort to heat sink the bulb. They apparently incorporate a thermal fuse which opens up the resistor path when they get too hot and they go into a hyperflash mode. I notice this with mine if I put the emergency flashers On for several minutes.

From the Lasfit website:

“Since these bulbs built-in Intelligent Temperature Control, if you use for a long time (a few vehicles maybe 2-5 minutes, it depends on year/make/model and temperature) may happen hyper flash, please turn off and cool 1-2 minutes, they will work properly again.”

3. If your setup is getting too hot you are doing something wrong. Wrong bulb for the application.
LRT is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 01:03 AM #55
GX4SEVEND's Avatar
GX4SEVEND GX4SEVEND is offline
Senior Member
 
Join Date: Aug 2008
Location: PNW
Age: 42
Posts: 1,395
Real Name: Mike
GX4SEVEND has a spectacular aura about GX4SEVEND has a spectacular aura about
GX4SEVEND GX4SEVEND is offline
Senior Member
GX4SEVEND's Avatar
 
Join Date: Aug 2008
Location: PNW
Age: 42
Posts: 1,395
Real Name: Mike
GX4SEVEND has a spectacular aura about GX4SEVEND has a spectacular aura about
LED turn signals

I’m running the lasfit as well with zero issues. Only the turn signal bulbs not the DRL. No hyper flash and I run them all the time because I have them hookup up to the “raptor lights” so they’re always on and then ridiculously bright when you hit the turn signal.

Using the DDM Saber led lights for the DRL. Super bright as well. No flicker until you take a video of it or try to snap a pic then you can see them pulsing. The naked eye can’t see it.


Sent from my iPhone using Tapatalk
__________________
‘14 SR5 in white
Front: King ext travel 2.5 w/ adjusters, TC UCA/LCA
Rear: King 2.5 shocks w/ adjusters, Dobinson’s 3” Icon Billet lowers, Icon tubular uppers, PCK
Wheels/Tires: SCS SR8’s w/ Toyo MT 35x12.50x17
Full RCI skids
GX4SEVEND is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 02:27 PM #56
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Socket problem?

Quote:
Originally Posted by tristero View Post
I'm running 7443 Lasfit in the 2014+ housing from the 2010-2013 DRL/turn wiring, 90075-60028 socket, and I'm overheating in DRL. They seem fine if just used as turns.

I also burned the sockets and sylvania halogen bulbs running the DRL function...

Would adding in load resistors help? Any other ideas?

pic for reference:
Looking at your post again. If I understand this correctly you updated your 2010 SR5 with the headlight assembly from a 2014 model. If several different bulbs are overheating in your setup and burning or charring the socket, maybe you have a bad socket. Perhaps the bulb doesn’t fit in the socket correctly, and socket electrical contacts don’t grip the bulb contacts properly and it acts like a high resistance and overheats.

In fact, looking on the Olathe Toyota site, the front turn signal socket part number you listed (90075-60028) does not seem to be correct for the 2014 4R model or even the 2010 model. (That part number is meant for a Scion, Prius, or Tacoma). The site lists the part number for the 2014 4R to be 90075-60083. Not sure what the physical difference would be, maybe the gasket or how it threads and seats itself into the housing, providing some way to dissipate heat. Or maybe the contacts are positioned differently. Something to check into. Let us know how you resolve this, good luck.

Socket - Toyota (90075-60028) | Toyota Parts


Socket - Toyota (90075-60083) | Toyota Parts
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 02:54 PM #57
tristero's Avatar
tristero tristero is offline
Member
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
tristero tristero is offline
Member
tristero's Avatar
 
Join Date: Jan 2015
Location: Oakland, California
Posts: 691
Real Name: Justin
tristero will become famous soon enough tristero will become famous soon enough
Quote:
Originally Posted by ElectroBoy View Post
1. I don’t understand your DRL setup. Doesn’t your rig use the high beam bulb as the OEM DRL function? Did you change something? If you did, see below.

2. You cannot run these particular Lasfit LEDs constantly On. They are designed for occasional use as turn signals. They take a lot of current and are very bright. They incorporate “CANBUS” resistors across the 12v lines which prevent the hyperflash, but the whole bulb gets really hot after a while, even with their best effort to heat sink the bulb. They apparently incorporate a thermal fuse which opens up the resistor path when they get too hot and they go into a hyperflash mode. I notice this with mine if I put the emergency flashers On for several minutes.

From the Lasfit website:

“Since these bulbs built-in Intelligent Temperature Control, if you use for a long time (a few vehicles maybe 2-5 minutes, it depends on year/make/model and temperature) may happen hyper flash, please turn off and cool 1-2 minutes, they will work properly again.”

3. If your setup is getting too hot you are doing something wrong. Wrong bulb for the application.
Man that sucks. I never saw that on the Lasfit website, and they still haven't mentioned it after several contacts explaining the bulb needed and purpose even before I ordered. They're supposed to be sending new 7443NA in case there was an issue with the ones I received.

Quote:
Originally Posted by ElectroBoy View Post
Looking at your post again. If I understand this correctly you updated your 2010 SR5 with the headlight assembly from a 2014 model. If several different bulbs are overheating in your setup and burning or charring the socket, maybe you have a bad socket. Perhaps the bulb doesn’t fit in the socket correctly, and socket electrical contacts don’t grip the bulb contacts properly and it acts like a high resistance and overheats.

In fact, looking on the Olathe Toyota site, the front turn signal socket part number you listed (90075-60028) does not seem to be correct for the 2014 4R model or even the 2010 model. (That part number is meant for a Scion, Prius, or Tacoma). The site lists the part number for the 2014 4R to be 90075-60083. Not sure what the physical difference would be, maybe the gasket or how it threads and seats itself into the housing, providing some way to dissipate heat. Or maybe the contacts are positioned differently. Something to check into. Let us know how you resolve this, good luck.

Socket - Toyota (90075-60028) | Toyota Parts


Socket - Toyota (90075-60083) | Toyota Parts
The 90075-60083 socket does not fit the 2010-2013 harness

The 2010-2013 DRL/Turn utilizes the 1156NA

Essentially I just followed the guide from @Jeffy here: 2014+ Facelift (headlight swap) - Toyota 120 Platforms Forum
__________________
2010 4Runner SR5 Magnetic Gray: Radflo / Icon + Metaltech / Total Chaos / Dirt King / SCS Stealth 6 / BAMF Sliders + Pelfreybilt Bumper / PRINSU / Indel B / 2014+ IS 350 Retrofit
2012 GX460 Premium Black Onyx: Stock af
tristero is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 04:20 PM #58
Jeffy's Avatar
Jeffy Jeffy is offline
Member
 
Join Date: Jan 2015
Location: Bay Area, CA
Posts: 326
Jeffy is on a distinguished road
Jeffy Jeffy is offline
Member
Jeffy's Avatar
 
Join Date: Jan 2015
Location: Bay Area, CA
Posts: 326
Jeffy is on a distinguished road
Quote:
Originally Posted by tristero View Post
Man that sucks. I never saw that on the Lasfit website, and they still haven't mentioned it after several contacts explaining the bulb needed and purpose even before I ordered. They're supposed to be sending new 7443NA in case there was an issue with the ones I received.



The 90075-60083 socket does not fit the 2010-2013 harness

The 2010-2013 DRL/Turn utilizes the 1156NA

Essentially I just followed the guide from @Jeffy here: 2014+ Facelift (headlight swap) - Toyota 120 Platforms Forum
Just use normal LED bulbs (nothing fancy, no canbus stuff) and put a resistor in the rear turn signals.

If your rear bulbs are also LED, you'll need to either put two resistors per side, or one resistor with twice the resistance. But this way the resistors aren't constantly on with the front DRL bulb.
__________________
2011 SR5 Pelfreybilt :: Radflo :: Total Chaos :: Stubbs Sliders :: Prinsu :: RB BL :: 34x10.5 BFG T/A KO2 :: Rockford Fosgate, JL Audio
Jeffy is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 06:01 PM #59
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by tristero View Post
Man that sucks. I never saw that on the Lasfit website, and they still haven't mentioned it after several contacts explaining the bulb needed and purpose even before I ordered. They're supposed to be sending new 7443NA in case there was an issue with the ones I received.



The 90075-60083 socket does not fit the 2010-2013 harness

The 2010-2013 DRL/Turn utilizes the 1156NA

Essentially I just followed the guide from @Jeffy here: 2014+ Facelift (headlight swap) - Toyota 120 Platforms Forum

OK. I think this may be the problem. According to the thread you followed the 90075-60083 socket was used and modified:
“ The reason for this is the socket I used is not for a 4Runner. The 2014+ 4Runners use a 3-prong socket, and the previous models use a 2-prong socket. Rather than try to mess with re-wiring a perfectly good harness, I chose to just get a 2-prong socket and slightly modify it to fit.“

The 2014+ 4Runners use a 3-prong socket because they use a 7443 dual filament bulb. The low wattage filament is On when the stalk is switched to Park or headlights On. The high wattage filament is On when the turn signal switch is On (blinker relay controlled).

I suspect that since the mod is for a 2-wire system it was wired to use the high wattage filament prongs on the socket. I”m guessing that the way it works for you is that the bulb is On bright all the time (“DRL” mode). And when the turn signals blink the bulb output is bright-off-bright etc. If this is the case then you are running this Lasfit bulb constantly and it will get too hot for the socket.


As @Jeffy recommended, try lower power LEDs that can run constantly. If you need to add resistors to prevent hyperflash, use high wattage ones and mount them on a metal surface. They will get quite warm if powered On all the time. Or go back to a standard 7443 incandescent bulb.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 10-25-2019, 07:16 PM #60
BigCountryT4R's Avatar
BigCountryT4R BigCountryT4R is offline
Member
 
Join Date: Apr 2016
Location: Abilene, TX
Posts: 263
BigCountryT4R will become famous soon enough
BigCountryT4R BigCountryT4R is offline
Member
BigCountryT4R's Avatar
 
Join Date: Apr 2016
Location: Abilene, TX
Posts: 263
BigCountryT4R will become famous soon enough
Quote:
Originally Posted by tristero View Post
Not sure why you quoted me. They work fine in 2014+



Anyone else have any suggestions?

Because you posted about Lastfit and I have them as well.
__________________
2019 4Runner Limited in Magnetic Gray Metallic, w/Redwood Interior, and 3rd row. Mods: Lastfit 7440/7443 Led Blinkers | JDM ASTAR LEDs throughout the interior and backup/license plate bulbs | OEM Tundra LED Fog Lights | Morimoto Elite HID 5500k 35w | Xenon Depot Led Pro 9005 w/LED Driver for DRL / XPLORE OFFROAD USA Flag rear windows | Adams Polishes UV Ceramic Paint coating
BigCountryT4R is offline   Reply With QuoteReply With Quote
Reply

Tags
built , led , load , resistors , turn

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: 4th gen OEM TURN SIGNALS w/ DRL lshishido03 For Sale: Non-T4R Items 0 07-23-2013 04:52 PM
Turn signals skoppit General Discussions 1 12-09-2010 11:21 PM
Turn signals OUT!?? HELP danny4runner 3rd gen T4Rs 6 09-04-2009 10:47 AM
turn signals honda4trx Classic T4Rs 4 02-09-2006 07:56 PM
Turn Signals a3fnqpjw Engines / Suspension / Wheels / Tires / Audio / Accessories 2 10-04-2005 12:18 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 02:34 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020