Quote:
Originally Posted by tristero
No way you're installing longer bulbs on mine without pulling the lights, I'm pretty jealous that anyone has enough slack to do that.
So I did what
@ Jeffy
said. Installed rear resistors and rear LED. Here's the outcome:
1. LED turn signals work without hyperflash, but I have to use the Lasfit bulbs in the front
2. the nothing fancy, non-CANBUS bulbs hyperflash when put into the front turns
2. DRL no longer works at all with any bulbs
In the rear, I tapped the yellow on LH and light blue on RH for +, as these are the only wires that read on the meter.
|
Following up: I installed the Morimoto HD resistors. The DRL function didn't work at first but everything is fine now. No idea where the issue was... I checked the wiring and taps several times, then the next day - BOOM - lights work fine.
Regarding the lasfit bulbs, those f*ckers get
HOT
I do not recommend for the 2010 to 2014 application