Rear Bumper with Modular Swingouts NOW AVAILABLE! NEW VIDEO - Page 22 - Toyota 4Runner Forum

Victory 4x4 · 03-11-2020, 09:49 AM

Quote:

Originally Posted by CherokeeTactical

Are there any current discounts for the rear bumper and swing carrier??? I've got the Victory front bumper on mine, looking to get the rear to match!

We currently have a tax season sale going on. 10% off everything!
Coupon Code: TAXSALE

macscac · 04-18-2020, 01:36 AM

Can anyone confirm that w/ the tire swing out on pass side and a jerrycan swing out on the driver side, it will work w/ a c4 ladder installed?

thanks!

SnowYeti · 04-30-2020, 08:53 AM

Any thoughts on making an aluminum version for those of us that are not going to bash it hard, but want the utility. Maybe keeping the factory hitch to save cost and development time?

Be great to knock the weight down as much as your aluminum Blitz bumper did. Realizing it would cost more. Only one aluminum bumper out there as far as I know and researching rear bumpers aluminum comes up regularly.

Victory 4x4 · 04-30-2020, 09:03 AM

Quote:

Originally Posted by SnowYeti

Any thoughts on making an aluminum version for those of us that are not going to bash it hard, but want the utility. Maybe keeping the factory hitch to save cost and development time?

Be great to knock the weight down as much as your aluminum Blitz bumper did. Realizing it would cost more. Only one aluminum bumper out there as far as I know and researching rear bumpers aluminum comes up regularly.

We have discussed this. It may be something we do eventually if we were to offer a no-carrier rear bumper. We really want the strength of steel to support our modular carrier system. Our carriers are some of the strongest out there, but all of the weight and leverage of tires/jerry cans/hi-lifts/etc. bouncing around on the trail would fatigue an aluminum version over time.

macscac · 05-16-2020, 01:19 AM

still trying to confirm how this will play out with a c4 ladder installed.
does anyone know?

also, I will be using 315/70r/17 ko2's. based on the photos above it looks like theres about an inch(?) of gap between the 265's and the jerry cans.
will the 315's even fit?

is there some type of adjustability sideways of the jerry can holder?

thanks

agentcross · 05-17-2020, 09:22 AM

What kind of things do you guys use the fold down table for? Not sure I’d use it too much

sn_85 · 05-17-2020, 09:22 PM

Quote:

Originally Posted by SnowYeti

Any thoughts on making an aluminum version for those of us that are not going to bash it hard, but want the utility. Maybe keeping the factory hitch to save cost and development time?

Be great to knock the weight down as much as your aluminum Blitz bumper did. Realizing it would cost more. Only one aluminum bumper out there as far as I know and researching rear bumpers aluminum comes up regularly.

I think the only two Al2+ bumpers out there are the Heftyfab and Coastal Off-Road DIY kit.

bring_it_on · 07-15-2020, 09:15 AM

Is there a licence plate mount solution available for those who may only want to use one adventure carrier but use it with the dual jerry can carrier instead of the tire carrier or at least retain that flexibility of swapping out the mounts?

Victory 4x4 · 07-15-2020, 10:36 AM

Quote:

Originally Posted by macscac

still trying to confirm how this will play out with a c4 ladder installed.
does anyone know?

also, I will be using 315/70r/17 ko2's. based on the photos above it looks like theres about an inch(?) of gap between the 265's and the jerry cans.
will the 315's even fit?

is there some type of adjustability sideways of the jerry can holder?

thanks

There is now more adjustability in the jerry can holder from left to right. You should be able to mount it with 315's no problem. I'm not sure about a left carrier with the ladder. How far is the outside of the ladder from the tailgate?

Victory 4x4 · 07-15-2020, 10:41 AM

Quote:

Originally Posted by bring_it_on

Is there a licence plate mount solution available for those who may only want to use one adventure carrier but use it with the dual jerry can carrier instead of the tire carrier or at least retain that flexibility of swapping out the mounts?

We do not have a separate license plate mount for that case, but you should be able to mount the outer portion to of the license plate mount to the top CB hole on the carrier.

bring_it_on · 07-16-2020, 09:59 AM

Quote:

Originally Posted by Victory 4x4

We do not have a separate license plate mount for that case, but you should be able to mount the outer portion to of the license plate mount to the top CB hole on the carrier.

Thank you. Do you guys do installations? I just moved to the Chicagoland area and wouldn't mind making the trip later this year to get it installed.

Victory 4x4 · 07-16-2020, 10:05 AM

Quote:

Originally Posted by bring_it_on

Thank you. Do you guys do installations? I just moved to the Chicagoland area and wouldn't mind making the trip later this year to get it installed.

Yes, we do! Give us a call anytime to set it up.
269-459-8447

Off-Camber · 09-06-2020, 01:25 PM

Rear end update. If anyone is looking for a nice place to mount a shovel and or Axe, etc it will fit behind the swing out with quickfists. Just drill a couple of holes and throw some black spray paint on there for prevent rust.

Left side carrier will eventually get 2 x 3gal roto pax and 2x 2gal water pax. Or 2 x 3 gal rotopax and then 1 more 2 gal rotopax and 1 x 2 gal water pax.

bmgreene · 01-19-2021, 05:05 PM

Is there any possibility to relocate the back-up camera somewhere other than the middle of the tire? Alternately, would a 33" tire on a pass side single swing-out obstruct the factory camera location on a 2008 Limited (toward the left end of the rear gate handle area)?

I'm planning to hang a trasharoo or similar bag on my tire, which would obstruct the camera in that location.

Separately, would the light cube openings in this bumper accommodate surface-mount pods as well as the bracket-mounted cubes shown on the v4x4 website?

Victory 4x4 · 01-19-2021, 05:25 PM

Quote:

Originally Posted by bmgreene

Is there any possibility to relocate the back-up camera somewhere other than the middle of the tire? Alternately, would a 33" tire on a pass side single swing-out obstruct the factory camera location on a 2008 Limited (toward the left end of the rear gate handle area)?

I'm planning to hang a trasharoo or similar bag on my tire, which would obstruct the camera in that location.

Separately, would the light cube openings in this bumper accommodate surface-mount pods as well as the bracket-mounted cubes shown on the v4x4 website?

It would be possible to mount the camera mount somewhere else, you may need to drill holes in order to do so. The 4th Gen we test fit on did not have a camera. Based on photos, it looks like a passenger-side swing-out would only block part of the peripheral view of the camera.

The light cutouts are not designed for flush-mounted lights. Any standard single-post mounted 3"x3" cube light will work!

Site Navigation