Quote:
Originally Posted by LakeRunr
This worked on my SR5 but I had to run 3 wires from the sensor harness to the body ECU. I never tested the existing 3 wires at the sensor, but I'm pretty sure they were not connected all the way through to anything.
|
This 100%.
For those with SR5's who don't get any change with the sensor, you are missing a blue, pink and red wire from the Main body MPX ECU to the large junction connector behind the instrument cluster. If you have the blue connector attached to the blank where the sensor goes, the wiring from the sensor to large junction connector is present. You just need to complete the three circuits.
@
LakeRunr
posted a solution in this thread I'm pretty sure.