User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-11-2019, 04:41 PM #76
CavPro's Avatar
CavPro CavPro is offline
Member
 
Join Date: Aug 2018
Location: N California (really, 4 hours N of SF)
Posts: 332
CavPro has a spectacular aura about CavPro has a spectacular aura about CavPro has a spectacular aura about
CavPro CavPro is offline
Member
CavPro's Avatar
 
Join Date: Aug 2018
Location: N California (really, 4 hours N of SF)
Posts: 332
CavPro has a spectacular aura about CavPro has a spectacular aura about CavPro has a spectacular aura about
Quote:
Originally Posted by mynameistory View Post
I have no idea what you mean by that. What import agreement, and why would portside installs affect it?

All i'm saying is with the tariffs and trade deals who knows exactly why they do stuff like install things at the ports (AMPORTS ) instead of at the factory, but as in the past with installing truck beds after the vehicles arrived in the US, AC as a dealer installed upgrade, NUMMI manufactured vehicles, or even moving assembly plants to the US, everything they do in this regard does have a reason and imo it's not because of the existing assembly line and not wanting to change it. I'm sure it's been changed / updated, at least I hope it has been to some degree or another over the last decade.
__________________
1973 Datsun 240z (traded in for ---->) 1981 Toyota 4x4 Deluxe LB (avatar) stolen while sitting with For Sale sign on it / 1987 Chevrolet Suburban 4x4, workhorse - sold / 1984 Buick Grand National - Totaled, rear-ended / 1986 Buick Grand National - Sold then restified, lives in SF now / 1994 Toyota Camry - 240k - Taken to Austin Tx by son, traded in on VW GTI sport / 2001 Ford Excursion 7.3 212k - still pulling Arctic Fox Trailer - This is the shtf vehicle / 2018 Toyota 4runner TRD Pro Cavalry Blue
CavPro is offline   Reply With QuoteReply With Quote
Old 07-11-2019, 06:56 PM #77
cb1111's Avatar
cb1111 cb1111 is offline
Member
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
cb1111 cb1111 is offline
Member
cb1111's Avatar
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
Quote:
Originally Posted by CavPro View Post
All i'm saying is with the tariffs and trade deals who knows exactly why they do stuff like install things at the ports (AMPORTS ) instead of at the factory, but as in the past with installing truck beds after the vehicles arrived in the US, AC as a dealer installed upgrade, NUMMI manufactured vehicles, or even moving assembly plants to the US, everything they do in this regard does have a reason and imo it's not because of the existing assembly line and not wanting to change it. I'm sure it's been changed / updated, at least I hope it has been to some degree or another over the last decade.
Correct. This process of port installed items started some years ago when it was determined that many items "went missing" in transit. Accordingly, manufacturers started shipping some easily pilferable items in a containers like mats and tools. That then expanded to radios and other parts that required installation and now also includes locally sourced items.
__________________
When in trouble - obfuscate
cb1111 is offline   Reply With QuoteReply With Quote
Old 07-11-2019, 08:09 PM #78
Mr.Franko Mr.Franko is offline
Member
 
Join Date: Nov 2017
Location: The Lone Star State
Posts: 48
Mr.Franko is on a distinguished road
Mr.Franko Mr.Franko is offline
Member
 
Join Date: Nov 2017
Location: The Lone Star State
Posts: 48
Mr.Franko is on a distinguished road
Pro IF you want the specialty color, otherwise what's really the point, just modify a Trail/Off-Road.
__________________
2017 PRO (ICON-NFAB-GOBI-SCS-FALKEN-HWMS-WARN-SPOD-RAGO-BD-ARB-NORTHSTAR-BANDI-VIAIR-FACTOR 55)
Mr.Franko is offline   Reply With QuoteReply With Quote
Old 07-11-2019, 08:50 PM #79
mynameistory's Avatar
mynameistory mynameistory is offline
Member
 
Join Date: Jan 2018
Location: Redondo Beach, CA
Posts: 952
mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold
mynameistory mynameistory is offline
Member
mynameistory's Avatar
 
Join Date: Jan 2018
Location: Redondo Beach, CA
Posts: 952
mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold
Quote:
Originally Posted by CavPro View Post
All i'm saying is with the tariffs and trade deals who knows exactly why they do stuff like install things at the ports (AMPORTS ) instead of at the factory, but as in the past with installing truck beds after the vehicles arrived in the US, AC as a dealer installed upgrade, NUMMI manufactured vehicles, or even moving assembly plants to the US, everything they do in this regard does have a reason and imo it's not because of the existing assembly line and not wanting to change it. I'm sure it's been changed / updated, at least I hope it has been to some degree or another over the last decade.
The truck bed installation port-side was an exploitation of the chicken tax. Since light pickup truck imports require a 25% import tariff (chicken tax), manufacturers thought up all kinds of crazy ways to get around it.

Toyota shipped pickups as cab-on-frame and then attached the bed after arrival, Subaru installed cheap jump seats in the bed of the Brat and called it a "passenger vehicle"; even Ford made Transit work vans in Turkey with cheap seats and interior installed, and then they removed and shredded everything locally in order to avoid a tariff that Ford themselves had their part in requesting from the government in the fifties.

All of these loopholes are closed now, and all light pickup trucks sold in the US are made in North America. Trying to import a truck with a 25% added cost is suicide to an automaker.

Individual components of a vehicle are not taxed differently (for example, Limited trucks with XREAS shocks are taxed the same as SR5 trucks with standard suspension).

The Pro trucks are low-volume products that are essentially appearance packages on Off-Road Premium 4Runners. There is a huge cost associated with disrupting a production line, especially for one so long in the tooth and established as the 5th gen (which is almost 100% automated). As strange as it sounds, it is cheaper to have the Pro-parts installed here (shocks, trim, wheels etc.) by a small team than to completely disrupt the product mix at the factory.

This is also the reason I believe why the Pro colors are only available for one year each on the 4Runner, while the other trucks made here in NA have the colors available the year after (inferno orange, quicksand, cement, cavalry and voodoo blue, etc.) Don't forget that in addition to painting the body, there are other components (bumper, mirror caps, doors, etc.) that must be manufactured and matched exactly with the truck. The NA lines have more capacity to accommodate additional product mix. The Tahara plant is likely at max capacity with the sudden skyrocketing of popularity for this old dinosaur of an SUV.

From another post where I detailed this further:

Quote:
Originally Posted by JeremyB View Post
I'm just talking changing or adding paint colors. It's a simple change that isn't going to hose up Toyota's carefully cultivated process.

As you've said, this is basically Toyota's most mature vehicle. Swapping out a paint color isn't going to wreck their profits on it.
That might be because I'm not impressing product mix on you enough. In your head, you might be picturing cars as a single piece on a conveyor belt going through a single paint booth. Just change the color of paint in the gun, right? But that's not how automated assembly lines work.

True, bodies-in-white travel through the paint booth(s) in that fashion. But what about trim pieces? Bumpers? Grill assemblies? Door handles? Sideview mirror caps? Spoiler? Those are integrated later as the car moves through the assembly line. They are delivered just in time to be installed (JIT manufacturing), not waiting in piles of inventory on the floor. Those allocations must be made carefully to match the order of cars coming down the line, and disaster waits when they are not. Let's all take a second to laugh at FCA's handling of product mix on the new JL Wrangler.



Could you imagine a red 4Runner arriving at the dealer with blue bumpers? No, because that would be ridiculous and the undoing of Toyota's fastidious image of building things correctly. Jeep gets a pass because, well, Jeep guys are willing to put up with a lot of bullshít to be seen as "Jeep guys" including watching their trackbars shearing off at the frame.

I'll bet that the one-off colors for the 4Runner Pro had to be hard fought with the bean-counters over in Tahara. I am guessing that there is more flexibility in San Antonio because there is less automation, and more people on site to accommodate line errors.
__________________
-Tory

- 2016 4Runner - WeatherTech Floor Liners - Key Fob Window Roll-down Mod - 35 PSI Tire Pressure - Gum Holder Delete - iOttie Phone Holder - RainX Windshield Mod - Stock Windshield Wipers (for now) - Radio Stations are 105.9, 106.7, 95.5, and 93.1 - Chrome Exhaust Tip - Really want a Gobi Ladder but I guess I'll just stand on the Tire because it's free and does the same thing - Some Old Coleman Ice Chest - A Gas Can I Found -
mynameistory is offline   Reply With QuoteReply With Quote
Old 07-11-2019, 09:00 PM #80
Jetboy's Avatar
Jetboy Jetboy is offline
Senior Member
 
Join Date: Dec 2014
Location: Utah
Posts: 4,976
Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute
Jetboy Jetboy is offline
Senior Member
Jetboy's Avatar
 
Join Date: Dec 2014
Location: Utah
Posts: 4,976
Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute
FWIW Toyota does not build vehicles in production series. On the same factory line a red prado will follow a white 4runner then a blue gx460. Adding a paint color is not really a complicated task on a Toyota production line like it might be on many others. However, it still requires paint and every color has a cost. There's no reason they couldn't sell in every gx/prado/4runner color though. Paint is s minor detail. The trd pro doesn't share a frame with a kdss model (kdss has a different frame, pro is shared with all other 4x4 models ).

Last edited by Jetboy; 07-11-2019 at 09:06 PM.
Jetboy is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 08:49 AM #81
cb1111's Avatar
cb1111 cb1111 is offline
Member
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
cb1111 cb1111 is offline
Member
cb1111's Avatar
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
Quote:
Originally Posted by mynameistory View Post



Could you imagine a red 4Runner arriving at the dealer with blue bumpers? No, because that would be ridiculous and the undoing of Toyota's fastidious image of building things correctly. Jeep gets a pass because, well, Jeep guys are willing to put up with a lot of bullshít to be seen as "Jeep guys" including watching their trackbars shearing off at the frame.

I'll bet that the one-off colors for the 4Runner Pro had to be hard fought with the bean-counters over in Tahara. I am guessing that there is more flexibility in San Antonio because there is less automation, and more people on site to accommodate line errors.
No, you really don't get it, do you?

The photo of the Jeep with the multi colored panels is merely Jeep's attempt to imitate Volkwagen's Golf Harlequin edition

Back in the 90's, I bought a GMC Yukon. On one side it said "1500", on the other side it said "Yukon" - Chevy Tahoes were labeled with the 1500 on the side.
__________________
When in trouble - obfuscate
cb1111 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 02:17 PM #82
mynameistory's Avatar
mynameistory mynameistory is offline
Member
 
Join Date: Jan 2018
Location: Redondo Beach, CA
Posts: 952
mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold
mynameistory mynameistory is offline
Member
mynameistory's Avatar
 
Join Date: Jan 2018
Location: Redondo Beach, CA
Posts: 952
mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold mynameistory is a splendid one to behold
Quote:
Originally Posted by Jetboy View Post
FWIW Toyota does not build vehicles in production series. On the same factory line a red prado will follow a white 4runner then a blue gx460. Adding a paint color is not really a complicated task on a Toyota production line like it might be on many others. However, it still requires paint and every color has a cost. There's no reason they couldn't sell in every gx/prado/4runner color though. Paint is s minor detail. The trd pro doesn't share a frame with a kdss model (kdss has a different frame, pro is shared with all other 4x4 models ).
Yes this is actually common for a lot of production lines. I visited Stuttgart a few years ago and did the Porsche factory tour where 718 Caymans and GT3RS 911s rolled off the same conveyor. Porsche has a fantastically larger catalogue of options and packages in their vehicle product mix, but they also can easily alleviate these added complications by charging more. Seriously, go look at prices for custom paint or interior packages- the Weissach package famously costs $18,000 on the GT3RS to replace some body panels and components with carbon fiber- to be just 40 pounds lighter.

Toyota does not have, nor would it want to have, this kind of demand for variation in its product lines. Porsche sport car numbers pale in comparison to the juggernaut of plain, boring Toyota passenger car sales. But even in low volume, specialty vehicles; Toyota famously has very little product mix. The Land Cruiser, with about 3000 examples sold in the states every year, still only has ONE option available to customers (TV screens for rear passengers). Toyota pioneered the very bones of lean manufacturing, and enjoy the largest profit margins of any major automaker by far. A large part of this profit margin comes from tightly controlling their product mix to keep production lines moving efficiently. The Pro 4Runner having some one-off colors is an example of Toyota "letting their hair down" and really getting WILD with product mix.

When you say "adding a different paint isn't that difficult", you're not really grasping the scope of how small changes induce a ripple effect in the entire production line. Especially a line as established as the Tahara 4x4 plant, and the 4Runner being as ancient in its life cycle as it is.

If Toyota could easily integrate things like Fox shocks into production for the Pro at the Tahara plant, don't you think they would have? After all, why completely take the factory suspension apart at the docks to swap in the Fox suspension? Or ship the truck with a bare roof, only to add that hideous new roof rack when it rolls off the boat? Luckily they've been able to offset these costs by charging people ridiculous amounts for what is essentially an Off Road premium 4Runner with some black badges.

Remember the precursor to the Pro Tacoma, the Baja edition? A TRD specialty team did the same thing and swapped in special Bilstein shocks and slapped some vinyl graphics on a plain old Tacoma Off Road. It too was during the last few years of the second generation truck heading into the sunset. I suspect that the new lines for the 3rd Gen Tacoma have the Pros integrated directly into the line, because they had planning and allocation for it from the start.

Or I could be full of shit. I come from a manufacturing background but these are just my assumptions. I can't say for sure.
__________________
-Tory

- 2016 4Runner - WeatherTech Floor Liners - Key Fob Window Roll-down Mod - 35 PSI Tire Pressure - Gum Holder Delete - iOttie Phone Holder - RainX Windshield Mod - Stock Windshield Wipers (for now) - Radio Stations are 105.9, 106.7, 95.5, and 93.1 - Chrome Exhaust Tip - Really want a Gobi Ladder but I guess I'll just stand on the Tire because it's free and does the same thing - Some Old Coleman Ice Chest - A Gas Can I Found -
mynameistory is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 02:36 PM #83
cb1111's Avatar
cb1111 cb1111 is offline
Member
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
cb1111 cb1111 is offline
Member
cb1111's Avatar
 
Join Date: Jun 2019
Location: Washington DC
Posts: 932
cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold cb1111 is a splendid one to behold
Quote:
Originally Posted by mynameistory View Post
Yes this is actually common for a lot of production lines. I visited Stuttgart a few years ago and did the Porsche factory tour where 718 Caymans and GT3RS 911s rolled off the same conveyor. Porsche has a fantastically larger catalogue of options and packages in their vehicle product mix, but they also can easily alleviate these added complications by charging more. Seriously, go look at prices for custom paint or interior packages- the Weissach package famously costs $18,000 on the GT3RS to replace some body panels and components with carbon fiber- to be just 40 pounds lighter.

Toyota does not have, nor would it want to have, this kind of demand for variation in its product lines. Porsche sport car numbers pale in comparison to the juggernaut of plain, boring Toyota passenger car sales. But even in low volume, specialty vehicles; Toyota famously has very little product mix. The Land Cruiser, with about 3000 examples sold in the states every year, still only has ONE option available to customers (TV screens for rear passengers). Toyota pioneered the very bones of lean manufacturing, and enjoy the largest profit margins of any major automaker by far. A large part of this profit margin comes from tightly controlling their product mix to keep production lines moving efficiently. The Pro 4Runner having some one-off colors is an example of Toyota "letting their hair down" and really getting WILD with product mix.

When you say "adding a different paint isn't that difficult", you're not really grasping the scope of how small changes induce a ripple effect in the entire production line. Especially a line as established as the Tahara 4x4 plant, and the 4Runner being as ancient in its life cycle as it is.

If Toyota could easily integrate things like Fox shocks into production for the Pro at the Tahara plant, don't you think they would have? After all, why completely take the factory suspension apart at the docks to swap in the Fox suspension? Or ship the truck with a bare roof, only to add that hideous new roof rack when it rolls off the boat? Luckily they've been able to offset these costs by charging people ridiculous amounts for what is essentially an Off Road premium 4Runner with some black badges.

Remember the precursor to the Pro Tacoma, the Baja edition? A TRD specialty team did the same thing and swapped in special Bilstein shocks and slapped some vinyl graphics on a plain old Tacoma Off Road. It too was during the last few years of the second generation truck heading into the sunset. I suspect that the new lines for the 3rd Gen Tacoma have the Pros integrated directly into the line, because they had planning and allocation for it from the start.

Or I could be full of shit. I come from a manufacturing background but these are just my assumptions. I can't say for sure.
Well, you may be full of shit, but you're most likely correct here.

One of the reasons that the Japanese auto industry could sell cars cheaper initially than the US was that there were few options. You might have a couple of trim levels but very few options. It has only been in the last 20 years or so that individual options were added and even now there are many bundled options to reduce costs.
__________________
When in trouble - obfuscate
cb1111 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 03:23 PM #84
Ripper238's Avatar
Ripper238 Ripper238 is offline
Member
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
Ripper238 Ripper238 is offline
Member
Ripper238's Avatar
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
I was deciding on adding KDSS and after a lot of searching i found little to no issues reported. Mostly speculation and assumptions that because dealers just replace the whole thing its an expensive add on that will break. When if fact this tells me dealers have so little issues with it they just replace the whole thing to avoid the extra work. Even the one tread i found the dealer tried to incorporate the cost of a tool they needed to fix the one KDSS failure i found. This also tells me its so rare they don't even have the right tools at the dealer.

So i just picked up my 2019 R4 with KDSS. Its Well worth it if you not going to super mod it.

At slower speeds (like 12mph) KDSS will likely show off more of what it can do articulation wise. At Higher speeds like 30+ it will show its better handling capabilities.

KDSS is a passive system, constantly active. When one wheel goes up enough, and the other goes down enough as determined by the hydraulic sensors, the system simply "disengages/releases pressure" (allows fluid to flow freely) to the sway bar. When on flat more consistent roads at higher speeds it will engage/add pressure (restrict flow) to the sway bar helping stabilize it in the turn. Its simple and quite effective.

This is a good video of how and when it works: https://www.youtube.com/watch?v=NLF6...e_gdata_player


Quote:
Originally Posted by Tejas View Post
Height limitations in regards to lifts and long term
maintenance/failure. Read up on the system long term and its failures. Before the bandwagon jumps in and starts talking crap, yes I have owned a vehicle with it in a 200 series, we now have a new 200 (LX570) with AHC which we prefer.

Is it better on the road than a model without KDSS, well duh, but it isn't mind blowing like some here will have you believe. Your money best spent would undoubtedly be a SR5 with a quality lift and an aftermarket rear locker.
If you have links to failures i would love to see them.

And i agree, its not mind blowing. But its certainly much better to have it than not if you are not modding your 4R. Its also very noticeable compared side by side.


Quote:
Originally Posted by KCZ** View Post
I'm also looking for an ORP with KDSS and they're nowhere to be found in northern New England. Do dealers actually stock any 4R's with KDSS, or do they have to be special-ordered, and what's the usual wait time on delivery?
I live in the NE and found 2 (bought one of them) so they are around, but will be hard to find soon since the 2020's will be out and 2019's wont be made anymore.

Last edited by Ripper238; 07-12-2019 at 03:46 PM.
Ripper238 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 03:45 PM #85
jhguth jhguth is offline
Senior Member
 
Join Date: Dec 2015
Posts: 1,305
jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold
jhguth jhguth is offline
Senior Member
 
Join Date: Dec 2015
Posts: 1,305
jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold
Quote:
Originally Posted by Ripper238 View Post

KDSS is a passive system, constantly active. When one wheel goes up enough, and the other goes down enough as determined by the hydraulic sensors, the system simply "disengages/releases pressure" (allows fluid to flow freely) to the sway bar. When on flat more consistent roads at higher speeds it will engage/add pressure (restrict flow) to the sway bar helping stabilize it in the turn. Its simple and quite effective.
that's not how KDSS works
jhguth is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 03:52 PM #86
Ripper238's Avatar
Ripper238 Ripper238 is offline
Member
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
Ripper238 Ripper238 is offline
Member
Ripper238's Avatar
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
Quote:
Originally Posted by jhguth View Post
that's not how KDSS works
Watch the video. That's exactly how it works. Though i may not have worded it as well as what a video can show.


https://www.youtube.com/watch?v=NLF6...e_gdata_player
Ripper238 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 04:21 PM #87
jhguth jhguth is offline
Senior Member
 
Join Date: Dec 2015
Posts: 1,305
jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold
jhguth jhguth is offline
Senior Member
 
Join Date: Dec 2015
Posts: 1,305
jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold jhguth is a splendid one to behold
Quote:
Originally Posted by Ripper238 View Post
Watch the video. That's exactly how it works. Though i may not have worded it as well as what a video can show.


https://www.youtube.com/watch?v=NLF6...e_gdata_player
i don't think it's a wording problem, you seem to have a misunderstanding of the concept

"KDSS is a passive system, constantly active." - true

"When one wheel goes up enough, and the other goes down enough as determined by the hydraulic sensors, the system simply "disengages/releases pressure" (allows fluid to flow freely) to the sway bar." - No, its a closed system with accumulators that can be closed off, so fluid is always flowing as sway bars are moving just when the accumulator is open it's not as direct because it can compress into the accumulator. when the accumulator is closed off it's a very direct transfer of forces because hydraulic fluid is essentially incompressible.

"When on flat more consistent roads at higher speeds it will engage/add pressure (restrict flow) to the sway bar helping stabilize it in the turn. Its simple and quite effective." - it's passive, there is no pump i.e. there is no adding pressure

this is the easiest diagram

Last edited by jhguth; 07-12-2019 at 04:35 PM.
jhguth is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 04:40 PM #88
Ripper238's Avatar
Ripper238 Ripper238 is offline
Member
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
Ripper238 Ripper238 is offline
Member
Ripper238's Avatar
 
Join Date: Jun 2019
Location: CT/NY
Posts: 974
Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice Ripper238 is just really nice
Quote:
Originally Posted by jhguth View Post
i don't think it's a wording problem, you seem to have a misunderstanding of the concept

"KDSS is a passive system, constantly active." - true

"When one wheel goes up enough, and the other goes down enough as determined by the hydraulic sensors, the system simply "disengages/releases pressure" (allows fluid to flow freely) to the sway bar." - No, its a closed system with an accumulator that can be closed off, so fluid is always flowing as sway bars are moving just when the accumulator is open it's not as direct because it can compress into the accumulator. when the accumulator is closed off it's a very direct transfer of forces because hydraulic fluid is essentially incompressible.

"When on flat more consistent roads at higher speeds it will engage/add pressure (restrict flow) to the sway bar helping stabilize it in the turn. Its simple and quite effective." - it's passive, there is no pump i.e. there is no adding pressure
I don't really see a difference. I never said it was not a closed system or that there is a pump doing this?

But clearly my explanation has no relevance to the way it truly is working in technical terms.

Thank you for explaining in detailed terms. This help a lot.
Ripper238 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 05:34 PM #89
Donovan1 Donovan1 is offline
Member
 
Join Date: May 2009
Location: Modesto ca
Age: 51
Posts: 272
Donovan1 is on a distinguished road
Donovan1 Donovan1 is offline
Member
 
Join Date: May 2009
Location: Modesto ca
Age: 51
Posts: 272
Donovan1 is on a distinguished road
Quote:
Originally Posted by Ripper238 View Post
I was deciding on adding KDSS and after a lot of searching i found little to no issues reported. Mostly speculation and assumptions that because dealers just replace the whole thing its an expensive add on that will break. When if fact this tells me dealers have so little issues with it they just replace the whole thing to avoid the extra work. Even the one tread i found the dealer tried to incorporate the cost of a tool they needed to fix the one KDSS failure i found. This also tells me its so rare they don't even have the right tools at the dealer.

So i just picked up my 2019 R4 with KDSS. Its Well worth it if you not going to super mod it.

At slower speeds (like 12mph) KDSS will likely show off more of what it can do articulation wise. At Higher speeds like 30+ it will show its better handling capabilities.

KDSS is a passive system, constantly active. When one wheel goes up enough, and the other goes down enough as determined by the hydraulic sensors, the system simply "disengages/releases pressure" (allows fluid to flow freely) to the sway bar. When on flat more consistent roads at higher speeds it will engage/add pressure (restrict flow) to the sway bar helping stabilize it in the turn. Its simple and quite effective.

This is a good video of how and when it works: https://www.youtube.com/watch?v=NLF6...e_gdata_player




If you have links to failures i would love to see them.

And i agree, its not mind blowing. But its certainly much better to have it than not if you are not modding your 4R. Its also very noticeable compared side by side.




I live in the NE and found 2 (bought one of them) so they are around, but will be hard to find soon since the 2020's will be out and 2019's wont be made anymore.
This video is a little easier to understand and shows the actual parts.
https://www.youtube.com/watch?v=deH4HNqiyMg
__________________
1994 FD RX7 R2: Race car.
2010 FJ Cruiser: rock crusher.
2016 TEP 4Runner: Mom/family camping mobile.
Donovan1 is offline   Reply With QuoteReply With Quote
Old 07-12-2019, 07:08 PM #90
Jetboy's Avatar
Jetboy Jetboy is offline
Senior Member
 
Join Date: Dec 2014
Location: Utah
Posts: 4,976
Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute
Jetboy Jetboy is offline
Senior Member
Jetboy's Avatar
 
Join Date: Dec 2014
Location: Utah
Posts: 4,976
Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute Jetboy has a reputation beyond repute
Quote:
Originally Posted by mynameistory View Post
Yes this is actually common for a lot of production lines. I visited Stuttgart a few years ago and did the Porsche factory tour where 718 Caymans and GT3RS 911s rolled off the same conveyor. Porsche has a fantastically larger catalogue of options and packages in their vehicle product mix, but they also can easily alleviate these added complications by charging more. Seriously, go look at prices for custom paint or interior packages- the Weissach package famously costs $18,000 on the GT3RS to replace some body panels and components with carbon fiber- to be just 40 pounds lighter.

Toyota does not have, nor would it want to have, this kind of demand for variation in its product lines. Porsche sport car numbers pale in comparison to the juggernaut of plain, boring Toyota passenger car sales. But even in low volume, specialty vehicles; Toyota famously has very little product mix. The Land Cruiser, with about 3000 examples sold in the states every year, still only has ONE option available to customers (TV screens for rear passengers). Toyota pioneered the very bones of lean manufacturing, and enjoy the largest profit margins of any major automaker by far. A large part of this profit margin comes from tightly controlling their product mix to keep production lines moving efficiently. The Pro 4Runner having some one-off colors is an example of Toyota "letting their hair down" and really getting WILD with product mix.

When you say "adding a different paint isn't that difficult", you're not really grasping the scope of how small changes induce a ripple effect in the entire production line. Especially a line as established as the Tahara 4x4 plant, and the 4Runner being as ancient in its life cycle as it is.

If Toyota could easily integrate things like Fox shocks into production for the Pro at the Tahara plant, don't you think they would have? After all, why completely take the factory suspension apart at the docks to swap in the Fox suspension? Or ship the truck with a bare roof, only to add that hideous new roof rack when it rolls off the boat? Luckily they've been able to offset these costs by charging people ridiculous amounts for what is essentially an Off Road premium 4Runner with some black badges.

Remember the precursor to the Pro Tacoma, the Baja edition? A TRD specialty team did the same thing and swapped in special Bilstein shocks and slapped some vinyl graphics on a plain old Tacoma Off Road. It too was during the last few years of the second generation truck heading into the sunset. I suspect that the new lines for the 3rd Gen Tacoma have the Pros integrated directly into the line, because they had planning and allocation for it from the start.

Or I could be full of shit. I come from a manufacturing background but these are just my assumptions. I can't say for sure.
A Toyota assembly line is quite a bit more advanced than anything in Volkswagen auto group's. Toyota assembly line can change stamping dies between different models in about 1 minute. The second fastest factory outside of Toyotas is a Volkswagen factory in Germany that can do it in about 8 hours. My brother-in-law I worked on the consulting team that was hired to reduce the time from 3 minutes to 1 minute.

Toyota extremely dedicated to efficient production and minimal stock. So they build effectively to order and not in production runs of similar vehicles. I do think the easily could integrate them at the factory. I haven't been to tahara, but I have been to a couple facilities in Japan and the Texas plant. The 150 built in any order in the same production line has about 6 different frames. There are at least a dozen suspension configurations already on that line and probably 15 paint colors. My guess is trd pro suspension has a tariff issue or something of the sort keeping it off the factory floor. It's very basic compared to kdss vs xreas vs air/magnetic versions that are all already on the same line.So it doesn't make a lot of sense to do later unless there's something non-production going on. Swapping coilovers at the port is super inefficient and out of character.


They change paint colors every year. Unless they're already maxed on the amount of colors the tooling can run, it should be pretty easy.

Last edited by Jetboy; 07-12-2019 at 07:32 PM.
Jetboy is offline   Reply With QuoteReply With Quote
Reply

Tags
light , main , pro , suspension , understanding

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
5th Gen. KDSS vs. Non-KDSS handling performance & sway bar diameter differences. CS223 5th gen T4Rs 60 12-08-2021 06:48 PM
RCI Skid Plates KDSS vs Non-KDSS - What's the difference? jthoms1 5th gen T4Rs 13 09-09-2018 10:24 AM
Are the alignment specs the same for KDSS and non-KDSS models? transistor 5th gen T4Rs 4 05-18-2018 07:28 PM
New 4R Purchase: KDSS vs Non-KDSS with Modified Suspension and Added Weight? yellowdog 5th gen T4Rs 5 12-13-2017 01:32 PM
Trading my '14 KDSS for a '14 non-KDSS: Opinions? Throwback 5th gen T4Rs 44 04-06-2017 11:30 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 04:32 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020