User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-12-2019, 02:57 PM #1
gibburnz's Avatar
gibburnz gibburnz is offline
Member
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
gibburnz gibburnz is offline
Member
gibburnz's Avatar
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
Side Mirrors (14+)

Hey guys--

I have 14+ aftermarket side mirrors on my 2011 TE. They are powered for mirror control, but they don't have the signals built into them.

Then, I found on Car Trim Home that they're making sequential replacement lights for those with the signals built into the mirrors. I dig the look and would like to pick them up, but my assumption is that I'd need the harness that runs through the door panel into the signal controls.

Any suggestions on how to achieve that or what harness I need to be looking for?
__________________
2011 Trail Edition. Black. '17 Icon Rebounds w/285 KO2's. Rago molle panels. C4 Fabrication lo pro with 25" LED and Smittybilt X20 winch. Rago rock sliders. TRD front skid. Spidertrax spacers. Gobi ladder. Yakima SkyRise RTT. ARB Safari snorkel. 14+ tails. Blacked out projector/retro-fit head lights. Baja Designs pro fogs. Dobinsons 2.5" lift w/ ICON delta joint UCA's.
gibburnz is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 03:10 PM #2
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
Quote:
Originally Posted by gibburnz View Post
Hey guys--

I have 14+ aftermarket side mirrors on my 2011 TE. They are powered for mirror control, but they don't have the signals built into them.

Then, I found on Car Trim Home that they're making sequential replacement lights for those with the signals built into the mirrors. I dig the look and would like to pick them up, but my assumption is that I'd need the harness that runs through the door panel into the signal controls.

Any suggestions on how to achieve that or what harness I need to be looking for?

We've all been patiently waiting on the harness to be released from @Old Red . You can read up where we are currently on this issue in the following threads.

Side mirrors with turn signals

TRD Pro Side Mirror Swap/Upgrade
r1verf3nix is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 03:21 PM #3
gibburnz's Avatar
gibburnz gibburnz is offline
Member
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
gibburnz gibburnz is offline
Member
gibburnz's Avatar
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
Damn dude, what a coincidence and shame on me for not searching the forum beforehand. Thanks - I'll subscribe to the other thread!
__________________
2011 Trail Edition. Black. '17 Icon Rebounds w/285 KO2's. Rago molle panels. C4 Fabrication lo pro with 25" LED and Smittybilt X20 winch. Rago rock sliders. TRD front skid. Spidertrax spacers. Gobi ladder. Yakima SkyRise RTT. ARB Safari snorkel. 14+ tails. Blacked out projector/retro-fit head lights. Baja Designs pro fogs. Dobinsons 2.5" lift w/ ICON delta joint UCA's.
gibburnz is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 03:21 PM #4
97BlackAckCL's Avatar
97BlackAckCL 97BlackAckCL is offline
Senior Member
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
97BlackAckCL 97BlackAckCL is offline
Senior Member
97BlackAckCL's Avatar
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
You also could just tap the turn signals

YouTube
__________________
2017 Nautical Blue SR5 Premium - Black Emblem Overlays, AFE TB Spacer, AFE Momentum GT Intake, URD MAF Calibrator, Borla Touring Cat-Back Exhaust, Morimoto HID Headlights, Auxbeam LED Highs, Morimoto Black XB LED Fogs, Fyre Flys LED Interior, Lasfit Amber LED Turn Signals, Smoked Amber LED Raptor Lights, Odyssey 34 Battery, 32" LED Bar with Rago Hidden Brackets, Rago Molle Panels, CaliRaised Low-Pro Ditch Brackets w/ Side Shooter LED Pods, Anti-Dark Underhood LED kit, sPod w/ PowerTray Mount, Raceline Matte Bronze Wheels w/ Cooper Discoverer RTX, N-Fab Side Steps, Satin Black Roof Rails, MB Quart Speakers in all 6 door locations, JBL 3.5" in dash, JL 8w3v3 in JBL Enclosure, Husky Weather Beaters, CanvasBack Liners, ScanGauge
97BlackAckCL is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 03:46 PM #5
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
Quote:
Originally Posted by 97BlackAckCL View Post
You also could just tap the turn signals

YouTube

And I don't disagree but with Oldred's harness you get the connector that cannot be purchased that matches the OEM TRD PRO mirror 5-pin. Then he has done all the research as to where the (4)four wires land to serve the walk up puddle lights and turn signals within the door.

If you know where to land the puddle lamps power wire, I could probably come up with a writeup myself.
r1verf3nix is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 05:32 PM #6
Phil Frames Phil Frames is offline
Member
 
Join Date: Mar 2018
Location: Maine
Posts: 30
Phil Frames is on a distinguished road
Phil Frames Phil Frames is offline
Member
 
Join Date: Mar 2018
Location: Maine
Posts: 30
Phil Frames is on a distinguished road
Quote:
Originally Posted by r1verf3nix View Post
And I don't disagree but with Oldred's harness you get the connector that cannot be purchased that matches the OEM TRD PRO mirror 5-pin. Then he has done all the research as to where the (4)four wires land to serve the walk up puddle lights and turn signals within the door.

If you know where to land the puddle lamps power wire, I could probably come up with a writeup myself.
You can find power and ground locations for puddle lamps here: http://toyotaparts.sparkstoyota.com/...17-4runner.pdf
Phil Frames is offline   Reply With QuoteReply With Quote
Old 08-12-2019, 06:09 PM #7
Old Red's Avatar
Old Red Old Red is offline
Member
 
Join Date: Dec 2016
Location: Washington
Posts: 323
Old Red is a jewel in the rough Old Red is a jewel in the rough Old Red is a jewel in the rough
Old Red Old Red is offline
Member
Old Red's Avatar
 
Join Date: Dec 2016
Location: Washington
Posts: 323
Old Red is a jewel in the rough Old Red is a jewel in the rough Old Red is a jewel in the rough
Quote:
Originally Posted by 97BlackAckCL View Post
You also could just tap the turn signals

YouTube
Quote:
Originally Posted by Phil Frames View Post
You can find power and ground locations for puddle lamps here: http://toyotaparts.sparkstoyota.com/...17-4runner.pdf
Quote:
Originally Posted by r1verf3nix View Post
And I don't disagree but with Oldred's harness you get the connector that cannot be purchased that matches the OEM TRD PRO mirror 5-pin. Then he has done all the research as to where the (4)four wires land to serve the walk up puddle lights and turn signals within the door.

If you know where to land the puddle lamps power wire, I could probably come up with a writeup myself.

Yes, if you are looking for the grounding points, etc. the OEM wiring diagrams will give it to you. The only reason to go with the harness I am making is if you want a plug and play solution without having to mess with the factory harness. So it can be DIY, or you can go with a harness set when they are released after Labor Day. Either way will get you the desired result.
__________________
1994 "Old Red" Toyota Pickup Garnett Pearl Red 4x4- STOCK FOREVER

2016 MGM 4Runner Base SR5 4x4-
Factory Nav & Heated Seats Conversion, Limited Interior Illumination, TRD Crawl Control/MTS Conversion, Alea Leather; Creator of the 2015+ Accessory Meter Display Mod; Turn Signal and Puddle Light Mirror retrofit; More mods coming...
Old Red is offline   Reply With QuoteReply With Quote
Old 08-13-2019, 12:26 PM #8
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
Quote:
Originally Posted by 97BlackAckCL View Post
You also could just tap the turn signals

YouTube
Quote:
Originally Posted by Phil Frames View Post
You can find power and ground locations for puddle lamps here: http://toyotaparts.sparkstoyota.com/...17-4runner.pdf
Quote:
Originally Posted by Old Red View Post
Yes, if you are looking for the grounding points, etc. the OEM wiring diagrams will give it to you. The only reason to go with the harness I am making is if you want a plug and play solution without having to mess with the factory harness. So it can be DIY, or you can go with a harness set when they are released after Labor Day. Either way will get you the desired result.
So I went ahead and worked through the wiring diagrams to understand the connections as provided above. What follows is a quick and dirty connection to provide the rough signal wires and a not so clean installation. Personally I can continue to wait a few more weeks to see what @Old Red's research comes up with as running all these wires all over the dash instead of within the door doesn't sound as appealing.
  1. Puddle Lamps:
    Pin #7 and #8 of the 11-pin Premium mirror to be connected to FS1 pins #13 and #15 to provide constant +12V (FS1 pin #13) and a switched ground (FS1 pin #15) for the entry only lights.

    Wiring Diagram:


    FS1 Location:


    FS1 Connector:


  2. Turn Signal:
    Pin #10 of the 11-pin Premium mirror to be connected to F11 pins #2 and #8 (respectively) to provide Driver Side Turn Signal (F11 pin #8) and Passenger Side Turn Signal (F11 pin #2).

    Pin #11 of the 11-pin Premium mirror to be connect to the door grounding point.

    Wiring Diagram:


    F11 Location:


    F11 Connector:


Last edited by r1verf3nix; 08-13-2019 at 12:52 PM.
r1verf3nix is offline   Reply With QuoteReply With Quote
Old 08-13-2019, 01:12 PM #9
97BlackAckCL's Avatar
97BlackAckCL 97BlackAckCL is offline
Senior Member
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
97BlackAckCL 97BlackAckCL is offline
Senior Member
97BlackAckCL's Avatar
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
Just to clarify, I'm a big fan of Old Red and all the things that he makes and researches for us 4Runner owners. The only reason I suggested tapping the turn signals was because OP was asking if he needed a whole different harness when he's already switched to the newer model mirrors. Just wanted to clarify that, I'm in no way trying to take away from what Tanner is doing, he's the man
__________________
2017 Nautical Blue SR5 Premium - Black Emblem Overlays, AFE TB Spacer, AFE Momentum GT Intake, URD MAF Calibrator, Borla Touring Cat-Back Exhaust, Morimoto HID Headlights, Auxbeam LED Highs, Morimoto Black XB LED Fogs, Fyre Flys LED Interior, Lasfit Amber LED Turn Signals, Smoked Amber LED Raptor Lights, Odyssey 34 Battery, 32" LED Bar with Rago Hidden Brackets, Rago Molle Panels, CaliRaised Low-Pro Ditch Brackets w/ Side Shooter LED Pods, Anti-Dark Underhood LED kit, sPod w/ PowerTray Mount, Raceline Matte Bronze Wheels w/ Cooper Discoverer RTX, N-Fab Side Steps, Satin Black Roof Rails, MB Quart Speakers in all 6 door locations, JBL 3.5" in dash, JL 8w3v3 in JBL Enclosure, Husky Weather Beaters, CanvasBack Liners, ScanGauge
97BlackAckCL is offline   Reply With QuoteReply With Quote
Old 08-13-2019, 01:35 PM #10
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
Quote:
Originally Posted by 97BlackAckCL View Post
Just to clarify, I'm a big fan of Old Red and all the things that he makes and researches for us 4Runner owners. The only reason I suggested tapping the turn signals was because OP was asking if he needed a whole different harness when he's already switched to the newer model mirrors. Just wanted to clarify that, I'm in no way trying to take away from what Tanner is doing, he's the man
I know I didn't take it as you were, and agreed he is definitely the man.
r1verf3nix is offline   Reply With QuoteReply With Quote
Old 08-15-2019, 11:37 AM #11
gibburnz's Avatar
gibburnz gibburnz is offline
Member
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
gibburnz gibburnz is offline
Member
gibburnz's Avatar
 
Join Date: Oct 2016
Location: Philadelphia
Posts: 258
Real Name: Ryan
gibburnz will become famous soon enough gibburnz will become famous soon enough
I'll patiently wait until after Labor Day then!!
__________________
2011 Trail Edition. Black. '17 Icon Rebounds w/285 KO2's. Rago molle panels. C4 Fabrication lo pro with 25" LED and Smittybilt X20 winch. Rago rock sliders. TRD front skid. Spidertrax spacers. Gobi ladder. Yakima SkyRise RTT. ARB Safari snorkel. 14+ tails. Blacked out projector/retro-fit head lights. Baja Designs pro fogs. Dobinsons 2.5" lift w/ ICON delta joint UCA's.
gibburnz is offline   Reply With QuoteReply With Quote
Old 08-15-2019, 07:31 PM #12
nglayton's Avatar
nglayton nglayton is offline
Senior Member
 
Join Date: Mar 2011
Location: Oregon
Age: 56
Posts: 1,257
Real Name: Neal
nglayton has a spectacular aura about nglayton has a spectacular aura about
MY GARAGE
nglayton nglayton is offline
Senior Member
nglayton's Avatar
 
Join Date: Mar 2011
Location: Oregon
Age: 56
Posts: 1,257
Real Name: Neal
nglayton has a spectacular aura about nglayton has a spectacular aura about
MY GARAGE
Quote:
Originally Posted by gibburnz View Post
Hey guys--

I have 14+ aftermarket side mirrors on my 2011 TE. They are powered for mirror control, but they don't have the signals built into them.
Do you still have the Original Trail Mirrors?
nglayton is offline   Reply With QuoteReply With Quote
Old 08-15-2019, 10:27 PM #13
Hans Moleman Hans Moleman is offline
Member
 
Join Date: May 2016
Location: Bay Area, CA
Posts: 398
Hans Moleman will become famous soon enough Hans Moleman will become famous soon enough
Hans Moleman Hans Moleman is offline
Member
 
Join Date: May 2016
Location: Bay Area, CA
Posts: 398
Hans Moleman will become famous soon enough Hans Moleman will become famous soon enough
The sequential lights look awesome

__________________
2018 SR5 Premium MGM
TRD Pro wheels
LT265/70/17C BFG KO2
Hans Moleman is offline   Reply With QuoteReply With Quote
Old 08-15-2019, 11:59 PM #14
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
r1verf3nix r1verf3nix is offline
Member
 
Join Date: Mar 2017
Location: Dallas, TX
Posts: 186
r1verf3nix will become famous soon enough
Quote:
Originally Posted by Hans Moleman View Post
The sequential lights look awesome


Not bad, I am sure it will cost 99$ like everything aftermarket does.
r1verf3nix is offline   Reply With QuoteReply With Quote
Old 08-16-2019, 09:29 AM #15
97BlackAckCL's Avatar
97BlackAckCL 97BlackAckCL is offline
Senior Member
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
97BlackAckCL 97BlackAckCL is offline
Senior Member
97BlackAckCL's Avatar
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 4,520
Real Name: Chris
97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all 97BlackAckCL is a name known to all
MY GARAGE
Quote:
Originally Posted by r1verf3nix View Post
Not bad, I am sure it will cost 99$ like everything aftermarket does.
60 bucks, I paid the same for a spare stock set when I tinted them
__________________
2017 Nautical Blue SR5 Premium - Black Emblem Overlays, AFE TB Spacer, AFE Momentum GT Intake, URD MAF Calibrator, Borla Touring Cat-Back Exhaust, Morimoto HID Headlights, Auxbeam LED Highs, Morimoto Black XB LED Fogs, Fyre Flys LED Interior, Lasfit Amber LED Turn Signals, Smoked Amber LED Raptor Lights, Odyssey 34 Battery, 32" LED Bar with Rago Hidden Brackets, Rago Molle Panels, CaliRaised Low-Pro Ditch Brackets w/ Side Shooter LED Pods, Anti-Dark Underhood LED kit, sPod w/ PowerTray Mount, Raceline Matte Bronze Wheels w/ Cooper Discoverer RTX, N-Fab Side Steps, Satin Black Roof Rails, MB Quart Speakers in all 6 door locations, JBL 3.5" in dash, JL 8w3v3 in JBL Enclosure, Husky Weather Beaters, CanvasBack Liners, ScanGauge
97BlackAckCL is offline   Reply With QuoteReply With Quote
Reply

Tags
built , harness , mirrors , side , signals

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Side mirrors Mod losso 3rd gen T4Rs 5 02-19-2019 02:49 PM
Looking for better “blind spot” mirrors for my side mirrors Rancho5 3rd gen T4Rs 18 11-29-2018 10:14 AM
Side Mirrors on SR5 4runnerlabr 4th Gen T4Rs 5 01-01-2011 11:48 AM
side mirrors BROOKLYN Classifieds - buy & sell (no commercial ads please) 0 11-30-2005 12:41 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 03:36 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2019


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.