Toyota 4Runner Forum - Largest 4Runner Forum

Toyota 4Runner Forum - Largest 4Runner Forum (https://www.toyota-4runner.org/)
-   5th gen T4Rs (https://www.toyota-4runner.org/5th-gen-t4rs/)
-   -   Eibach needs a stock TRD PRO in SoCal (https://www.toyota-4runner.org/5th-gen-t4rs/276287-eibach-needs-stock-trd-pro-socal.html)

LandCruiser 01-08-2020 12:08 PM

Quote:

Originally Posted by Ryan at Eibach (Post 3420823)
No offense, but you are completely confusing everybody. As I was reading your latest post I took a call from a PRO owner who read it and was confused.

Most of us know what you are getting at, but you just stated "2.8 inches taller than stock". Everybody with a PRO that does not have any mods is going to call it "stock". My post even said "Eibach needs a stock PRO".

Can we get a mod to clean all this up?

Again, the Eibach specific PRO spring upgrade will lift a TRD PRO 1.8". They will not work on a non-PRO.

I think because Toyota modifies them at port and they are pseudo-stock, but I get the confusion.

20164runner 01-08-2020 12:16 PM

Quote:

Originally Posted by osideplayer (Post 3420780)
You misread, itís 2.8 total over stock as a pro is already an inch taller. This coils are exclusively for pros. Giving them a 1.8 inch increase ( 2.8 inches Total taller than stock)



1.8Ē would make it level so no i didnít misread it.


Sent from my iPhone using Tapatalk

Steel28 01-08-2020 01:49 PM

@Ryan, when can we order?:smokin:

Flea7907 01-14-2020 09:44 AM

So 285s should be good to go with the extra 1.8? When can we order.

Ryan at Eibach 01-14-2020 11:41 AM

I'll have the first 10 pieces ready in about a week. We'll do a quick day of testing shortly after. If all goes as planned they'll get released for actual production and we'll make 150 kits. At that point they can be ordered and we'll have a good ETA.

MGordo 01-14-2020 12:19 PM

Great! Just let us know when the order can be placed.
Make any difference with ordering throught the local retailer vs direct? Guessing the product wouldnt be listed in the catalogue yet.

Ryan at Eibach 01-14-2020 01:01 PM

Quote:

Originally Posted by MGordo (Post 3424294)
Great! Just let us know when the order can be placed.
Make any difference with ordering throught the local retailer vs direct? Guessing the product wouldnt be listed in the catalogue yet.

You'll be able to order from any Eibach dealer, but nobody will have these in their catalog until they actually hit stock here at Eibach.

fasteddy904 02-08-2020 03:08 PM

Are there any pictures floating around with these front spring changes, either 1" or 1.8" on the TRD Pro?

DallasTRDPro 02-08-2020 04:51 PM

Subbed. I planned on staying stock and adding some 265 KO2's, but with this development I might go with these and go to 285's especially if no other mods are needed like CA's. This will also alter my roof rack plans.

D4Krunner 02-11-2020 09:06 PM

Quote:

Originally Posted by Ryan at Eibach (Post 3424338)
You'll be able to order from any Eibach dealer, but nobody will have these in their catalog until they actually hit stock here at Eibach.

Any updates or ETA?

pumacat24 02-11-2020 09:57 PM

Will someone PLEASE drive a stock 19/20 Pro to @Ryan at Eibach .

We are all waiting for some new springs for lift.

If someone officially does this by the end of Feb. I will literally send you a gift.

Pretty please with a cherry on top.




Sent from my iPhone using Tapatalk

MGordo 02-12-2020 12:00 PM

Quote:

Originally Posted by pumacat24 (Post 3441145)
Will someone PLEASE drive a stock 19/20 Pro to @Ryan at Eibach .

We are all waiting for some new springs for lift.

If someone officially does this by the end of Feb. I will literally send you a gift.

Pretty please with a cherry on top.


Sent from my iPhone using Tapatalk


I think you missed a few posts on some other threads.. its been done... the first batch of 10 was completed a few weeks ago and being tested and then the next batch of 150 will follow.

Ryan at Eibach 02-12-2020 12:18 PM

Quote:

Originally Posted by MGordo (Post 3441374)
I think you missed a few posts on some other threads.. its been done... the first batch of 10 was completed a few weeks ago and being tested and then the next batch of 150 will follow.

The saga continues....the vehicle we need to use for test fit is stuck at the dealer now apparently.

Who has a stock PRO in Socal?

Now you guys understand why the R&D process can take a while on new parts...

ForRun 02-12-2020 05:16 PM

Quote:

Originally Posted by Ryan at Eibach (Post 3441386)
The saga continues....the vehicle we need to use for test fit is stuck at the dealer now apparently.

Who has a stock PRO in Socal?

Now you guys understand why the R&D process can take a while on new parts...

Better to have R&D vs making test units and making customers the guinea pig!

pumacat24 02-19-2020 10:22 AM

Quote:

Originally Posted by Ryan at Eibach (Post 3441386)
The saga continues....the vehicle we need to use for test fit is stuck at the dealer now apparently.

Who has a stock PRO in Socal?

Now you guys understand why the R&D process can take a while on new parts...

Thank you for all of your R&D, Ryan.

Wish I were closer to help and learn about Eibach's processes too.

Looking forward to the final product.


All times are GMT -4. The time now is 03:40 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger