[3s1kill]

I just ordered some Ray10's for my 2015 limited. I'm cheap so I'm looking at the Falken Wildpeaks in 265 or a 285. I want to run 285 with a Daystar 2.5"/1.5" leveling kit but not sure if that's high enough not to rub.

If you have any 17" SCS please comment. I'm looking for people who have a -10mm offset with a 285 so I can finally order some tires. Pictures are welcome.

I searched around but only find 285 tires on TRD PRO or FN FX Pro wheels.

[tristero]

Not sure if you realize there's a whole Stealth Custom Series vendor page
Stealth Custom Series - Toyota 4Runner Forum - Largest 4Runner Forum

With 2 Ray 10 threads
Introducing the RAY10

lots of pics. good luck.

[4runnerJDB]

Originally Posted by 3s1kill

I just ordered some Ray10's for my 2015 limited. I'm cheap so I'm looking at the Falken Wildpeaks in 265 or a 285. I want to run 285 with a Daystar 2.5"/1.5" leveling kit but not sure if that's high enough not to rub.

If you have any 17" SCS please comment. I'm looking for people who have a -10mm offset with a 285 so I can finally order some tires. Pictures are welcome.

I searched around but only find 285 tires on TRD PRO or FN FX Pro wheels.

This guy has a stock lift with 275 70 17 tires on his ray10s. Minor rubbing
http://www.toyota-4runner.org/showthread.php?t=241719

[EEEliminator]

Originally Posted by 3s1kill

I just ordered some Ray10's for my 2015 limited. I'm cheap so I'm looking at the Falken Wildpeaks in 265 or a 285. I want to run 285 with a Daystar 2.5"/1.5" leveling kit but not sure if that's high enough not to rub.

If you have any 17" SCS please comment. I'm looking for people who have a -10mm offset with a 285 so I can finally order some tires. Pictures are welcome.

I searched around but only find 285 tires on TRD PRO or FN FX Pro wheels.

How did you order them, thru their website or did you call? They seem like they're always sold out.

[Steve1155]

I’m running 17” Ray 10s with 275 70 17 BFG KO2’s and I get rubbing on the rear mud flap at almost full lock.

[3s1kill]

Originally Posted by EEEliminator

How did you order them, thru their website or did you call? They seem like they're always sold out.

They have a subscription thread that tell you when they are in stock. SCS said they won't have more until Mid May. When you order it is online only and you better have quick fingers or Apple pay/Samsung pay remember your payment info cause they sell out within 2 minutes.

[3s1kill]

Originally Posted by Steve1155

I’m running 17” Ray 10s with 275 70 17 BFG KO2’s and I get rubbing on the rear mud flap at almost full lock.

I'm pretty sure 285's are gonna rub like crazy then. I ended up ordering 265's WildPeaks.

[SoCal_Trail]

I have the Ray 10's on 285 Falken Wildpeaks, Icon suspension all around, and Wheeler's T13 rear coil. I was rubbing while turning left or right on the front mud flap. Removed it and it took care of that rubbing issue. Had to do the wheel well mod and trim some of the front bumper to avoid rubbing in reverse.

[3s1kill]

Originally Posted by SoCal_Trail

I have the Ray 10's on 285 Falken Wildpeaks, Icon suspension all around, and Wheeler's T13 rear coil. I was rubbing while turning left or right on the front mud flap. Removed it and it took care of that rubbing issue. Had to do the wheel well mod and trim some of the front bumper to avoid rubbing in reverse.

Thank you for chiming in. It's a good thing I didn't get the 285's then. I was looking at the Icon suspension but that's out of the questions right now.

[thevanillagorilla]

I have the Icon Stage 5 with SCS Ray 10s and 285 KO2s and the rubbing on the body mount is tremendously bad. Body mount chop mod coming ASAP.

[zeindog]

I have 285’s with a Icon stage 2 and no rubbing. I did set the front coilovers to the max height and had the caster set high so that probably helped.


Sent from my iPhone using Tapatalk

[oobaa47]

I have ray10's with fallen wildpeak 285's on a toytech 3"/2" lift. Getting slight rub at full lock reverse on the body mount......I removed the front mudflaps and trimmed the bumper.....

[TfourR]

Originally Posted by thevanillagorilla

I have the Icon Stage 5 with SCS Ray 10s and 285 KO2s and the rubbing on the body mount is tremendously bad. Body mount chop mod coming ASAP.

That’s odd. I have SCS SR8s with 285 KO2s with Radflo coilovers and have zero rubbing with my caster set to 3.2 degrees on both sides

[thevanillagorilla]

Originally Posted by TfourR

That’s odd. I have SCS SR8s with 285 KO2s with Radflo coilovers and have zero rubbing with my caster set to 3.2 degrees on both sides

Yeah, I’m told I chose the wrong UCAs (Icon tubular delta joint) and they prevent me from being able to change caster. So...body mount chop coming up.

[TfourR]

Originally Posted by thevanillagorilla

Yeah, I’m told I chose the wrong UCAs (Icon tubular delta joint) and they prevent me from being able to change caster. So...body mount chop coming up.

Ahh. Yes, that’ll do it.