It would be awesome if you could share all of the materials you bought with links.
Question: I see you are utilizing the 4 stock mounting locations, but it looks like there's some feet at the front in front of sunroof too. Did you drill and put a mount there are does it just rest on the rail?
__________________ 2014 SR5P
5100s w/Dobinsons 302/505 springs - SCS F5s - 285/70 Wildpeak AT3W - Prinsu Full Length Rack - Smittybilt Gen 2 RTT - Full RCI skids - RSG sliders - Pedal Commander - Gobi ladder - Rago brackets and 32" LED light bar- TSO TRD Pro grille - 5k HIDs - ARB diff breather - other small stuff
It would be awesome if you could share all of the materials you bought with links.
Question: I see you are utilizing the 4 stock mounting locations, but it looks like there's some feet at the front in front of sunroof too. Did you drill and put a mount there are does it just rest on the rail?
I got the crossbars from here: EX-1020-BLACK – 1″ x 2″ Smooth T-Slotted Aluminum Extrusion – Black Anodize – NEW | TNUTZ
For fasteners, go to McMaster and get two packs of 97763A267 (black stainless bolts) and one of 96765A140 (washers)
The side aluminum (2"x1/4" two pieces 8ft long) I got from my local hardware store but you can get it from MetalsDepot.com for not too much.
The feet on the front are rubber bumpers I had lying around but you can get similar ones here: (McMaster-Carr. I mounted them to the extruded aluminum so that they just press down on the black rubber seams in the roof. I don't think they're needed unless you're loading up the front of the rack with heavy stuff, though they might help keep it from vibrating around.
I got the crossbars from here: EX-1020-BLACK – 1″ x 2″ Smooth T-Slotted Aluminum Extrusion – Black Anodize – NEW | TNUTZ
For fasteners, go to McMaster and get two packs of 97763A267 (black stainless bolts) and one of 96765A140 (washers)
The side aluminum (2"x1/4" two pieces 8ft long) I got from my local hardware store but you can get it from MetalsDepot.com for not too much.
The feet on the front are rubber bumpers I had lying around but you can get similar ones here: (McMaster-Carr. I mounted them to the extruded aluminum so that they just press down on the black rubber seams in the roof. I don't think they're needed unless you're loading up the front of the rack with heavy stuff, though they might help keep it from vibrating around.
You rock! Thanks
__________________ 2014 SR5P
5100s w/Dobinsons 302/505 springs - SCS F5s - 285/70 Wildpeak AT3W - Prinsu Full Length Rack - Smittybilt Gen 2 RTT - Full RCI skids - RSG sliders - Pedal Commander - Gobi ladder - Rago brackets and 32" LED light bar- TSO TRD Pro grille - 5k HIDs - ARB diff breather - other small stuff
good job. i also think full roof racks out there cost too much. especially gobi. here is mine in the making.
Sent from my iPhone using Tapatalk
__________________
2019 t4r orp . Mgm . 17" fuel nitro rims 17x8, -6 offset, ko2 285/70-17, hylux hid, king 2.5 remote res coilovers, icon 2" rear springs, timbren bump stops, sso sliders, Gobi stealth rack, sso front bumper, smittybilt zx20 winch, baja design 30" led light bar, baja design pro fogs, rci skid plates, arb awning, arb underhood air compressor, arb rear diff breather kit, icon uca delta joints, Trd cold air intake, pedal command, urd Trd maf, aux beam led drl, trd air accelerator, raptor lights, odyssey 34 battery, mb quart speakers, husky weather liners, anti dark Underhood led kit, I don't have any of the mods listed above, wrote them down just to look cool..
Even as a Gobi owner, much respect for coming up with a purpose-built rack on your own. Double credit for the no-bs explanation video to help others. Primo post.
Linear Mode
