User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-13-2020, 11:09 PM #151
RusPro17 RusPro17 is offline
Member
 
Join Date: Oct 2017
Location: Pa.
Posts: 587
Real Name: Don
RusPro17 has a spectacular aura about RusPro17 has a spectacular aura about RusPro17 has a spectacular aura about
RusPro17 RusPro17 is offline
Member
 
Join Date: Oct 2017
Location: Pa.
Posts: 587
Real Name: Don
RusPro17 has a spectacular aura about RusPro17 has a spectacular aura about RusPro17 has a spectacular aura about
Quote:
Originally Posted by papadop88 View Post
I've received a few messages asking where I mounted the Sprint Booster.

Here it is. I ran and ziptied it up through the footwell and under the undercarriage into that blank cap. Took the cap out, dremeled out a hole big enough for the wire to pass through and stuck it to the back of the cap with the adhesive the booster came with already.

Super clean, out of sight, no wires showing, yet easy access with my right hand to make changes on the fly.

So you are saying about the sprint booster that where I was going to add mine there. Have not done it yet. But you are saying does the cap just pop out and still needed to drill a Hole behind that to get the wire thru?
RusPro17 is offline   Reply With QuoteReply With Quote
Old 02-14-2020, 01:01 PM #152
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Quote:
Originally Posted by RusPro17 View Post
So you are saying about the sprint booster that where I was going to add mine there. Have not done it yet. But you are saying does the cap just pop out and still needed to drill a Hole behind that to get the wire thru?
That's correct. Pop that cap off, take a dremel and make a hole in the bottom edge of the cap exactly wide enough to pass the wire through. Should take 10 mins going slow.
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-16-2020, 06:14 PM #153
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Was just admiring her...



papadop88 is offline   Reply With QuoteReply With Quote
Old 02-16-2020, 08:10 PM #154
delloro's Avatar
delloro delloro is offline
Senior Member
 
Join Date: Apr 2015
Location: I. E. So. Cal
Posts: 1,162
delloro is just really nice delloro is just really nice delloro is just really nice delloro is just really nice
delloro delloro is offline
Senior Member
delloro's Avatar
 
Join Date: Apr 2015
Location: I. E. So. Cal
Posts: 1,162
delloro is just really nice delloro is just really nice delloro is just really nice delloro is just really nice
Quote:
Originally Posted by papadop88 View Post
Was just admiring her...



Truck's nice, but I'm kinda stuck on that neat, clean garage....
delloro is offline   Reply With QuoteReply With Quote
Old 02-16-2020, 10:04 PM #155
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Quote:
Originally Posted by delloro View Post
Truck's nice, but I'm kinda stuck on that neat, clean garage....
LOL. Ya, I kinda have OCD. If you think this one's clean, you should see my other garage.
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-16-2020, 10:23 PM #156
ForRun's Avatar
ForRun ForRun is offline
Senior Member
 
Join Date: Feb 2019
Location: Chicago burbs
Posts: 1,025
ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all
ForRun ForRun is offline
Senior Member
ForRun's Avatar
 
Join Date: Feb 2019
Location: Chicago burbs
Posts: 1,025
ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all ForRun is a name known to all
Quote:
Originally Posted by papadop88 View Post
LOL. Ya, I kinda have OCD. If you think this one's clean, you should see my other garage.
ForRun is offline   Reply With QuoteReply With Quote
Old 02-18-2020, 11:36 PM #157
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
***Update***

So it's been a couple weeks since I switched to the King setup. Loving every aspect of it with the exception of the rear stock springs.

Now that everything is settling, the rear has settled further than the fronts and no longer have the small rake up front (which is what I want). I don't want to lower the front anymore as I like that height. I am 32" (fender to bottom of wheel) in the front and 32" in the rear (fender to bottom of wheel).

Also, the rear stock springs are feeling too soft for me the more I drive it. When I fill the gas tank up full, I also have the dreaded driver's side lean in the rear.

Therefore I'm ordering the 1" Eibachs from Ryan @ Eibach to swap out the coils. Should add around 0.6" to 1" of lift in the rear Maybe after settling it'll have the exact rake I'm looking for without lowering the front. As for the lean, I'm going to be adding a rear trim spacer (Dobinsons), either 10mm or 15mm to balance the rear out a bit.
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 12:07 AM #158
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
I told myself I wouldn't get wheels for this truck because I really like the Pro wheels, but I also told myself I wouldn't swap suspension from the Pro's Fox suspension. So here I am...Hi, I'm Papa and I'm a modaholic.

Been eyeing the SCS wheels and I wanted to go the blue on white truck route...since I went with Kings.

So here are my new BR6 wheels in Stealth Blue. Hoping to mount them sometime this weekend or next week.

17x8.5 -10 (4.3" BS)







__________________
2020 TRD Pro | Super White | C4 Fab Lo-Pro Bumper | Warn Evo VR10-S Winch | Factor55 ProLink | Morimoto XB Headlights | Baja Designs Squadron Amber SAE Fog Lights | USR Rear Black Tailights | Shrockworks Angled Sliders | Sprint Booster V3 | TRD OEM CAI | Llumar CTX 25% | King 2.5 Front Coilovers w/ Res Adjusters and rear 3-Tube Bypass Shocks | Camburg UCAs | Eibach 1" Rear Coils | RRW-7H Graphite Blue 17x8.5 -12 | KO2s 285/70/17 | Raptor Lights | Prinsu Roof Rack w/ Cali Raised 40" Amber LED Bar | GOBI Ladder | Agency6 Recovery Shackle | Baja Designs Squadron Ditch Lights | Cali Raised Molle Panels
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 02:15 AM #159
kiwiflavored kiwiflavored is offline
Junior Member
 
Join Date: Feb 2020
Posts: 17
kiwiflavored is on a distinguished road
kiwiflavored kiwiflavored is offline
Junior Member
 
Join Date: Feb 2020
Posts: 17
kiwiflavored is on a distinguished road
Quote:
Originally Posted by papadop88 View Post
Was just admiring her...



Those lopro bumpers are so hot but I can't get myself to cut the oem bumper
kiwiflavored is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 12:16 PM #160
DallasTRDPro's Avatar
DallasTRDPro DallasTRDPro is offline
Member
 
Join Date: Apr 2018
Posts: 727
DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light
DallasTRDPro DallasTRDPro is offline
Member
DallasTRDPro's Avatar
 
Join Date: Apr 2018
Posts: 727
DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light DallasTRDPro is a glorious beacon of light
Quote:
Originally Posted by papadop88 View Post
I told myself I wouldn't get wheels for this truck because I really like the Pro wheels, but I also told myself I wouldn't swap suspension from the Pro's Fox suspension. So here I am...Hi, I'm Papa and I'm a modaholic.

Been eyeing the SCS wheels and I wanted to go the blue on white truck route...since I went with Kings.

So here are my new BR6 wheels in Stealth Blue. Hoping to mount them sometime this weekend or next week.

17x8.5 -10 (4.3" BS)
I've said the same thing. I'm really just trying to do need mods not wants. Coming from 5 Jeeps in last 15 years I have spent way too much unrecoverable money on my vehicles and the 4R takes way too much modding to make mods work. I trade in my vehicles way too much to waste that much money again. Problem is I have no wife to say no or kids to look at that won't be going to college to keep me from my own stupidity and insanity. I love your white TRD Pro. I really wanted white but there wasn't one close enough and I needed one immediately since I didn't want to track down death wobble in my Jeep anymore.
DallasTRDPro is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 12:23 PM #161
Ryan at Eibach's Avatar
Ryan at Eibach Ryan at Eibach is offline
official vendor
 
Join Date: Jan 2019
Location: Corona
Posts: 516
Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light
Ryan at Eibach Ryan at Eibach is offline
official vendor
Ryan at Eibach's Avatar
 
Join Date: Jan 2019
Location: Corona
Posts: 516
Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light Ryan at Eibach is a glorious beacon of light
Quote:
Originally Posted by papadop88 View Post
Was just admiring her...



Nice!
__________________
2019 TRD Off Road
2007 GT3
1982 911 SC
Ryan at Eibach is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 04:07 PM #162
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Quote:
Originally Posted by kiwiflavored View Post
Those lopro bumpers are so hot but I can't get myself to cut the oem bumper
They are so damn sexy. I though the same originally, but bumper covers are cheap to replace. If you ever want to revert, just buy a new one and paint it...keep your original black valance and actual metal bumper and that's it.
__________________
2020 TRD Pro | Super White | C4 Fab Lo-Pro Bumper | Warn Evo VR10-S Winch | Factor55 ProLink | Morimoto XB Headlights | Baja Designs Squadron Amber SAE Fog Lights | USR Rear Black Tailights | Shrockworks Angled Sliders | Sprint Booster V3 | TRD OEM CAI | Llumar CTX 25% | King 2.5 Front Coilovers w/ Res Adjusters and rear 3-Tube Bypass Shocks | Camburg UCAs | Eibach 1" Rear Coils | RRW-7H Graphite Blue 17x8.5 -12 | KO2s 285/70/17 | Raptor Lights | Prinsu Roof Rack w/ Cali Raised 40" Amber LED Bar | GOBI Ladder | Agency6 Recovery Shackle | Baja Designs Squadron Ditch Lights | Cali Raised Molle Panels
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 04:08 PM #163
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Quote:
Originally Posted by DallasTRDPro View Post
I've said the same thing. I'm really just trying to do need mods not wants. Coming from 5 Jeeps in last 15 years I have spent way too much unrecoverable money on my vehicles and the 4R takes way too much modding to make mods work. I trade in my vehicles way too much to waste that much money again. Problem is I have no wife to say no or kids to look at that won't be going to college to keep me from my own stupidity and insanity. I love your white TRD Pro. I really wanted white but there wasn't one close enough and I needed one immediately since I didn't want to track down death wobble in my Jeep anymore.
Thanks brother. I also hear ya on the unrecoverable money. But if it makes you happy, just do it. Who cares, especially if you don't have kids or a wife to think about.
__________________
2020 TRD Pro | Super White | C4 Fab Lo-Pro Bumper | Warn Evo VR10-S Winch | Factor55 ProLink | Morimoto XB Headlights | Baja Designs Squadron Amber SAE Fog Lights | USR Rear Black Tailights | Shrockworks Angled Sliders | Sprint Booster V3 | TRD OEM CAI | Llumar CTX 25% | King 2.5 Front Coilovers w/ Res Adjusters and rear 3-Tube Bypass Shocks | Camburg UCAs | Eibach 1" Rear Coils | RRW-7H Graphite Blue 17x8.5 -12 | KO2s 285/70/17 | Raptor Lights | Prinsu Roof Rack w/ Cali Raised 40" Amber LED Bar | GOBI Ladder | Agency6 Recovery Shackle | Baja Designs Squadron Ditch Lights | Cali Raised Molle Panels
papadop88 is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 04:23 PM #164
Blinkyjoe's Avatar
Blinkyjoe Blinkyjoe is offline
Member
 
Join Date: Feb 2020
Location: Mercer Island
Posts: 42
Blinkyjoe is on a distinguished road
Blinkyjoe Blinkyjoe is offline
Member
Blinkyjoe's Avatar
 
Join Date: Feb 2020
Location: Mercer Island
Posts: 42
Blinkyjoe is on a distinguished road
Beautiful build

Crazy cool build, thanks for sharing the play-by-play! I wish I had your buying power. Los Angeles.....are you in "The Industry"?
Blinkyjoe is offline   Reply With QuoteReply With Quote
Old 02-28-2020, 04:31 PM #165
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
papadop88 papadop88 is offline
Member
 
Join Date: Oct 2019
Location: Los Angeles
Posts: 362
papadop88 is a jewel in the rough papadop88 is a jewel in the rough papadop88 is a jewel in the rough
Quote:
Originally Posted by Blinkyjoe View Post
Crazy cool build, thanks for sharing the play-by-play! I wish I had your buying power. Los Angeles.....are you in "The Industry"?
Thanks man. Kinda ;)

But if I could leave this freakin crappy state, I would in a heartbeat. Not much buying power left for us folks thanks to our state policies. It all goes to the 'man' or to the handouts.
__________________
2020 TRD Pro | Super White | C4 Fab Lo-Pro Bumper | Warn Evo VR10-S Winch | Factor55 ProLink | Morimoto XB Headlights | Baja Designs Squadron Amber SAE Fog Lights | USR Rear Black Tailights | Shrockworks Angled Sliders | Sprint Booster V3 | TRD OEM CAI | Llumar CTX 25% | King 2.5 Front Coilovers w/ Res Adjusters and rear 3-Tube Bypass Shocks | Camburg UCAs | Eibach 1" Rear Coils | RRW-7H Graphite Blue 17x8.5 -12 | KO2s 285/70/17 | Raptor Lights | Prinsu Roof Rack w/ Cali Raised 40" Amber LED Bar | GOBI Ladder | Agency6 Recovery Shackle | Baja Designs Squadron Ditch Lights | Cali Raised Molle Panels
papadop88 is offline   Reply With QuoteReply With Quote
Reply

Tags
build , led , papadop88s , pro , trd

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
>BUILD THREAD< The4kbeast's 3rd-Gen 2000 T4R SR5 (Highlander Edition) 4x4 Build The4kbeast 3rd gen T4Rs 285 07-25-2018 09:37 PM
1998 T4R Build Thread/Rear bumper build 4running11191 4running11191 3rd gen T4Rs 3 09-19-2014 07:07 PM
Snow White build 2006 v8 adventure overland apocalypse build Dubs Chops 4th Gen T4Rs 24 04-25-2014 09:25 AM
Guyduebro's Surf build..De-build Guydudebro 3rd gen T4Rs 3 03-17-2013 08:27 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 06:29 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020