User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 03-24-2020, 05:06 PM #1
Lifeline's Avatar
Lifeline Lifeline is offline
Member
 
Join Date: Dec 2018
Location: Jacksonville, Fl
Posts: 100
Lifeline is on a distinguished road
Lifeline Lifeline is offline
Member
Lifeline's Avatar
 
Join Date: Dec 2018
Location: Jacksonville, Fl
Posts: 100
Lifeline is on a distinguished road
Puddle light problems?

Ok,
For some reason, any time I do a simple “easy” install, something on my truck screws up. I went to upgrade my puddle light bulbs in the mirrors. Got everything taken apart just fine. Problem came when I went to put the new bulbs in. They would push in the socket, and fall right back out. I had the correct bulbs. I tried several times and they wouldn’t fit. So I gave up and went to put the stock bulb back in, now the same thing happens with that one. The stock bulb won’t even stay in place?? So I put it all back together and now no puddle light on the drivers side (I never took the passenger side apart). Any suggestions or ideas? Spent over an hour on a quick and easy mod, with nothing to show but frustration!!
Lifeline is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 05:42 PM #2
daytonaviolet's Avatar
daytonaviolet daytonaviolet is offline
Senior Member
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
daytonaviolet daytonaviolet is offline
Senior Member
daytonaviolet's Avatar
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
Quote:
Originally Posted by Lifeline View Post
Ok,
For some reason, any time I do a simple “easy” install, something on my truck screws up. I went to upgrade my puddle light bulbs in the mirrors. Got everything taken apart just fine. Problem came when I went to put the new bulbs in. They would push in the socket, and fall right back out. I had the correct bulbs. I tried several times and they wouldn’t fit. So I gave up and went to put the stock bulb back in, now the same thing happens with that one. The stock bulb won’t even stay in place?? So I put it all back together and now no puddle light on the drivers side (I never took the passenger side apart). Any suggestions or ideas? Spent over an hour on a quick and easy mod, with nothing to show but frustration!!
i updated all interior and puddle lights to led without any issues. do you have pictures of the inside of your puddle lights? want to see what's causing the bulbs to fall out. perhaps something was bent when you removed the original bulbs?
daytonaviolet is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 06:51 PM #3
flyrv9's Avatar
flyrv9 flyrv9 is offline
Senior Member
 
Join Date: Dec 2012
Location: Clearwater Kansas
Posts: 1,295
flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough
flyrv9 flyrv9 is offline
Senior Member
flyrv9's Avatar
 
Join Date: Dec 2012
Location: Clearwater Kansas
Posts: 1,295
flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough
I would compare the physical size of an old and new bulb and see if they are the same. Either the contact pins or tabs are different; or the body of the new bulb is different and doesn't fit well. The problem with a lot of this aftermarket stuff is that it's just crap. Oh, and remember to pull the appropriate fuse or disconnect the battery before starting anything electrical.
flyrv9 is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 07:44 PM #4
Lifeline's Avatar
Lifeline Lifeline is offline
Member
 
Join Date: Dec 2018
Location: Jacksonville, Fl
Posts: 100
Lifeline is on a distinguished road
Lifeline Lifeline is offline
Member
Lifeline's Avatar
 
Join Date: Dec 2018
Location: Jacksonville, Fl
Posts: 100
Lifeline is on a distinguished road
The problem is the old bulb won’t even fit in now. It pulled out just fine and was “snug”. Now it’s like nothing grabs the bulb when I plug it in. I can still see the socket connectors, but nothing wants to hold either the old or the new bulb in place if that makes sense.
Lifeline is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 08:22 PM #5
flyrv9's Avatar
flyrv9 flyrv9 is offline
Senior Member
 
Join Date: Dec 2012
Location: Clearwater Kansas
Posts: 1,295
flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough
flyrv9 flyrv9 is offline
Senior Member
flyrv9's Avatar
 
Join Date: Dec 2012
Location: Clearwater Kansas
Posts: 1,295
flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough flyrv9 is a jewel in the rough
Yes it makes sense. It sounds like the contacts got spread apart or bent in a way that they now don't hold well so the bulb is loose. I'd carefully pull the bulb that works and compare the two sockets. You might be able to discover the issue and fix it by carefully adjusting the contacts.
flyrv9 is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 08:41 PM #6
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Your new bulb probably has a wider base and when you pushed it in it it wasn’t square, it was probably cocked at an angle and the brass contacts in the socket got hyper extended, now they are too far apart or bent over. Look at them and with a small thin screwdriver blade carefully bend them back into place. You may want to disassemble the passenger side to use as an example of how they should look. Be careful so you don’t break the contacts. And as preciously mentioned, remove the fuse or battery ground while working on it. Good luck.

PS, Your local auto parts store probably has an exact LED replacement in the Philips or Sylvania brand (168?). They will fit properly.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 03-24-2020, 09:58 PM #7
daytonaviolet's Avatar
daytonaviolet daytonaviolet is offline
Senior Member
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
daytonaviolet daytonaviolet is offline
Senior Member
daytonaviolet's Avatar
 
Join Date: Jun 2004
Location: Bay Area, CA
Posts: 1,409
daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold daytonaviolet is a splendid one to behold
Puddle light problems?

Quote:
Originally Posted by Lifeline View Post
The problem is the old bulb won’t even fit in now. It pulled out just fine and was “snug”. Now it’s like nothing grabs the bulb when I plug it in. I can still see the socket connectors, but nothing wants to hold either the old or the new bulb in place if that makes sense.


I believe the metal legs which clamp on the bulbs may have bent. You probably bent it out of shape so it can’t hold the bulb.

Last edited by daytonaviolet; 03-24-2020 at 10:03 PM.
daytonaviolet is offline   Reply With QuoteReply With Quote
Old 03-25-2020, 12:28 PM #8
97BlackAckCL's Avatar
97BlackAckCL 97BlackAckCL is offline
Elite Member
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 5,686
Real Name: Chris
97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future
97BlackAckCL 97BlackAckCL is offline
Elite Member
97BlackAckCL's Avatar
 
Join Date: Mar 2010
Location: Pittsburgh
Posts: 5,686
Real Name: Chris
97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future 97BlackAckCL has a brilliant future
Yep, sounds like you bent the pin contacts
__________________
2017 Nautical Blue SR5 Premium - Black Emblems, AFE 76mm TB, AFE Momentum GT Intake, URD MAF Calibrator, Borla Touring Cat-Back Exhaust, VR ECU Tune, RCI Skid Plate, Morimoto MLED 2.0 Headlight Retrofit, Morimoto LED Fogs, Eagle Eye Smoked Black Tail Lights, FyreFlys LED Interior, Meso Puddle Lights, Tinted Mirror Turn Signals, Smoked Amber Raptor Lights, Odyssey 34 Battery, 32" LED Bar with Rago Hidden Brackets, Rago Molle Panels, Side Shooter LED Ditch Lights, sPod w/ PowerTray, Raceline Matte Bronze Wheels w/ Cooper Discoverer RTX, CaliRaised Rock Sliders, BajaRack Full Length Roof Rack, Kenwood DMX1057XR, Infinity Kappa Door Speakers and 3.5's in dash, JL 8w3v3 in JBL Enclosure, Husky Weather Beaters, Blackvue DR900S Dash Cams
97BlackAckCL is offline   Reply With QuoteReply With Quote
Old 03-26-2020, 05:15 PM #9
scoplnr scoplnr is offline
Junior Member
 
Join Date: Feb 2014
Location: southern oregon
Posts: 11
Real Name: scott
scoplnr is on a distinguished road
scoplnr scoplnr is offline
Junior Member
 
Join Date: Feb 2014
Location: southern oregon
Posts: 11
Real Name: scott
scoplnr is on a distinguished road
I just did this. The puddle lights/connectors are in a rubber sheath inside a plastic outer cover. What happened is the connectors moved too far inside the rubber sheath and now wont connect. You need to push the plaster outer cover back and then take some tweezers and pull the connectors through to the outside of the rubber piece. Once you have them both out then slowly push them back into the rubber piece, but not to far. They will hold there and then hold the bulb.
scoplnr is offline   Reply With QuoteReply With Quote
Reply

Tags
back , bulbs , light , puddle , put

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Puddle Light Issue Moses_J 5th gen T4Rs 0 07-14-2019 09:33 PM
Puddle Light Bulb - Help JKRunner 5th gen T4Rs 4 12-05-2018 02:31 PM
Puddle Problems... bryantd85 5th gen T4Rs 57 05-05-2016 10:18 PM
5th gen puddle led light help rig 5th gen T4Rs 4 09-29-2014 09:05 AM
puddle then batt light .. giguchan 3rd gen T4Rs 8 09-10-2008 09:07 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 03:53 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020