[Mudhorn]

Originally Posted by Unit 91

There is almost never a good reason to use red. Unless you really don't want something to come apart - ever.

Agree. 15mm bolt. You know how it is, “this is the way it will be forever“. Then you look at your vehicle again 1 year later and think “that seems more practical over here.”

[Mudhorn]

Originally Posted by patkelly4370

Put a soldering iron on the head of the bolt or the nut itself.

Interesting, I’ll have to keep this in my hip pocket for next time.

[LandCruiser]

Direct heat

And red loctite is essentially glue

[BigEd01]

yep, i never use red loctite UNLESS i know for a fact i don't ever want to remove the part personally. you have been given solid advice with the soldering iron tip held on the head of the screw/bolt for awhile to break the red lt down then quickly put an impact wrench or something on it and unscrew the bolt.
Big Ed

[jrandom]

For the most part I always use purple 222ms "loctite" branded as a replacement for toyota red. Even blue can be a bugger if used on small fasteners.