Quote:
Originally Posted by Airwolf
Good install article. The Boss Box is BadA$$.
I installed my Boss Strongbox about a month ago and did have a small issue. The lock rods that are attached to the center knob got loose (just screwed in) and one fell out into the channel and was rattling around. This was the only indication something had "changed" as there was no rattles before! I removed the channel cover and re-installed it using Loctite. If you have or are getting one of these boxes you should probably check to make sure they are tight. Simple lock drawer while it is out of the box and see if you can turn the locking rods. easy enough to slightly unscrew and drop a drop of Loctite on the threads and re-tighten.
Also I installed a 3/4" high by 1.5" thick synthetic board the length of the Boss box between the rear of the box and the rear seat stop. This gives something secure for the box to go against.
|
The right side lock rod fell out on mine as well, installed loctite. I contacted the company and they said that they would start applying loctite to the rods and fasteners. Also, check the central bolt that holds the lock arm in place, mine was very loose.
Sent from my SM-T813 using Tapatalk