User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-09-2020, 07:56 AM #31
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Quote:
Originally Posted by Hungster44 View Post
With these instructions it will give us everything we need for 1 bar correct? It is not a set? So if we wanted say 4 bars we would need to increase the quantity? Also what is the load strength on these bars? I would look to add a 180lb RTT plus people in it of course. Thanks!
Electroboy is correct. You will need to order 4 individual bars when you make an order to Tnutz.

As far as the loading, in a static condition the bars and brackets will hold in excess of 1000 pounds. I'm a pretty large guy and I mounted up the brackets on a bar put it on the ground and lightly shifted my weight on it. The bar will flex a bit but no issues. I weight about 280.

The bolts have a yield strength of 65k PSI. At this point the weakest part will be the rails. As Electroboy stated the listed rating is around 150 pounds with the factory rails. Once installed the rack setup is remarkably solid. I think that actually knowing the weight it would hold would require destructive testing and I'm not ready to offer my wife's 4Runner up to the gods of knowledge just yet.

If I had to take a guess, I'd say it would hold a rooftop tent and occupants. The failure mode would have to be a deformation of the rail itself. Between the rail and the mounting point I think it's the weaker link but I think it will carry a significant amount of weight before that happens.
Eitek1 is offline   Reply With QuoteReply With Quote
Old 07-09-2020, 03:19 PM #32
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Order?

I am ordering today, but want to make sure I get this right. I order 4 crossbars, to the specs given in the previous post, easy enough. Then I order a set of 4 brackets? Or 2 sets of 4 brackets?
__________________
2015 T4R Trail Red, 3” lift, 285s, Niserack, HF rock sliders, BA bumper
2006 4runner sport, v6, Tacoma TRD springs front, airbags And 2” spacers in rear. 440k and still chuggin along.
1977 FJ40, V8, lifted, Warn 8274 winch etc.
2006 GX470, 285s, 2” lift, C4lo sliders
Jpilot is offline   Reply With QuoteReply With Quote
Old 07-09-2020, 04:34 PM #33
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Quote:
Originally Posted by Jpilot View Post
I am ordering today, but want to make sure I get this right. I order 4 crossbars, to the specs given in the previous post, easy enough. Then I order a set of 4 brackets? Or 2 sets of 4 brackets?
One set of 4 brackets. That’s all the brackets you’ll need for 4 bars.
Eitek1 is offline   Reply With QuoteReply With Quote
Old 07-10-2020, 01:35 AM #34
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Ordered

Just ordered. I look forward to getting this put on, looks awesome so far...
__________________
2015 T4R Trail Red, 3” lift, 285s, Niserack, HF rock sliders, BA bumper
2006 4runner sport, v6, Tacoma TRD springs front, airbags And 2” spacers in rear. 440k and still chuggin along.
1977 FJ40, V8, lifted, Warn 8274 winch etc.
2006 GX470, 285s, 2” lift, C4lo sliders
Jpilot is offline   Reply With QuoteReply With Quote
Old 07-11-2020, 09:52 PM #35
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Now my curiosity is getting the better of me. I want to do some destructive testing just to see what it will take to fail my rack system.

Anyone know where I can get a 5th gen pull off rack? I figure I could build a jig pretty easy and I have access to a tote tank. I could just fill it with water until it failed.

It would be an awesome experiment.
Eitek1 is offline   Reply With QuoteReply With Quote
Old 07-12-2020, 01:16 PM #36
jp.vegas jp.vegas is offline
Member
 
Join Date: Oct 2019
Location: Las Vegas
Posts: 830
jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light
jp.vegas jp.vegas is offline
Member
 
Join Date: Oct 2019
Location: Las Vegas
Posts: 830
jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light
Interesting. In theory I could source a set of the “standard” factory roof rails, buy these brackets and extrusions and end up way cheaper than buying a $1000 aftermarket rack to replace my pro rack.

The issue I have with the pro rack is that it’s limiting me from lifting the vehicle, even by using larger tires, due to its excessive height off the roof that already hits the parking garage at work.
__________________
'20 Army Green 4Runner TRD PRO
'16 Quicksand Tundra TRD PRO Gone
'08 Salsa Red Pearl 4x4Runner SE V6:
Gone
jp.vegas is offline   Reply With QuoteReply With Quote
Old 07-12-2020, 01:22 PM #37
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by Eitek1 View Post
Now my curiosity is getting the better of me. I want to do some destructive testing just to see what it will take to fail my rack system.

Anyone know where I can get a 5th gen pull off rack? I figure I could build a jig pretty easy and I have access to a tote tank. I could just fill it with water until it failed.

It would be an awesome experiment.
I see there are some for sale on eBay.

2010-2019 Toyota 4Runner 5th Gen Roof Rack Rail Cross bars Black End Caps OEM | eBay


2010 - 2019 OEM TOYOTA 4RUNNER ROOF RACK CROSS BAR 4 PIECE KIT PT278-89170 | eBay


Stock Toyota 2010-2019 4Runner Roof Rails With End Caps And Mounting Hardware | eBay

Also a forum member:

5th Gen OEM Roof Rack - $125 + shipping -- SW CO

It would be great if someone would donate a rack for the cause of science.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 07-12-2020, 06:09 PM #38
jp.vegas jp.vegas is offline
Member
 
Join Date: Oct 2019
Location: Las Vegas
Posts: 830
jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light
jp.vegas jp.vegas is offline
Member
 
Join Date: Oct 2019
Location: Las Vegas
Posts: 830
jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light jp.vegas is a glorious beacon of light
Quote:
Originally Posted by Eitek1 View Post
Honestly my first response was "yeah, I'm not messing with that". I do like a challenge though so give me a few days to think on it.

On second thought, what is the diameter of the bar? I think I might have an idea....
I just checked mine. The pro rack round bars are 1 3/4” OD.
__________________
'20 Army Green 4Runner TRD PRO
'16 Quicksand Tundra TRD PRO Gone
'08 Salsa Red Pearl 4x4Runner SE V6:
Gone
jp.vegas is offline   Reply With QuoteReply With Quote
Old 07-13-2020, 03:55 AM #39
redcometchar7 redcometchar7 is offline
Junior Member
 
Join Date: Jul 2020
Location: Chino, CA
Posts: 1
redcometchar7 is on a distinguished road
redcometchar7 redcometchar7 is offline
Junior Member
 
Join Date: Jul 2020
Location: Chino, CA
Posts: 1
redcometchar7 is on a distinguished road
NiseRack vs. Toyota's CrossBar

I'm thinking to buy a roof tent, Roofnest Sparrow that has a spect of 134lbs, for my 2016 T4R SR5, 5th Gen.

I think somewhere I read the 2 Toyota Cross Bars would give you the support for 130lbs.

Would these NiserRack give you more support/more weight they can handle with the 4 bars?

Trying to see if there's any +/advantage of going with these NiserRack, instead of the Toyota's.

Welcome your thought on this, & thanks in advance.
redcometchar7 is offline   Reply With QuoteReply With Quote
Old 07-13-2020, 04:46 AM #40
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by redcometchar7 View Post
I'm thinking to buy a roof tent, Roofnest Sparrow that has a spect of 134lbs, for my 2016 T4R SR5, 5th Gen.

I think somewhere I read the 2 Toyota Cross Bars would give you the support for 130lbs.

Would these NiserRack give you more support/more weight they can handle with the 4 bars?

Trying to see if there's any +/advantage of going with these NiserRack, instead of the Toyota's.

Welcome your thought on this, & thanks in advance.

I don’t believe anyone uses the Toyota crossbars to mount a rooftop tent. They’re bowed and they flex. Their load rating isn’t great enough. But a lot of folks use aftermarket crossbars like Thule, LFD, or Yakima on the OEM side rails.
You can search for threads on the subject. Here’s one:

Final word on RTT on stock roof rails.

Load distribution over the four crossbars in a NiseRack configuration would be a better setup.

Last edited by ElectroBoy; 07-13-2020 at 04:52 AM.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 07-14-2020, 10:35 AM #41
carlodonz's Avatar
carlodonz carlodonz is offline
Member
 
Join Date: Sep 2018
Location: Denver, CO
Posts: 220
Real Name: Carlo
carlodonz will become famous soon enough
carlodonz carlodonz is offline
Member
carlodonz's Avatar
 
Join Date: Sep 2018
Location: Denver, CO
Posts: 220
Real Name: Carlo
carlodonz will become famous soon enough
I got an extra set of roof rails / caps if anyone needs them.
__________________
2014 4Runner Trail Super White
carlodonz is offline   Reply With QuoteReply With Quote
Old 07-14-2020, 05:33 PM #42
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Quote:
Originally Posted by carlodonz View Post
I got an extra set of roof rails / caps if anyone needs them.
Let's do some destructive testing WOOOHOOO!

I'll send you an IM and we can arrange how to get them shipped here.
Eitek1 is offline   Reply With QuoteReply With Quote
Old 07-14-2020, 07:01 PM #43
uh0h50 uh0h50 is offline
Member
 
Join Date: Mar 2019
Location: Bay Area, CA
Posts: 342
uh0h50 has a spectacular aura about uh0h50 has a spectacular aura about uh0h50 has a spectacular aura about
uh0h50 uh0h50 is offline
Member
 
Join Date: Mar 2019
Location: Bay Area, CA
Posts: 342
uh0h50 has a spectacular aura about uh0h50 has a spectacular aura about uh0h50 has a spectacular aura about
I've only had LFD Off Rack cross bars on stock rails And then switched to an entire LFD roof rack, so I can't really compare. But due to the design of these aluminum cross bars, do they retain water? If so, would there be any unforeseen issues? Perhaps I'm overthinking it.
__________________
lll 2016 SR5P MGM lll OEM TRD Pro Matte Black Wheels w/ Falken Wildpeak LT255/80 17 "Pizza Cutters" l Bilstein 5100 F+R set at 1.75F + 1" Cornfed Rear Spacers l OEM TRD F+R Lower Valances l Prinsu Non-Drill Full Length Roof Rack l Shrockworks Sliders l RCI Steel Skid Plate l OEM bi-LED Headlights l DD SS3 Sport Amber Fogs l
My 3rd Row Delete Thread
uh0h50 is offline   Reply With QuoteReply With Quote
Old 07-14-2020, 07:56 PM #44
sn_85's Avatar
sn_85 sn_85 is offline
Senior Member
 
Join Date: Dec 2013
Location: Boise, ID
Posts: 1,959
sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold
sn_85 sn_85 is offline
Senior Member
sn_85's Avatar
 
Join Date: Dec 2013
Location: Boise, ID
Posts: 1,959
sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold
Quote:
Originally Posted by uh0h50 View Post
I've only had LFD Off Rack cross bars on stock rails And then switched to an entire LFD roof rack, so I can't really compare. But due to the design of these aluminum cross bars, do they retain water? If so, would there be any unforeseen issues? Perhaps I'm overthinking it.
I had a Prinsu rack and K9 rack for a while. Both uses aluminum T-slot. They retain a little bit of water afterwards but it dries up pretty quickly on a warm sunny day. I wouldn't worry about it. Plus you're still using OEM side rails so there won't be any water intrusion.
__________________
2016 Nautical Blue Metallic Trail | SCS | Falken Wildpeak AT3/W | Icon CDCV | Heftyfab Front Bumper | 4x4 Labs Rear | Shrockworks Sliders | RCI Skids | Warn VR10S | OGE Dual Battery System | sPOD | Katzkin
2013 Blizzard Pearl LE 4WD - SOLD!!!
sn_85 is offline   Reply With QuoteReply With Quote
Old 07-14-2020, 08:45 PM #45
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Quote:
Originally Posted by uh0h50 View Post
I've only had LFD Off Rack cross bars on stock rails And then switched to an entire LFD roof rack, so I can't really compare. But due to the design of these aluminum cross bars, do they retain water? If so, would there be any unforeseen issues? Perhaps I'm overthinking it.
What SN_85 said is correct. They may retain a little water but it shouldn't cause any issues. If the water was to seep out at the end of the bar it would just run down the face of the bracket and drop harmlessly on your roof. It wouldn't even have access to the inner part of your roof rail (which is open to the weather anyway).

If corrosion was an issue I understand. The only part that could possibly rust is zinc phosphate coated and is made for this type of application. Everything else won't rust or corrode due to the properties of the material.

What was your concern specifically? Maybe I can answer that better.
Eitek1 is offline   Reply With QuoteReply With Quote
Reply

Tags
aluminum , crossbars , oem , rack , tnutz

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2nd Gen DIY 8020 Aluminum Roof Rack Dropzone Classic T4Rs 11 04-14-2021 11:24 AM
RPM Fabrication Aluminum Roof Rack neatoneto 5th gen T4Rs 24 11-13-2018 11:41 PM
Full length factory roof rail/Aluminum Roof Rack FreshSeabass 3rd gen T4Rs 2 09-06-2016 10:07 PM
Aluminum Roof Rack? J053619 4th Gen T4Rs 10 05-14-2014 12:01 AM
Aluminum roof rack ? Gstick Engines / Suspension / Wheels / Tires / Audio / Accessories 2 07-08-2010 03:43 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 12:31 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020