User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-28-2020, 10:13 PM #61
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
RTT just sits on the rack as pictured. 23Zero tents (and others, I assume) have a rail on the bottom that a bolt and bolt holder slide into. User slides in a bolt to the 'inside' if the crossbeam and one to the 'outside' of the crossbeam. A flat piece then is bolted to the bottom with 2 locking nuts. Sounds easy, and if you have lots of space under the tent (like I did with my last setup, with Yakima rack and bars) it goes pretty easy. The closer the rack is to the top of the truck, the more difficult it is to start the nut on the bottom. The NiseRack sits high enough that everything fits well, it is just a bit of a chore to get the 'inside' nut into place. Once on then getting it snug with a long ratchet wrench is pretty easy.
Attached Images
5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack-da9c1022-0463-4f8b-9e94-7662517370db-jpeg  5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack-387288dd-a726-40be-a17f-261dd9fb31f9-jpeg  5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack-e76aac46-f6b1-43aa-ab9d-efc7d5609b1a-jpeg  5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack-3e0151f5-7d81-41c0-8f4e-e511bda42761-jpeg  5th Gen Aluminum Roof Rack Using OEM Siderails: NiseRack-f976151d-33dc-4436-a985-c17489f0ccda-jpeg 
__________________
2015 T4R Trail Red, 3” lift, 285s, Niserack, HF rock sliders, BA bumper
2006 4runner sport, v6, Tacoma TRD springs front, airbags And 2” spacers in rear. 440k and still chuggin along.
1977 FJ40, V8, lifted, Warn 8274 winch etc.
2006 GX470, 285s, 2” lift, C4lo sliders
Jpilot is offline   Reply With QuoteReply With Quote
Old 07-29-2020, 12:18 AM #62
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by Jpilot View Post
RTT just sits on the rack as pictured. 23Zero tents (and others, I assume) have a rail on the bottom that a bolt and bolt holder slide into. User slides in a bolt to the 'inside' if the crossbeam and one to the 'outside' of the crossbeam. A flat piece then is bolted to the bottom with 2 locking nuts. Sounds easy, and if you have lots of space under the tent (like I did with my last setup, with Yakima rack and bars) it goes pretty easy. The closer the rack is to the top of the truck, the more difficult it is to start the nut on the bottom. The NiseRack sits high enough that everything fits well, it is just a bit of a chore to get the 'inside' nut into place. Once on then getting it snug with a long ratchet wrench is pretty easy.

Thanks for explaining that. It looks like a good sturdy setup. I’m not ready to buy a RTT yet but I’m thinking about one for the future. I presume you will keep yours mounted permanently.

Last edited by ElectroBoy; 07-29-2020 at 12:21 AM.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 08-05-2020, 04:10 PM #63
kaitlyn2004 kaitlyn2004 is offline
Member
 
Join Date: May 2020
Location: Vancouver, BC
Posts: 311
kaitlyn2004 will become famous soon enough
kaitlyn2004 kaitlyn2004 is offline
Member
 
Join Date: May 2020
Location: Vancouver, BC
Posts: 311
kaitlyn2004 will become famous soon enough
I noticed you can get black bars from tnutz - is there going to be an option for black brackets? Or would it all just scratch away in no time anyway (I don't know if their black is some basic coating or what)?

Also, am in Canada - tnutz charges a bunch for shipping here, and it's UPS and likely extra duty+brokerage. Anyone know a canadian source?
kaitlyn2004 is offline   Reply With QuoteReply With Quote
Old 08-05-2020, 07:30 PM #64
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by kaitlyn2004 View Post
I noticed you can get black bars from tnutz - is there going to be an option for black brackets? Or would it all just scratch away in no time anyway (I don't know if their black is some basic coating or what)?

Also, am in Canada - tnutz charges a bunch for shipping here, and it's UPS and likely extra duty+brokerage. Anyone know a canadian source?
I’m not familiar with any Canadian sources for extruded aluminum. My order from TNutz was perfectly cut to length and the price in the US was the least expensive. @Eitek1 did extensive research for sourcing parts so he would know of alternate suppliers.

Looking at the TNutz site, there’s an option for black anodized.
EX-1030-BLACK – 1″ x 3″ BLACK Smooth T-Slotted Aluminum Extrusion | TNUTZ

On the NiseRack site FAQ section there’s a description of DIY painting the brackets black to match:
Frequently Asked Questions | NiseRack.com

For shipping costs from US to Canada trying contacting TNutz directly. They should know the proper procedure. They may also have an affiliate in Canada.
Their phone number and email are here:
CONTACT | TNUTZ

For shipping the NiseRack brackets, contact Eitek1. You could compare shipping cost of UPS versus the USPS Priority International mail through their websites. I’m thinking USPS will be about $50 US.
Good luck, it will be worth the effort to research this. Let us know your results.

Last edited by ElectroBoy; 08-06-2020 at 01:11 AM.
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 09:49 AM #65
kjbenner kjbenner is offline
Member
 
Join Date: Nov 2018
Location: NE Ohio
Posts: 71
Real Name: Kevin
kjbenner is on a distinguished road
kjbenner kjbenner is offline
Member
 
Join Date: Nov 2018
Location: NE Ohio
Posts: 71
Real Name: Kevin
kjbenner is on a distinguished road
Hey @Eitek1 , any thoughts about adding reliefs above one or more of the mounting holes, to match the t-slots in the extrusion to allow for use of slide-in T-nuts?
__________________
2015 Trail Edition w/ KDSS
TRD forged wheels, Cooper AT3 4S (P265/70R17)
kjbenner is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 04:52 PM #66
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Quote:
Originally Posted by kjbenner View Post
Hey @Eitek1 , any thoughts about adding reliefs above one or more of the mounting holes, to match the t-slots in the extrusion to allow for use of slide-in T-nuts?
You’re pretty clever. I was looking at my design and had a ‘Doh Homer Simpson moment a few weeks ago. I should have caught that before. I actually have it designed already and my next batch will feature that.

I was going to have all 3 cutouts available. Due to the fact that when you do that there is only a very little bracket material above the screw, it would be possible to damage the bracket with enough upward force. I’m going to add the cutout to the center channel and you should be able to slide the fasteners right in. The risk of damage from upward force will be mitigated also.

Also, how is it that no one else has figured this out yet?

@ElectroBoy this was the change I was referring to LOL.
__________________
2017 SR5 4X4
SSO Rock Sliders
NiseRack Roof Rack
Eitek1 is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 05:04 PM #67
seatia seatia is offline
Member
 
Join Date: Dec 2019
Location: Ft Lauderdale
Posts: 181
seatia will become famous soon enough seatia will become famous soon enough
seatia seatia is offline
Member
 
Join Date: Dec 2019
Location: Ft Lauderdale
Posts: 181
seatia will become famous soon enough seatia will become famous soon enough
Quote:
Originally Posted by kaitlyn2004 View Post
I noticed you can get black bars from tnutz - is there going to be an option for black brackets? Or would it all just scratch away in no time anyway (I don't know if their black is some basic coating or what)?

Also, am in Canada - tnutz charges a bunch for shipping here, and it's UPS and likely extra duty+brokerage. Anyone know a canadian source?
Don't know about your area but around Buffalo there are American warehouses that accept shipments for Canadians. Canadians then cross the border, pickup the packages and are able to save a lot in brokerage fees etc crossing themselves.
seatia is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 05:15 PM #68
kaitlyn2004 kaitlyn2004 is offline
Member
 
Join Date: May 2020
Location: Vancouver, BC
Posts: 311
kaitlyn2004 will become famous soon enough
kaitlyn2004 kaitlyn2004 is offline
Member
 
Join Date: May 2020
Location: Vancouver, BC
Posts: 311
kaitlyn2004 will become famous soon enough
Quote:
Originally Posted by seatia View Post
Don't know about your area but around Buffalo there are American warehouses that accept shipments for Canadians. Canadians then cross the border, pickup the packages and are able to save a lot in brokerage fees etc crossing themselves.
Yep, and I normally do that... but the border is currently closed because of covid...
kaitlyn2004 is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 05:38 PM #69
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by Eitek1 View Post
You’re pretty clever. I was looking at my design and had a ‘Doh Homer Simpson moment a few weeks ago. I should have caught that before. I actually have it designed already and my next batch will feature that.

I was going to have all 3 cutouts available. Due to the fact that when you do that there is only a very little bracket material above the screw, it would be possible to damage the bracket with enough upward force. I’m going to add the cutout to the center channel and you should be able to slide the fasteners right in. The risk of damage from upward force will be mitigated also.

Also, how is it that no one else has figured this out yet?

@ElectroBoy this was the change I was referring to LOL.
Ha! I was thinking about that last night but more along the lines of hogging out material on the end of the bars. Maybe with a router bit.
How would you suggest we rework the existing brackets?
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 06:14 PM #70
seatia seatia is offline
Member
 
Join Date: Dec 2019
Location: Ft Lauderdale
Posts: 181
seatia will become famous soon enough seatia will become famous soon enough
seatia seatia is offline
Member
 
Join Date: Dec 2019
Location: Ft Lauderdale
Posts: 181
seatia will become famous soon enough seatia will become famous soon enough
Quote:
Originally Posted by kaitlyn2004 View Post
Yep, and I normally do that... but the border is currently closed because of covid...
All I know is not to use UPS.
Sent a package back in the 90s and UPS held it hostage for some crazy amount up there.
seatia is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 06:15 PM #71
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
@Jpilot I thought I'd be able to get past it but I just can't. That one odd color bolt holding your crossbar on is driving me nuts. Its making my OCD twitch LOL.

If it's still that way let me know what length you need and I'll send you a bolt for it.
__________________
2017 SR5 4X4
SSO Rock Sliders
NiseRack Roof Rack
Eitek1 is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 06:37 PM #72
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Quote:
Originally Posted by Eitek1 View Post
@Jpilot I thought I'd be able to get past it but I just can't. That one odd color bolt holding your crossbar on is driving me nuts. Its making my OCD twitch LOL.

If it's still that way let me know what length you need and I'll send you a bolt for it.
I had a good laugh there! Ok, I will go and get a new bolt for ya.
__________________
2015 T4R Trail Red, 3” lift, 285s, Niserack, HF rock sliders, BA bumper
2006 4runner sport, v6, Tacoma TRD springs front, airbags And 2” spacers in rear. 440k and still chuggin along.
1977 FJ40, V8, lifted, Warn 8274 winch etc.
2006 GX470, 285s, 2” lift, C4lo sliders
Jpilot is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 06:39 PM #73
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Jpilot Jpilot is offline
Member
 
Join Date: Nov 2019
Location: Lafayette, Co
Posts: 194
Real Name: Joe
Jpilot will become famous soon enough Jpilot will become famous soon enough
Oh, BTW, I just ordered an awning. I think we’re going to have to engineer a bracket for the awning when you get a chance.
__________________
2015 T4R Trail Red, 3” lift, 285s, Niserack, HF rock sliders, BA bumper
2006 4runner sport, v6, Tacoma TRD springs front, airbags And 2” spacers in rear. 440k and still chuggin along.
1977 FJ40, V8, lifted, Warn 8274 winch etc.
2006 GX470, 285s, 2” lift, C4lo sliders
Jpilot is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 08:37 PM #74
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Eitek1 Eitek1 is offline
Member
 
Join Date: Sep 2017
Location: New Orleans
Posts: 146
Eitek1 will become famous soon enough
Just give me the hole pattern on the awning and I'll take care of it.
__________________
2017 SR5 4X4
SSO Rock Sliders
NiseRack Roof Rack
Eitek1 is offline   Reply With QuoteReply With Quote
Old 08-10-2020, 09:28 PM #75
kjbenner kjbenner is offline
Member
 
Join Date: Nov 2018
Location: NE Ohio
Posts: 71
Real Name: Kevin
kjbenner is on a distinguished road
kjbenner kjbenner is offline
Member
 
Join Date: Nov 2018
Location: NE Ohio
Posts: 71
Real Name: Kevin
kjbenner is on a distinguished road
Quote:
Originally Posted by Eitek1 View Post
You’re pretty clever. I was looking at my design and had a ‘Doh Homer Simpson moment a few weeks ago. I should have caught that before. I actually have it designed already and my next batch will feature that.

I was going to have all 3 cutouts available. Due to the fact that when you do that there is only a very little bracket material above the screw, it would be possible to damage the bracket with enough upward force. I’m going to add the cutout to the center channel and you should be able to slide the fasteners right in. The risk of damage from upward force will be mitigated also.

Also, how is it that no one else has figured this out yet?

@ElectroBoy this was the change I was referring to LOL.
Haha, I've built a lot of stuff out of 80/20, and I don't think I've ever managed to get all my slide-in connectors inserted without having to disassemble part of my project after forgetting them! The roll-in connectors solve the problem most of the time but some of the special connectors have to slide in.

FWIW, if you put the one cutout on either the left or right side, you'd have access to the front slot from one side of the rig, and access to the back from the other, although perhaps the desire for symmetry outweighs having access to two slots.

This is a great design BTW, I've been window shopping rack solutions for a while and this is looking like it might be the best fit for my needs.
__________________
2015 Trail Edition w/ KDSS
TRD forged wheels, Cooper AT3 4S (P265/70R17)
kjbenner is offline   Reply With QuoteReply With Quote
Reply

Tags
aluminum , crossbars , oem , rack , tnutz

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2nd Gen DIY 8020 Aluminum Roof Rack Dropzone Classic T4Rs 11 04-14-2021 11:24 AM
RPM Fabrication Aluminum Roof Rack neatoneto 5th gen T4Rs 24 11-13-2018 11:41 PM
Full length factory roof rail/Aluminum Roof Rack FreshSeabass 3rd gen T4Rs 2 09-06-2016 10:07 PM
Aluminum Roof Rack? J053619 4th Gen T4Rs 10 05-14-2014 12:01 AM
Aluminum roof rack ? Gstick Engines / Suspension / Wheels / Tires / Audio / Accessories 2 07-08-2010 03:43 AM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:49 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020