User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 08-11-2020, 01:09 PM #1
Aham182 Aham182 is offline
Junior Member
 
Join Date: May 2020
Location: Baltimore
Posts: 15
Aham182 is on a distinguished road
Aham182 Aham182 is offline
Junior Member
 
Join Date: May 2020
Location: Baltimore
Posts: 15
Aham182 is on a distinguished road
Raptor lights problems and misfunction

So I installed raptor lights and followed instructions on all YouTube vids saying to put the add a fuse in the INJ slot. The runner and the raptor lights were working perfectly fine for alittle over a week. Then yesterday I was driving down the highway and the truck lost power steering and completely shut off while I was going 65 mpg and had to cross lanes and pull over. Check engine light was on and trac off lights were on. Tried to start it and it would start for a second then shut off again. Tried again and it wouldn’t even start. Got it towed to the dealership and they ran the diagnostic and just called and said it was the afternarket lights causing the problem so they had to take it out of the fuse. The raptor lights are just for looks so I’m just gonna keep them off but sucks I paid 70 bucks for them and this happened. Has anyone else had this problem with the raptor lights or any solutions?
Aham182 is offline   Reply With QuoteReply With Quote
Old 08-11-2020, 11:14 PM #2
AMLOR AMLOR is offline
Member
 
Join Date: Aug 2019
Location: The Republic of Texas
Posts: 259
Real Name: Kirk
AMLOR has a spectacular aura about AMLOR has a spectacular aura about
AMLOR AMLOR is offline
Member
 
Join Date: Aug 2019
Location: The Republic of Texas
Posts: 259
Real Name: Kirk
AMLOR has a spectacular aura about AMLOR has a spectacular aura about
Quote:
Originally Posted by Aham182 View Post
So I installed raptor lights and followed instructions on all YouTube vids saying to put the add a fuse in the INJ slot. The runner and the raptor lights were working perfectly fine for alittle over a week. Then yesterday I was driving down the highway and the truck lost power steering and completely shut off while I was going 65 mpg and had to cross lanes and pull over. Check engine light was on and trac off lights were on. Tried to start it and it would start for a second then shut off again. Tried again and it wouldn’t even start. Got it towed to the dealership and they ran the diagnostic and just called and said it was the afternarket lights causing the problem so they had to take it out of the fuse. The raptor lights are just for looks so I’m just gonna keep them off but sucks I paid 70 bucks for them and this happened. Has anyone else had this problem with the raptor lights or any solutions?
Well, not exactly...I dont and wont have "raptor lights" on mine, but to each, his own...but I have an Add a Fuse in the IGN slot NOT the INJ.
I believe the INJ is the fuse for the fuel injection. IGN is the Ignition slot; the accessory activates when the key is turned.
Been working without issue for most of a year now.
I could be wrong here, but I dont think so...
AMLOR
__________________
REMEMBER: Birth control prevents Mini-vans...

2019 TRD PRO: Victory 4x4 Blitz bumper & sliders, Smittybilt 12K, Factor 55, Bubba Rope, Van Beest, C4 Fab, Power Tank, Xenon Depot, Cali Raised LED, ARB, SPC UCA's, Rad Rubber, REDARC, StrongBox, TRD Pro front coils, CE Auto Elect., Blue Sea, SDHQ/SP9100, Cornfed, RCI skids, BajaRack "basket", Revolution Gear 4.88's, Dobinsons 300lb over stock rear springs. DrawTight Class IV frame mounted hitch, Method Racing 703 Bead grip.
AMLOR is offline   Reply With QuoteReply With Quote
Old 08-11-2020, 11:24 PM #3
st723 st723 is offline
Junior Member
 
Join Date: Jan 2016
Location: Orlando, FL
Posts: 16
st723 is on a distinguished road
st723 st723 is offline
Junior Member
 
Join Date: Jan 2016
Location: Orlando, FL
Posts: 16
st723 is on a distinguished road
This might be a dumb suggestion but have you confirmed that your battery terminals are clean and making full contact?


Sent from my iPhone using Tapatalk
__________________
2016 Trail MGM - BFG KO2 275's - 5100's set at 2.5" - Rear Daystar 1.5" - Hefty Fabworks frame sliders

2010 SR5 MGM - sold
st723 is offline   Reply With QuoteReply With Quote
Old 08-12-2020, 12:04 AM #4
honda250xtitan honda250xtitan is offline
Senior Member
 
Join Date: Feb 2016
Location: phoenix
Posts: 2,290
honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of
honda250xtitan honda250xtitan is offline
Senior Member
 
Join Date: Feb 2016
Location: phoenix
Posts: 2,290
honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of honda250xtitan has much to be proud of
have you considered ripping them out and throwing them in the garbage where they belong?
__________________
2016 TE : Grocery Getter, 34/10.5R17 Toyo at3, Prinsu Rack, King Coilovers, DuroBumps, ToyTec HD 2.0 springs, King shocks, King hydro bumps, Total Chaos mounts, DirtKing Fabrication UCA, VIVID RACING Tune, URD Y pipe, RCI skids, Marlin Crawler gussets, DRKDSS everything
honda250xtitan is offline   Reply With QuoteReply With Quote
Old 08-12-2020, 12:21 AM #5
mlnhtrang's Avatar
mlnhtrang mlnhtrang is offline
Member
 
Join Date: Dec 2017
Location: Bay Area, CA
Posts: 150
mlnhtrang is on a distinguished road
mlnhtrang mlnhtrang is offline
Member
mlnhtrang's Avatar
 
Join Date: Dec 2017
Location: Bay Area, CA
Posts: 150
mlnhtrang is on a distinguished road
user error. havent heard anyone have any issues. this is the first for me.
__________________
2018 T4R TRD Off-Road Premium w/ KDSS - Super White
mlnhtrang is offline   Reply With QuoteReply With Quote
Old 08-12-2020, 01:35 AM #6
sn_85's Avatar
sn_85 sn_85 is offline
Senior Member
 
Join Date: Dec 2013
Location: Boise, ID
Posts: 1,959
sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold
sn_85 sn_85 is offline
Senior Member
sn_85's Avatar
 
Join Date: Dec 2013
Location: Boise, ID
Posts: 1,959
sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold sn_85 is a splendid one to behold
Quote:
Originally Posted by honda250xtitan View Post
have you considered ripping them out and throwing them in the garbage where they belong?
What do you mean? They add at least 10 overland style points and you are sure to get a few head nods while driving.
__________________
2016 Nautical Blue Metallic Trail | SCS | Falken Wildpeak AT3/W | Icon CDCV | Heftyfab Front Bumper | 4x4 Labs Rear | Shrockworks Sliders | RCI Skids | Warn VR10S | OGE Dual Battery System | sPOD | Katzkin
2013 Blizzard Pearl LE 4WD - SOLD!!!
sn_85 is offline   Reply With QuoteReply With Quote
Old 10-17-2020, 03:41 PM #7
mcm mcm is offline
Junior Member
 
Join Date: May 2010
Location: Las Vegas, NV
Posts: 28
mcm is on a distinguished road
mcm mcm is offline
Junior Member
 
Join Date: May 2010
Location: Las Vegas, NV
Posts: 28
mcm is on a distinguished road
I just installed raptor lights on my 2015 trd pro. Placed the red wire as directed to the Inj fuse. Vehicle won't start. After troubleshooting it for awhile I Installed the red wire to the headlight fuse which is marked 10amp which is 2 fuses above the inj fuse. Now it works when the headlights are on.
mcm is offline   Reply With QuoteReply With Quote
Old 04-08-2021, 08:01 PM #8
blackbearry blackbearry is offline
Junior Member
 
Join Date: Apr 2021
Posts: 23
blackbearry is on a distinguished road
blackbearry blackbearry is offline
Junior Member
 
Join Date: Apr 2021
Posts: 23
blackbearry is on a distinguished road
Question

Hi everyone,

I’m new to the 4Runner family. Have a 2021 TRD Pro.

I wanted to add smoked amber raptor lights but I’m not electrically savvy.

1) I want the ability to turn the lights off but without having to install a relay. Is it possible to link the Raptor lights to DRL and Headlights? That way when I have either my DRL, Low Beam or High Beams on, the raptor lights are on? And when I have the DRL off (and lo and high beams) the raptor lights are off?

2) I see that if I add a fuse to the cabin fuse box, the fuse cover won’t fit. Is there another fuse cover that is 3rd party that could allow the fuse box to be covered with the added fuse?

3) I’m also in the works of installing Thinkware U1000 front and rear dash cam via OBD2 power cable instead of hardwiring it in. Where do you guys recommend the excess cables for the front and rear cams be tied up and hidden? I had seen the side of the dash on some other cars being popped open and those going in there. Is that possible on the 4Runner too or is there a better spot?
blackbearry is offline   Reply With QuoteReply With Quote
Old 04-09-2021, 10:48 AM #9
WhiteMudhorn WhiteMudhorn is offline
Member
 
Join Date: Mar 2021
Location: TX
Posts: 62
WhiteMudhorn is on a distinguished road
WhiteMudhorn WhiteMudhorn is offline
Member
 
Join Date: Mar 2021
Location: TX
Posts: 62
WhiteMudhorn is on a distinguished road
Quote:
Originally Posted by blackbearry View Post
Hi everyone,

I’m new to the 4Runner family. Have a 2021 TRD Pro.

I wanted to add smoked amber raptor lights but I’m not electrically savvy.

1) I want the ability to turn the lights off but without having to install a relay. Is it possible to link the Raptor lights to DRL and Headlights? That way when I have either my DRL, Low Beam or High Beams on, the raptor lights are on? And when I have the DRL off (and lo and high beams) the raptor lights are off?

2) I see that if I add a fuse to the cabin fuse box, the fuse cover won’t fit. Is there another fuse cover that is 3rd party that could allow the fuse box to be covered with the added fuse?

3) I’m also in the works of installing Thinkware U1000 front and rear dash cam via OBD2 power cable instead of hardwiring it in. Where do you guys recommend the excess cables for the front and rear cams be tied up and hidden? I had seen the side of the dash on some other cars being popped open and those going in there. Is that possible on the 4Runner too or is there a better spot?

1) It would be easy to do Either DRL or Low beam but both would need more relay/circuit work.

2) I don't think there exists an aftermarket fuse cover that allows additional fuse heights to be added. Apparently false... see post below

3) there was a couple of threads of someone installing front & rear dash cams I think you could get wiring ideas from those.

Last edited by WhiteMudhorn; 04-12-2021 at 10:33 AM.
WhiteMudhorn is offline   Reply With QuoteReply With Quote
Old 04-09-2021, 03:01 PM #10
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
ElectroBoy ElectroBoy is offline
Banned
 
Join Date: Nov 2017
Location: Bay Area, CA
Posts: 2,247
Real Name: Mark
ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future ElectroBoy has a brilliant future
Quote:
Originally Posted by blackbearry View Post
Hi everyone,

I’m new to the 4Runner family. Have a 2021 TRD Pro.

I wanted to add smoked amber raptor lights but I’m not electrically savvy.

1) I want the ability to turn the lights off but without having to install a relay. Is it possible to link the Raptor lights to DRL and Headlights? That way when I have either my DRL, Low Beam or High Beams on, the raptor lights are on? And when I have the DRL off (and lo and high beams) the raptor lights are off?

2) I see that if I add a fuse to the cabin fuse box, the fuse cover won’t fit. Is there another fuse cover that is 3rd party that could allow the fuse box to be covered with the added fuse?

3) I’m also in the works of installing Thinkware U1000 front and rear dash cam via OBD2 power cable instead of hardwiring it in. Where do you guys recommend the excess cables for the front and rear cams be tied up and hidden? I had seen the side of the dash on some other cars being popped open and those going in there. Is that possible on the 4Runner too or is there a better spot?
There are extended fuse box covers that fit over add-a-fuse modules. (There are two different add-a-fuse versions that will fit in the fuse positions, the low-profile ones work best).
Here’s a thread with links to eBay, Etsy.
Contact the Etsy vendor, and T4R member @ihateu3 , to make you one for a 20+ model year 4Runner.
Extended Fuse Box Cover?

Note that the 14-19 model years are different fuse box configurations than the 20+.
If you have a 14-19 4Runner the MESO version will work.
Extended Fuse Cover - 4Runner - Limited Runs



– MESO CUSTOMS LLC
ElectroBoy is offline   Reply With QuoteReply With Quote
Old 04-11-2021, 05:16 PM #11
blackbearry blackbearry is offline
Junior Member
 
Join Date: Apr 2021
Posts: 23
blackbearry is on a distinguished road
blackbearry blackbearry is offline
Junior Member
 
Join Date: Apr 2021
Posts: 23
blackbearry is on a distinguished road
Quote:
Originally Posted by ElectroBoy View Post
There are extended fuse box covers that fit over add-a-fuse modules. (There are two different add-a-fuse versions that will fit in the fuse positions, the low-profile ones work best).
Here’s a thread with links to eBay, Etsy.
Contact the Etsy vendor, and T4R member @ihateu3 , to make you one for a 20+ model year 4Runner.
Extended Fuse Box Cover?

Note that the 14-19 model years are different fuse box configurations than the 20+.
If you have a 14-19 4Runner the MESO version will work.
Extended Fuse Cover - 4Runner - Limited Runs



– MESO CUSTOMS LLC

Thanks so much!


Sent from my iPhone using Tapatalk
blackbearry is offline   Reply With QuoteReply With Quote
Old 04-30-2021, 01:35 PM #12
InspectorPro InspectorPro is offline
Junior Member
 
Join Date: Nov 2019
Location: Tri-Cities, TN
Posts: 4
Real Name: KC
InspectorPro is on a distinguished road
InspectorPro InspectorPro is offline
Junior Member
 
Join Date: Nov 2019
Location: Tri-Cities, TN
Posts: 4
Real Name: KC
InspectorPro is on a distinguished road
I can't post a new thread as I'm a newb, so sorry to hijack. I'm adding raptor lights today and alteady have my alpharex drl's wired to the inj fuse. With the same add a fuse supplied with the raptor lights I assume I should use the ign fuse. Any ideas?

Can't wait to be able to post some pics of my ride.
__________________
2018 SR5 Premium - 3" Toytec Lift - 285/70/17 Toyo Open Country's - 17X8 Moto Metal Wheels - More to Come
InspectorPro is offline   Reply With QuoteReply With Quote
Old 04-30-2021, 01:55 PM #13
osugsxr osugsxr is offline
Senior Member
 
Join Date: Aug 2017
Location: Ohio
Posts: 1,047
osugsxr is a jewel in the rough osugsxr is a jewel in the rough osugsxr is a jewel in the rough osugsxr is a jewel in the rough
osugsxr osugsxr is offline
Senior Member
 
Join Date: Aug 2017
Location: Ohio
Posts: 1,047
osugsxr is a jewel in the rough osugsxr is a jewel in the rough osugsxr is a jewel in the rough osugsxr is a jewel in the rough
Quote:
Originally Posted by sn_85 View Post
What do you mean? They add at least 10 overland style points and you are sure to get a few head nods while driving.
no over style points , just more horsepower.
osugsxr is offline   Reply With QuoteReply With Quote
Old 05-06-2021, 10:33 PM #14
YellowSnow YellowSnow is offline
Banned
 
Join Date: Nov 2018
Posts: 693
YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough
YellowSnow YellowSnow is offline
Banned
 
Join Date: Nov 2018
Posts: 693
YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough YellowSnow is a jewel in the rough
I still to this day don’t understand the appeal of wanting copy cat Ford lights on a Toyota 4 Runner. They serve absolutely no purpose, and I’ve read numerous reports of people having problems with broken wires, fuse problems, broken lights etc. after spending $90 for cheap ass Chinese led’s that cost $10 to make.
YellowSnow is offline   Reply With QuoteReply With Quote
Old 05-06-2021, 10:55 PM #15
fourrunnerbill fourrunnerbill is offline
Member
 
Join Date: Mar 2021
Location: So Cal
Posts: 93
fourrunnerbill is on a distinguished road
fourrunnerbill fourrunnerbill is offline
Member
 
Join Date: Mar 2021
Location: So Cal
Posts: 93
fourrunnerbill is on a distinguished road
I believe the proper way to add these lights is to use a tap a fuse or add a fuse so it does not draw power from any existing circuit. My raptor LED's came with one of those and has been working fine for a couple months no problem. But I'm considering removing them now anyway. Not as excited about these as I once was. The tap a fuse does stick out further so I couldn't put the fuse cover back on-one reason I don't like it now.
fourrunnerbill is offline   Reply With QuoteReply With Quote
Reply

Tags
lights , problem , raptor , shut , start

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Wiring raptor lights to button? BADCLOWN 5th gen T4Rs 60 03-27-2021 09:56 AM
Has Anyone Tried These Raptor Lights? zw470 5th gen T4Rs 120 11-13-2020 11:52 PM
Raptor lights!! Lets see them! Zeke588 4th Gen T4Rs 5 03-08-2019 02:34 PM
Raptor grill clearance lights ECRunner 4th Gen T4Rs 15 04-24-2013 08:59 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 02:25 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020