Here is some info for the people at Eibach. They advertise that their 2.0 Coilovers are 0 - 2 1/2”
I, and it seems others have found this information to be incorrect for our applications. EI: 2010 -2021
4Runners 4X4
Maybe
@
mark@eibach
and or
@
Ryan at Eibach
will carry this information forward or reach back out to the community for more information.
They DO NOT leave Eibach at a setting to achieve a level setting with OEM rear coils.
Factory setting from Eibach achieved a 3 1/2” increase in height on my truck after the truck was settled down and lower mount tightened after all the weight was on the coils.
Ground to top of wheel well (OEM) before install was 34 1/2”
Ground to top of wheel well 361/2” high after dropping adjustable collar down by 1”
(The 1” on the collar = 1 1/2” reduction of height.)
There is only 1/4” of threads left of adjustment on the shock shaft, hence there is
no way I could drop the height to OEM height with the coilovers.
You can see from the photos the differences and what it takes to achieve only a 2" height adjustment:
Eibach & Tokico OAL
Eibach & Tokico bottom of coil to center mount
Eibach & Tokico adjustment collar to top of lower mount collar
Eibach threads under adjustment collar before & after
Now the good part:
As far as the overall performance of the coilovers & shocks in a short period of evaluation time driving over the same areas, these coilovers dampen the harshness of highway bumps and depressions extremely well compared to the Tokico OEM equipment that comes on the 4Runner.
Nose dive is reduced tremendously, cornering feels more controlled with less body roll.
So far I am very pleased.