Quote:
Originally Posted by Mudhorn
I liked these dual fog/driving lights. But wanted amber as well so I upgraded to the Diode Dynamics SS3. Thought about just using film.
The bad thing about the Auer is you cannot plug and play other brands (might be a way to make it work but I found it easier to just wire them after hours of trying while on the phone with Diode, which is an awesome company). The fogs will have 2 outputs (compared to 1 that is standard) that run into a small silver control box you will find under the steering wheel. Wires from that box tap into different things to auto-switch from fog to driving light based on headlight selection.
|
Was thinking of keeping that crap in place if I go a diff route and maybe run the normal fogs of the standrd fog switch plug and then maybe some amber fogs off the DRL switch plug. Would have to test the output volts on both plugs.
Baja Designs or some multiple led light company could give that option to all.. But I am sure it would be a board rewire on the light and not a popular option.
Just looking at the different output ratings on all available options. Some big variations in ratings.