Quote:
Originally Posted by Vermonster76
Over the weekend my neighbor and I installed a Fox 2.5 DSC suspension front and rear with Eibach 1in springs and Icon DJ UCA’s.
There’s a total of 2.5in lift in the front and according to Acutune with that amount and the 1in springs it would be level.
So here’s my question, the front is noticeably higher than the rear. Does it need to settle after a few weeks or should we get back in there and adjust height.
Thanks!
|
so I’m guessing you didn’t change the rear springs or add any spacer. Did you measure the fronts and rears before and after addingthe front coil overs ?
Normally stock height is 20” fronts and 22” rears. So if you added 2.5” Coilovers, you should be at 22.5. That should make the fronts leveled with the rears. Usually 1/2” (22.5”) extra is needed to make it level to the rears.
Let’s see some side profiles