User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-27-2021, 05:39 PM #1
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
Dash Speaker Question - 2019 TRD Pro w/ JBL

I am replacing the stock tweeters w/ 3.5" since one of my tweeters are blown.

I have looked through all of the write ups and still have a question since my wiring seems a bit different (see pictures).

Goes to Tweeter
Yellow = +
Purple = -
Goes to Front Door
Green = +
Black = -

I have a capacitor on the positive lead for the wire that goes to the front door (green).

How should this be wired? Do I cutoff the green wire w/ capacitor since it's jumpered anyway? And cut the black? Not the jumpers.
Attached Images
Dash Speaker Question - 2019 TRD Pro w/ JBL-img_20210427_135613-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-img_20210427_135625-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-img_20210427_140042-jpg 
fx3s is offline   Reply With QuoteReply With Quote
Old 04-27-2021, 08:03 PM #2
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
I ended up wiring it purple and black together for -

and capped the green. then i soldered the bass blocker inline w/ the yellow wire.

see pictures of the wiring harness to speaker.
Attached Images
Dash Speaker Question - 2019 TRD Pro w/ JBL-wiring-1-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-l-speaker-jpg 
fx3s is offline   Reply With QuoteReply With Quote
Old 04-27-2021, 08:07 PM #3
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
I taped some spacers together with electric tape since I had to match the elevation to mount it. also got 2 inch mending plates from home depot and bored out the holes a bit.

https://www.homedepot.com/p/Everbilt...5299/202033910

Used 80 grit sandpaper to grind down the speaker covers and put everything back together
Attached Images
Dash Speaker Question - 2019 TRD Pro w/ JBL-spacers-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-speaker-installed-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-r-speaker-jpg  Dash Speaker Question - 2019 TRD Pro w/ JBL-speaker-cover-jpg 
fx3s is offline   Reply With QuoteReply With Quote
Old 04-27-2021, 10:01 PM #4
fkheath fkheath is offline
Member
 
Join Date: Sep 2020
Location: Utah
Posts: 541
fkheath is a jewel in the rough fkheath is a jewel in the rough fkheath is a jewel in the rough
fkheath fkheath is offline
Member
 
Join Date: Sep 2020
Location: Utah
Posts: 541
fkheath is a jewel in the rough fkheath is a jewel in the rough fkheath is a jewel in the rough
Quote:
Originally Posted by fx3s View Post
I am replacing the stock tweeters w/ 3.5" since one of my tweeters are blown.

I have looked through all of the write ups and still have a question since my wiring seems a bit different (see pictures).

Goes to Tweeter
Yellow = +
Purple = -
Goes to Front Door
Green = +
Black = -

I have a capacitor on the positive lead for the wire that goes to the front door (green).

How should this be wired? Do I cutoff the green wire w/ capacitor since it's jumpered anyway? And cut the black? Not the jumpers.
Why not get OEM Audio Plus speakers? (4runner - OEM Audio Plus)

They are plug and play, i.e. no wiring modifications needed.
fkheath is offline   Reply With QuoteReply With Quote
Old 04-28-2021, 12:58 AM #5
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
Quote:
Originally Posted by fkheath View Post
Why not get OEM Audio Plus speakers? (4runner - OEM Audio Plus)



They are plug and play, i.e. no wiring modifications needed.
I have a setup in mind for my 4runner that includes all JL Audio.

Always liked the brand/quality so oemaudio+ never really crossed my mind.

I could have bought the wiring harness from taco tunes and a 3d printed mount, to make it plug and play also but timing played a role...need the highs for work calls.

might change out the 3.5's with tweeters once the components come in.

Sent from my Pixel XL using Tapatalk
fx3s is offline   Reply With QuoteReply With Quote
Old 04-28-2021, 01:16 PM #6
DMurder DMurder is offline
Junior Member
 
Join Date: Apr 2021
Location: Appalachia USA
Posts: 13
Real Name: D
DMurder is on a distinguished road
DMurder DMurder is offline
Junior Member
 
Join Date: Apr 2021
Location: Appalachia USA
Posts: 13
Real Name: D
DMurder is on a distinguished road
Talking

I just installed some JBL 329s in the dash and if you look at the connector coming from the amp, it only has 2 wires, one + and one -. The jumper wire you see along with the 2 wires coming out to the speaker has one set for the mid, and one set with an inline capacitor for the tweeter. You need just the 2 for the mid.

I initially installed the capacitor that JBL provided, but the sound was very quiet and it made a popping noise on startup. I removed the capacitor and the volume increased, the pop went away, and no distortion at Max volume (I listen to gangster rap).

I didn’t want to destroy my factory speakers, so I used the Taco Tunes harness (they do not have a JBL specific harness listed for the 4Runmer). 3D printed the brackets (thank you member on this site that posted the STL files!) and reused the factory bolts.

I did this mod, because I have blown the dash speakers 2x under warranty, fried the amp, and blew the subwoofer. This JBL system has done pretty horrible. Now that I am out of warranty (still only 29k miles on it), I have no choice but to upgrade to prevent a gap in music while I drive. So, I am in the process of full upgrade.

I was going to start a new thread but 15 posts is a lot!
Attached Images
Dash Speaker Question - 2019 TRD Pro w/ JBL-dfebeeae-d228-47dd-9af6-b156b6ac156a-jpeg  Dash Speaker Question - 2019 TRD Pro w/ JBL-40ea6b49-7182-4ea5-ac5e-ea3cfd29a763-jpeg  Dash Speaker Question - 2019 TRD Pro w/ JBL-191bc1e5-6a42-43d4-9bd0-c87297b0c939-jpeg  Dash Speaker Question - 2019 TRD Pro w/ JBL-eee92906-ca9b-4371-a862-7f94e14b8c0f-jpeg  Dash Speaker Question - 2019 TRD Pro w/ JBL-f4849a4a-2f1f-4b08-b891-ac01cdf03f3a-jpeg 
__________________
2018 Limited Nautical Blue/Redwood
TRD CAI

Last edited by DMurder; 04-28-2021 at 02:29 PM.
DMurder is offline   Reply With QuoteReply With Quote
Old 04-28-2021, 06:43 PM #7
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
fx3s fx3s is offline
Member
 
Join Date: Jul 2010
Location: NNJ
Posts: 44
fx3s is on a distinguished road
Initially I joined the 2 + with the oem capacitor to the speaker but it was quiet as you mentioned. After that I decided to just cap the green wire (+) and us the yellow (+) to the dash speaker ...now dash and door work work fine.

I'm not happy my speakers blew, but am excited about the speakers I'm putting in.

Keep us updated on the progress!

Sent from my Pixel XL using Tapatalk
fx3s is offline   Reply With QuoteReply With Quote
Reply

Tags
black , capacitor , door , green , tweeters

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Has anything changed in the speaker department on the 2019 TRD OR? Signal Engines / Suspension / Wheels / Tires / Audio / Accessories 4 08-07-2020 07:08 AM
JBL system speaker mode (2019 TRD Pro) chips Engines / Suspension / Wheels / Tires / Audio / Accessories 1 05-26-2019 01:37 AM
Has anyone replaced the speaker in the dash? colleen3649 4th Gen T4Rs 24 03-13-2019 09:22 AM
Dash Speaker Help honda99ex 5th gen T4Rs 2 04-19-2017 06:53 AM
Dash Speaker question CartersYota Engines / Suspension / Wheels / Tires / Audio / Accessories 1 04-15-2011 10:04 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 09:26 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2021 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020