Quote:
Originally Posted by fkheath
Look in your owners manual under "Customizable Features". Most Toyotas have a "light sensor sensitivity" customizable feature.
|
I don't think this would affect the automatic high beams since they use the safety sense sensors.
However, page 233 does state:
Temporarily lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered.
Turn the engine switch off while the following conditions are met.
The headlight switch is in or .
The headlight switch lever is in the high beam position.
Automatic High Beam switch is on.
Turn the engine switch to the ON position (vehicles without a smart key
system) or IGNITION ON mode (vehicles with a smart key system).
Within 60 seconds after , repeat pulling the headlight switch lever to the
original position then pushing it to the high beam position quickly 10 times,
then leave the lever in the high beam position.
If the sensitivity is changed, the Automatic High Beam indicator will turn on
and off 3 times.
Automatic High Beam (headlights) may turn on even when the vehicle is
stopped.