Iconic Fabrication makes a number of products for the FJ and one of them, rear recovery points will bolt on the 4R so I've ordered a set of those.
They were originally sold through a now closed group buy thread on this forum.

Their other product is a great bracket for a FJ's transmission cooler which can also be purchased with a Hayden 678 or 698 cooler install kit.



FJ Cruiser Transmission Cooler Bracket Kit
– Iconic Fabrication

I asked the owner, Devon about a chance for a 5th Gen kit and all he needs is a volunteer or two to allow him to first measure up their 4R in the radiator area and then come back a month later for a fit check.

The reason I said a volunteer or two is because I don't know if there are any changes from 2010 - 2023 radiator mounting that might affect the location of holes or fitment of the cooler. So maybe someone with a 2010 and someone with a 2020 or later model could volunteer? Devon is located in Salina, about 40 miles west of Junction City, Kansas.

All I get out of this is Devon having a new 5th Gen trans cooler kit in stock for me to order. Practically speaking, that might not be until summer.

You can contact Devon directly through his web page at
Contact
– Iconic Fabrication

I hadn't heard anything back from Devon so I emailed him. It turns out he didn't make anything for a 5th gen so I'll go back to hacking together my own brackets and buy a cooler and other parts.

Odd. He'd sell 10x the volume of 4Runner ...

Damn. Would have been nice not have those through radiator plastic tie downs.

It might be possible to buy Iconic's FJ bracket and modify it to bolt into a 5th Gen

Bummer I was hoping this would be made

Yes, even Devon said "....I think the 5th gen 4runner crowd will have a large demand."

Back in February things shared in email looked promising so I guess in the months in between then and now something changed.
I bought a pair of the rear shackle brackets from Devon and would have been happy to give him more business. He makes great stuff.

I still have the cooler I had on my 4th Gen. It's a Toyota OEM trans cooler that was on a V8 that was salvaged. It's not an easy bolt on to a 5th gen but I think I'll take a closer look at reusing it before I buy something that requires fabbing new brackets.

Otherwise I am back to scouring all of the relevant threads and cooler products to see which cooler to buy and find some aluminum to hacksaw, drill and file into a reasonably stiff and secure bracket.

Installed my cooler yesterday. It was definitely a pain getting your hands in tight spaces and routing hoses in the engine bay but totally doable. Definitely ran into issues with spacing and mounting etc since I have a winch in the way. I had to modify the mount a little bit. I'm going to monitor it to see if there's any issues with rubbing etc. I think later on I will totally reverse the whole cooler on the mount and give it more room, but that's down the road.

Sent from my Pixel 6a using Tapatalk

Ordered a bracket for my stock TRDORP, I have a hayden 678 sitting in my garage waiting to be installed... I will post pics once I have it in