Home Menu

Site Navigation


Toyota 4Runner Forum - Largest 4Runner Forum > > > 2010-2013 Trail Hardware Kit
User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 02-19-2024, 06:12 PM #1
dandelionlightning dandelionlightning is offline
Member
  
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
dandelionlightning dandelionlightning is offline
Member
 
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
2010-2013 Trail Hardware Kit
Does anyone know what the PN is for the pre-facelift trail (2010-2013) roof rack hardware install kit?

I think it might be PT278-35070HW? But the Amazon link doesn't seem to have the nub pieces, just screws and washers.
https://www.amazon.com/Genuine-Toyot...e%2C120&sr=1-1

I found this thread that references the FJ cruiser hardware kit, but again, only appear to see screws and washers.
Trail edition factory roof rack

I have a 2016 trail that I'm installing the pre facelift rack on but the hardware kit that came with it is quite beat up and I couldn't get a secure fit when I tried to install so think I need a new install kit.

Thanks in advance!
dandelionlightning is offline   Reply With QuoteReply With Quote
Old 02-19-2024, 08:47 PM #2
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
What nub pieces are you referencing? I used hardware kit PT27835130HW when I installed the trail rails on my '21 ORP.
__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Tooly is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 10:51 AM #3
dandelionlightning dandelionlightning is offline
Member
  
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
dandelionlightning dandelionlightning is offline
Member
 
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
Quote:
Originally Posted by Tooly View Post
What nub pieces are you referencing? I used hardware kit PT27835130HW when I installed the trail rails on my '21 ORP.
Awesome, you used that kit to install the pre-facelift trail rack? 2010-2013 rack on a 21 ORP? That is exactly what I needed, I have a 16 trail prem I'm trying to install on.

The piece(s) I was referring to are in this picture:
Attached Images
2010-2013 Trail Hardware Kit-4runner-rack-jpg 
dandelionlightning is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 11:49 AM #4
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
From what I remember I replaced those brackets with new ones though I didn't have to. Part # is 6318542020 and they're cheap.

This is what the rails look like on my ORP.
__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Tooly is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 12:57 PM #5
dandelionlightning dandelionlightning is offline
Member
  
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
dandelionlightning dandelionlightning is offline
Member
 
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
Looks great! Thanks so much. Okay I will order PT27835130HW and 4 brackets as well because they are cheap. No issues installing on your end? Did you follow instructions or anything?
dandelionlightning is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 03:10 PM #6
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
No it's pretty straight forward. I think I found the torque specs somewhere and followed those so as not to over/under tighten and also tightened them uniformly. The brackets are worth spending the extra few bucks on because new ones come with fresh gasket material on them that you won't be able to save from the old ones.

One thing to be mindful of is once you get the roof rack off, you will see two white "tubes" that stick up and the bolts go through at each attachment point. If you dislodge those and they fall into the vehicle, you'll have to drop the headliner to get them and reposition them.
__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Last edited by Tooly; 02-21-2024 at 03:18 PM.
Tooly is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 04:25 PM #7
dandelionlightning dandelionlightning is offline
Member
  
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
dandelionlightning dandelionlightning is offline
Member
 
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
Thank you! two white tubes in all 4 places? Perhaps this was my issue when trying to make this work a while back w/ old hardware. I couldn't get a solid fit
dandelionlightning is offline   Reply With QuoteReply With Quote
Old 02-21-2024, 07:45 PM #8
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
The 2 white pieces circled. If those get pushed downward too far you have to pull down the headliner to get to them.

__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Tooly is offline   Reply With QuoteReply With Quote
Old 02-22-2024, 05:11 PM #9
dandelionlightning dandelionlightning is offline
Member
  
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
dandelionlightning dandelionlightning is offline
Member
 
Join Date: Aug 2023
Posts: 53
dandelionlightning is on a distinguished road
Quote:
Originally Posted by Tooly View Post
The 2 white pieces circled. If those get pushed downward too far you have to pull down the headliner to get to them.
Ahh, that may have been my issue previously. Can you clarify from that photo, is the outside of the vehicle on the bottom of the photo? I was also struggling w/ how the black brackets fit into their respective spots. Flipping them upside down and turning them back and forth trying to get a good fit w/ little success.
dandelionlightning is offline   Reply With QuoteReply With Quote
Old 02-22-2024, 05:21 PM #10
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
The bottom of the picture is the door side and the top of the picture the roof I guess you could say
__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Tooly is offline   Reply With QuoteReply With Quote
Old 02-22-2024, 07:45 PM #11
Firesq14's Avatar
Firesq14 Firesq14 is offline
Member
  
Join Date: Jan 2018
Location: Massachusetts
Posts: 209
Firesq14 will become famous soon enough
Firesq14 Firesq14 is offline
Member
Firesq14's Avatar
 
Join Date: Jan 2018
Location: Massachusetts
Posts: 209
Firesq14 will become famous soon enough
Big question
Here is the big question.
I was going to add another set of cross bars to my trail rack (11). Ordered the bars, went to install and the hardware did not come with the bars. The directions show that it is parts of the bars. Went back to the dealership and show them the problem. A few days later, after checking a couple of other packages and calling other dealers, Toyota apparently removed the hardware that slides into the rails,nuthatch the cross bars attach to. The dealership said perhaps that hardware is now packaged with the rails.

So the big question is, has anyone had to replace that hardware, have a part number or now where to purchase it.
__________________
Shakira, 2011 Salsa red pearl trail clone.
Firesq14 is offline   Reply With QuoteReply With Quote
Old 02-22-2024, 09:36 PM #12
Tooly Tooly is offline
Member
  
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Tooly Tooly is offline
Member
 
Join Date: Jan 2021
Location: BC, Canada
Posts: 60
Tooly is on a distinguished road
Quote:
Originally Posted by Firesq14 View Post
Here is the big question.
I was going to add another set of cross bars to my trail rack (11). Ordered the bars, went to install and the hardware did not come with the bars. The directions show that it is parts of the bars. Went back to the dealership and show them the problem. A few days later, after checking a couple of other packages and calling other dealers, Toyota apparently removed the hardware that slides into the rails,nuthatch the cross bars attach to. The dealership said perhaps that hardware is now packaged with the rails.

So the big question is, has anyone had to replace that hardware, have a part number or now where to purchase it.
The part number for the "H" brackets that slide into the rails and then the crossbars attach to doesn't exist or has never been found. The trail rails were a port installed option and the brackets came with them. Your only hope that I know of is finding someone who has the spare "H" brackets or if you're really crafty you could 3D print them I guess.

__________________
2021 4Runner ORP - Canada Spec
1989 Land Cruiser BJ74 - Sold
1986 Land Cruiser BJ70 - Rusted Away
Last edited by Tooly; 02-23-2024 at 12:38 PM.
Tooly is offline   Reply With QuoteReply With Quote
Reply

Tags
hardware , install , kit , trail , washers

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
2013 trail edition cross bar hardware? Firesq14 5th gen T4Rs 2 04-21-2020 12:45 PM
WTB 2010-2013 Trail PopsSmith For Sale: Vehicles 1 01-31-2015 03:45 PM
Fs n-fab nerf steps, 2010-2013 trail 2014 sr5/trail long beach, ca DLPG For Sale: T4R Items 0 05-04-2014 11:39 PM
2010 4Runner Trail Edition or 2013 FJ Trail Teams mideastbeast61 5th gen T4Rs 22 11-11-2012 03:31 PM

» Follow Us!!!
» Log in
User Name:

Password:

Not a member yet?
Register Now!
Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 01:08 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Toyota - 4Runner . org Forum Terms and Privacy Policy
Copyright © 2020