Locate the BCM to the left of the steering column. Find the 30-pin BCM connector (typically white in the middle.)
Make sure the ignition is off and carefully depress the tab and unplug the connector.
Make sure to line the connectors up straight and plug the Accessorides connector in place then plug the OEM BCM connector into the other end of the Accessorides harness. Be sure to plug the connector all the way in.
Locate the LED's on the top corners of the module.
Insert the key in the ignition and turn the ignition on without starting it.
The light on the module will turn solid RED and then solid green for 2 seconds and then go out. The bypass is programmed. Turn the key off and remove.
Unfortunately I wasn't fast enough to get a pic of the LEDs but it worked as advertised.
Re-insert key and start the vehicle. Let it run for 10-15 seconds to let the idle come to a normal level.
Press and hold the brake pedal. Without releasing the brake, press and release the push button on the side of the module once and then release the brake. The module LED will flash green and go out.
No further programming is necessary. Close all doors and hood. Now hit the lock button 3 times on your OEM key fob. The parking lights will flash and a few seconds later the truck will start and run.