Senior Member
|
|
Join Date: Dec 2015
Location: Colorado
Posts: 1,181
Real Name: Ron
|
|
Senior Member
Join Date: Dec 2015
Location: Colorado
Posts: 1,181
Real Name: Ron
|
Generally I have to stick a bottle jack in between the axle and the frame to push the axle down enough to get the spring out. The various bushings seem to resist axle droop enough that you can't push it down adequately by hand.
Just really watch the brake lines to make sure you don't over extend them.
Also, it usually helps to raise the opposite side of the axle while you're pushing down on the side you're working on.
__________________
2006 Sport Edition, V8, 206K miles, 2.5/1.5" OME lift, SPC adjustable UCA's, 255/75/17 BFG KO2's load range C @ 40psi. Regeared diffs to 4.30, with TrueTrac in rear.
1994 SR5, V6, 5-spd, Aussie locker front, Aisin manual hubs, Truetrac rear, 33/10.50/15 BFG KO's, stock suspension, OBA (Viair 400C), Front Range Offroad twin stick, 225K miles. Dual 2.28 transfer cases, for a 90:1 crawl ratio.
|