If we are able to demonstrate enough interest, Konig may consider developing more options for this wheel - larger diameter, wider, with less backspace and more negative offset. Looking for a show of hands. Please mention what diameter, width and offset you would be looking for.

The 5th gen has a very deep fenderwell with a lot of room to push this wheel for a fat 4.5-5" dish. Personally, I would like to see a 17 x 9 or 18 x 9 with 4" backspace/neg 25 offset which would push the wheel a smidge out of the top edge of the fender more aggressive than the pic below:

17 x 8 neg 10 offset with spacers sitting at fender depth: Adio3x's 5th gen



17 x 8 neg 10 offset without spacers sitting well within fender: SiRyan's 5th gen



Offset chart:

Good thread, and yes, you are correct, we have are able to have Konig make more aggressive fitments if have enough demand for those fitments.

However, in all fairness those photos have been taken at two different angles, and Ryan's 4Runner has the wheel turned inward in that photo. I don't want to turn people away from the 17x8" -10mm offset Countersteer Type X, because the offset is still equally aggressive or more aggressive than many of the wheels currently offered for the 5th Gen 4Runner.

We can and definitely will get something going for you guys who want a more aggressive fitment.