Definitely.

See below for a list of each light's LED type and Lumen rating.

Sorry for the late reply, I'm in Maine on business and haven't been at my computer all day.

ES Series TrekLight LED Light Bars
7 Inch TrekLight ES - 3W Epistar LED's - 2,500 Lumens
13 Inch TrekLight ES - 3W Epistar LED's - 4,500 Lumens
22 Inch TrekLight ES - 3W Epistar LED's - 7,500 Lumens
33 Inch TrekLight ES - 3W Epistar LED's - 11,250 Lumens
42 Inch TrekLight ES - 3W Epistar LED's - 15,000 Lumens


XT Series TrekLight LED Light Bars
4 Inch TrekLight XT - 3W CREE LED's - 1,600 Lumens
6.5 Inch TrekLight XT - 3W CREE LED's - 2,800 Lumens
9 Inch TrekLight XT - 3W CREE LED's - 4,500 Lumens
12 Inch TrekLight XT - 3W CREE LED's - 5,700 Lumens
18 Inch TrekLight XT - 3W CREE LED's - 8,600 Lumens
22 Inch TrekLight XT - 3W CREE LED's - 10,000 Lumens
36 Inch TrekLight XT - 3W CREE LED's - 18,500 Lumens


TrekPods
TrekPod OctaPlus (Round) - 3W Epistar LED's - 1,600 Lumens
TrekPod OctaPlus (Square) - 3W Epistar LED's - 1,600 Lumens
FloodPod - 3W Epistar LED's - 1,000 Lumens
TrekPod Mono XT - 10W CREE LED's - 900 Lumens
TrekPod 4x4 - 3W Epistar LED's - 2,800 Lumens
TrekPod Quad XT - 10W CREE LED's - 3,600 Lumens

@treklights

Troy,

How much amperage do your lights draw? I'm working on a wiring diagram to run the lights as I told you. Check out the thread below:
Electrical Guru's

Hey SV,

Funny you should ask, I had these hooked up to a tester the other day.

The 4" XT's were drawing just above 1 amp at 12 volts.

The 18" XT's I believe were right around 6 amps at 12 volts, but I'll have to double check, as I don't remember exactly.

Troy, are there plans in the future for any "combi" series lights? I'm interested in a flood/spot combination for a ATV.

You guys are quicker on the draw than I am today!

I blame it on the flu I'm currently nursing.

Starting today, all ES Series TrekLight bars are available in spot/flood combo beam.

Guys, you'll have to excuse my idiocy.

I was messing around with an XT Series TrekLight Bar today and found out that the mounting points DO in fact slide from side to side!

There's a little bit of play when the mounting points are on either end of the bars, so mounting to something slightly wider than the mounting range should take up the last of that slack.

Here is the mounting width range for the XT Series TrekLights:


4" TrekLight XT: One mounting point (can be moved all the way left or all the way right along the bar).

6.5" TrekLight XT: One mounting point (can be moved all the way left or all the way right along the bar).

9" TrekLight XT: One mounting point (can be moved all the way left or all the way right along the bar).

12" TrekLight XT: 1.5" apart to 8.75" apart

18" TrekLight XT: 1.5" apart to 14.75" apart

22" TrekLight XT: 1.5" apart to 18.75" apart

36" TrekLight XT: 1.5" apart to 32.75" apart

So how does that work? Is one half flood and one half spot?

More like 80/20.

The inner lights (80%) are spot, and the outer lights (20%) are flood.

Are they operated by the same switch where they both come on at the same time or is there some kind of dual control?

You may have changed my entire plan

This option is not showing on the web site yet.

By the way. There are some guys talking about your product on a Colorado FJ site. One of them saw the MUD group buy.

I have been sharring the info you give me. Is that worth a 25% discount?

Colorado FJ Cruiser enthusiasts

Sorry to throw the monkey wrench into your plan!

Same switch. The floods and spots do not operate separately. The only thing that's different is the shape of the reflectors.

PM Sent.

Low Beams:


ONE TrekPod Mono XT Spot Beam:

Some TrekLight eye candy:

18" TrekLight XT Spot Beam


Obligatory "Twin Trees" Shot


Into the sky. Notice how there's enough spread to shine a bright light onto the trees, while throwing a killer spot beam into the sky:




Into the Woods:

So, I'm thinking about opening the GB up a little early since the other one is already over.

What do you all think?

Anyone itching to reserve a light?