User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 04-13-2019, 05:11 PM #31
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
Quote:
Originally Posted by Ed_C View Post
Curious about CA smog checks:
- If they see CARB EO labels under the hood, will they actually cross-reference the numbers to verify they're for the vehicle?
- Will there be an issue if replacement cats that were originally welded were converted to flanges instead?
- If you cover the headers with OEM heat shields, will the inspectors take the time to actuality snoop around to verify there are OEM/OEM type manifolds under there?
If the smog tech is "by the book", they will cross-reference the EO #. If you model AND year does not match, you do not pass, it's happened before. Even if the EO # is for the same engine on a different model it will not pass. Now, not every tech is that thorough *wink wink*.

Welds vs flanges is fine though either way. It's common as an anti-theft device to weld on the cats with a sort of reinforcement to make it really hard to cut through. Back when metals prices spiked in 2011 cat thefts out here in California really skyrocketed. My cat was welded before, it passed fine. When I put headers on it has a flange now, also passed just fine.
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 04-13-2019, 06:39 PM #32
Ed_C's Avatar
Ed_C Ed_C is offline
Senior Member
 
Join Date: Oct 2011
Location: New Jersey
Posts: 1,227
Real Name: Ed
Ed_C will become famous soon enough Ed_C will become famous soon enough
Ed_C Ed_C is offline
Senior Member
Ed_C's Avatar
 
Join Date: Oct 2011
Location: New Jersey
Posts: 1,227
Real Name: Ed
Ed_C will become famous soon enough Ed_C will become famous soon enough
I figured as much with the EO #s, pretty sure I'm not the first person to think about/attempt it LOL.

Maybe try hiding the DT shorties even more with not only OEM manifold shields but also with additional ones to ummm...protect the converters from theft....yeah that's it
Ed_C is offline   Reply With QuoteReply With Quote
Old 04-18-2019, 11:23 PM #33
scribb's Avatar
scribb scribb is offline
Member
 
Join Date: Jan 2019
Location: San Rafael
Posts: 31
scribb is on a distinguished road
scribb scribb is offline
Member
scribb's Avatar
 
Join Date: Jan 2019
Location: San Rafael
Posts: 31
scribb is on a distinguished road
Quick Update

Just a quick update on this monumental project.

Big news is I heard from Kelford yesterday that they got the billet blanks in for the cams, and my cams will be milled next week and shipped. So it seems so far they were as good as their word on timing and scheduling, which is fantastic.

My Thorley shorty headers came in from URD. Thanks, Gadget!

I've been grinding away on essentially a full mechanical overhaul of most of the truck systems, other than the suspension and brakes which were recently done. Since I've driven the truck hard, it's got 150k miles, and I plan to keep it, I'm replacing things that are obvious weak links that should be serviced. Things like bushings, ball joints, hoses, etc. It's adding maybe 15% to the budget, but since I already have the truck apart and it's all easy to get to, it makes sense to do it now and not be left on the trail or the side of the road somewhere.

This weekend I tackled the lower control arms and generally cleaning up the wheel wells--including rust treatment for anywhere I can find surface rust on frame and components. I'm using Purple Power to degrease, then treating with Corroseal, then putting a fresh coat of paint over it. Pretty straightforward, but a lot of elbow grease.





I've also made progress on a grill mod. I liked Paraordnance's approach for the 2005, because it stayed true to the 2005 front end, rather than updating it to 2006. I like the simpler straight line of the lights, and keeping the grill in proportion rather than englarging it. Just personal preference.

I took a slightly different approach, and retained the size and shape of the bottom bar. It was definitely a challenge. I'll post a thread on how I did it--basically I made a Plaster of Paris mold of the bottom bar on one side, and moved it to the middle to create a fiberglass replacement after cutting out the toyota badge. I got the paint and grill material, and new headlights, which I should be able to complete this week. Just need to do a little more sanding to sharpen the lines in the center of the lower bar.



I'm pretty much on track at this point to have everything complete when I get the motor back, so when I get it back from the tuner, it'll basically be a completely fresh mechanical build, ready for the Sierras when the snow melts.

Last edited by scribb; 04-19-2019 at 12:54 AM.
scribb is offline   Reply With QuoteReply With Quote
Old 04-23-2019, 07:35 PM #34
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
Any plans to put your 4Runner on a dyno after it's all put together and tuned? I'd love to see what kind of potential the 2UZ-FE has, especially one done right like yours.
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 04-23-2019, 08:03 PM #35
4RunnerAquasport's Avatar
4RunnerAquasport 4RunnerAquasport is offline
Member
 
Join Date: Jan 2015
Location: Merritt Island, Florida
Posts: 675
Real Name: Brett
4RunnerAquasport will become famous soon enough
MY GARAGE
4RunnerAquasport 4RunnerAquasport is offline
Member
4RunnerAquasport's Avatar
 
Join Date: Jan 2015
Location: Merritt Island, Florida
Posts: 675
Real Name: Brett
4RunnerAquasport will become famous soon enough
MY GARAGE
Quote:
Originally Posted by gamefreakgc View Post
Any plans to put your 4Runner on a dyno after it's all put together and tuned? I'd love to see what kind of potential the 2UZ-FE has, especially one done right like yours.
Let's start a go fund me for some tuner and dyno time. I'll drop a hunji $$$
__________________

1988 DLX 22RE AUTO BLACK-"Granny"
2003 SR5 SPORT V8 STRATOSPHERIC MICA-"Pearl"
2012 LIMITED V6 SHORELINE BLUE PEARL- "LE Mae"
5TH GEN BUILD THREADhttp://www.toyota-4runner.org/5th-ge...ld-thread.html
4RunnerAquasport is offline   Reply With QuoteReply With Quote
Old 05-11-2019, 05:47 PM #36
AuSeeker AuSeeker is offline
Senior Member
 
Join Date: Nov 2016
Location: Bluffton S.C.
Posts: 2,448
Real Name: Skip
AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice
AuSeeker AuSeeker is offline
Senior Member
 
Join Date: Nov 2016
Location: Bluffton S.C.
Posts: 2,448
Real Name: Skip
AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice AuSeeker is just really nice
Quote:
Originally Posted by scribb View Post
Just a quick update on this monumental project.

Big news is I heard from Kelford yesterday that they got the billet blanks in for the cams, and my cams will be milled next week and shipped. So it seems so far they were as good as their word on timing and scheduling, which is fantastic.

My Thorley shorty headers came in from URD. Thanks, Gadget!

I've been grinding away on essentially a full mechanical overhaul of most of the truck systems, other than the suspension and brakes which were recently done. Since I've driven the truck hard, it's got 150k miles, and I plan to keep it, I'm replacing things that are obvious weak links that should be serviced. Things like bushings, ball joints, hoses, etc. It's adding maybe 15% to the budget, but since I already have the truck apart and it's all easy to get to, it makes sense to do it now and not be left on the trail or the side of the road somewhere.

This weekend I tackled the lower control arms and generally cleaning up the wheel wells--including rust treatment for anywhere I can find surface rust on frame and components. I'm using Purple Power to degrease, then treating with Corroseal, then putting a fresh coat of paint over it. Pretty straightforward, but a lot of elbow grease.





I've also made progress on a grill mod. I liked Paraordnance's approach for the 2005, because it stayed true to the 2005 front end, rather than updating it to 2006. I like the simpler straight line of the lights, and keeping the grill in proportion rather than englarging it. Just personal preference.

I took a slightly different approach, and retained the size and shape of the bottom bar. It was definitely a challenge. I'll post a thread on how I did it--basically I made a Plaster of Paris mold of the bottom bar on one side, and moved it to the middle to create a fiberglass replacement after cutting out the toyota badge. I got the paint and grill material, and new headlights, which I should be able to complete this week. Just need to do a little more sanding to sharpen the lines in the center of the lower bar.



I'm pretty much on track at this point to have everything complete when I get the motor back, so when I get it back from the tuner, it'll basically be a completely fresh mechanical build, ready for the Sierras when the snow melts.
Very interesting topic, wish you the best of luck.

Any updates on your progress?
__________________
2004 Limited V8
AuSeeker is offline   Reply With QuoteReply With Quote
Old 05-20-2019, 01:38 PM #37
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
I'm very interested to hear how this is going! I'm guessing you might just be waiting for the engine rebuild right now.
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 05-22-2019, 07:07 PM #38
scribb's Avatar
scribb scribb is offline
Member
 
Join Date: Jan 2019
Location: San Rafael
Posts: 31
scribb is on a distinguished road
scribb scribb is offline
Member
scribb's Avatar
 
Join Date: Jan 2019
Location: San Rafael
Posts: 31
scribb is on a distinguished road
Yup. Playing the waiting game at the moment, mostly. I'm *hoping* I can get the motor back, installed, and off to the tuners before I head out for vacation mid-June, but it's going to be tight. Just too many uncharted issues to figure out that have made this drag on. But I'll post an update as soon as there's something worthwhile to report.
scribb is offline   Reply With QuoteReply With Quote
Old 05-26-2019, 12:24 AM #39
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
Quote:
Originally Posted by scribb View Post
Yup. Playing the waiting game at the moment, mostly. I'm *hoping* I can get the motor back, installed, and off to the tuners before I head out for vacation mid-June, but it's going to be tight. Just too many uncharted issues to figure out that have made this drag on. But I'll post an update as soon as there's something worthwhile to report.
Better hurry before my 4Runner is faster than yours lol! I tweaked my tune over the past few weeks and I'm over 300 RWTQ on the virtual dyno program I use (calibrated from actual dyno runs I did last year). That's still with the stock exhaust too.

Speaking of exhaust, did you mention if you were changing it? I'm not sure if I should go 2.75" piping or 3". Currently at the Toyota weirdo size of 2.4" but it's crush bent down to 2.25" on the curves. Pretty restrictive.
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 06-18-2019, 10:22 PM #40
Inv4drZm's Avatar
Inv4drZm Inv4drZm is online now
Senior Member
 
Join Date: Sep 2015
Location: Kansas
Age: 24
Posts: 2,956
Inv4drZm is just really nice Inv4drZm is just really nice Inv4drZm is just really nice Inv4drZm is just really nice
MY GARAGE
Inv4drZm Inv4drZm is online now
Senior Member
Inv4drZm's Avatar
 
Join Date: Sep 2015
Location: Kansas
Age: 24
Posts: 2,956
Inv4drZm is just really nice Inv4drZm is just really nice Inv4drZm is just really nice Inv4drZm is just really nice
MY GARAGE
Quote:
Originally Posted by scribb View Post
Yup. Playing the waiting game at the moment, mostly. I'm *hoping* I can get the motor back, installed, and off to the tuners before I head out for vacation mid-June, but it's going to be tight. Just too many uncharted issues to figure out that have made this drag on. But I'll post an update as soon as there's something worthwhile to report.
Here's a built 2UZ, maybe you can get some info from the build sheet picture.

Pretty cool.

RockSolidToys on Instagram: “Hey guys. I have a customer who has this 4.7L for sale. It has been run since it’s been built. He paid $17k to have it built and is asking…”
__________________
2005 4R Sport 4WD "The last of the V8s!" - Dirty Deeds 20" SS Exhaust - Icon 2.5 Resi's. - 1.5" BL - SCS SR8's - 35's Build Thread


Last edited by Inv4drZm; 07-02-2019 at 10:23 PM.
Inv4drZm is online now   Reply With QuoteReply With Quote
Old 06-28-2019, 03:17 PM #41
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
Are they ever going to give you your engine back?
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 08-08-2019, 06:27 PM #42
gamefreakgc's Avatar
gamefreakgc gamefreakgc is offline
Elite Member
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
gamefreakgc gamefreakgc is offline
Elite Member
gamefreakgc's Avatar
 
Join Date: Oct 2014
Location: Citrus Heights, California
Posts: 5,107
Real Name: Jerod
gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough gamefreakgc is a jewel in the rough
Any update? Super curious how it all turns out.
__________________
'98 4Runner SR5 - 4x4 5VZ-FE Supercharged - 222k miles, JDM engine @ 221k

AEM F/IC 6 Piggyback, 2.1" pulley at 11 PSI, Go-Fast Parts
Jerod's Supercharged T[u]RD Build
gamefreakgc is offline   Reply With QuoteReply With Quote
Old 08-08-2019, 06:38 PM #43
Canada22 Canada22 is offline
Junior Member
 
Join Date: Jul 2019
Location: Boston, MA
Posts: 9
Canada22 is on a distinguished road
Canada22 Canada22 is offline
Junior Member
 
Join Date: Jul 2019
Location: Boston, MA
Posts: 9
Canada22 is on a distinguished road
Just finished reading this thread, seriously would love an update!
Canada22 is offline   Reply With QuoteReply With Quote
Reply

Tags
back , build , engine , lot , power

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
96 3.4 Radiator Blew Up reelamin 3rd gen T4Rs 20 01-16-2019 11:31 AM
Blew up my motor imryannn 3rd gen T4Rs 40 08-24-2017 03:56 PM
Well.. transmission blew.. what next? spazzyone 3rd gen T4Rs 31 08-05-2017 11:40 AM
Radiator blew up mphillips_90 3rd gen T4Rs 7 10-30-2016 07:45 PM
My Engine Blew! mrbee2828 Problems & Warranty Issues 13 10-10-2004 08:23 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 07:50 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2019


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.