User Tag List

Reply
 
Thread Tools Rate Thread Display Modes
Old 07-11-2020, 10:09 PM #1
axelandy axelandy is offline
Junior Member
 
Join Date: Oct 2017
Posts: 9
axelandy is on a distinguished road
axelandy axelandy is offline
Junior Member
 
Join Date: Oct 2017
Posts: 9
axelandy is on a distinguished road
Bilstein/eibach/lift question

Having read through countless threads on bilsteins/eibach’s/etc I’m needing some help. Have a 2020 4Runner venture that I decided to go conservative on with just a bilstein 5100 level to start, with intentions on upgrading further down the line. Wanted the bilstein set to the 1.75” setting with nothing in the rear. The shop ended up setting it at the max height so now I’m pretty significantly front high. They have agreed to reset it for me in a couple of weeks.

My question is this, I do like the stance set at 2.5” and the ride quality has been fine, other than being nose high. I began searching for options for the back to level it out and found the eibach lift kit that’s 2.75” front and 1” rear that most say is level. Do I just throw the eibach or more 5100’s on the rear with a 1-1.5” coil on the rear and call it good? I know a lot of people complain about the bilsteins at the top height setting and my preference if I was going this route would have been just use the entire eibach kit. Is the ride quality of the eibachs or another kit that uses the spring for the lift that much better than the bilstein at the top setting?

I guess I have 3 options, let them reset it to 1.75” and go on, add 1-1.5” spring and shocks to the rear, or buy a kit like eibach and start from scratch. Any insight with experience with the different lifts is appreciated. The truck has <2k miles so I wasn’t really wanting to do UCA’s and my initial intention was to just level and keep it close to stock. Now I’m not sure as I like the stance at 2.5”.
axelandy is offline   Reply With QuoteReply With Quote
Reply

Tags
eibach , kit , level , rear , setting

Thread Tools
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Toytec 3" Bilstein/Eibach lift kit questions redneckj 3rd gen T4Rs 10 04-27-2020 12:00 AM
Bilstein 5100 + 112-620 Eibach springs = 3.5" lift? Junkwhale 3rd gen T4Rs 18 09-20-2018 07:51 AM
Can't decide. Bilstein 5100s w/ Eibach Pro lift springs or 6112s TimeZone 3rd gen T4Rs 1 08-07-2018 06:18 AM
Quick Question- Tundra Bilstein 4600's with Eibach 3" Lift Coils Acorn22 3rd gen T4Rs 4 06-02-2017 06:46 PM

Powered by vBadvanced CMPS v3.2.2

All times are GMT -4. The time now is 10:25 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Search Engine Optimisation provided by DragonByte SEO (Pro) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
Feedback Buttons provided by Advanced Post Thanks / Like (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
User Alert System provided by Advanced User Tagging (Lite) - vBulletin Mods & Addons Copyright © 2024 DragonByte Technologies Ltd.
***This site is an unofficial Toyota site, and is not officially endorsed, supported, authorized by or affiliated with Toyota. All company, product, or service names references in this web site are used for identification purposes only and may be trademarks of their respective owners. The Toyota name, marks, designs and logos, as well as Toyota model names, are registered trademarks of Toyota Motor Corporation***Ad Management plugin by RedTyger
 
Copyright © 2020