Correct wiring harness for a 2004 JBL non Nav - Toyota 4Runner Forum

cdoyle · 04-24-2021, 05:10 PM

Hi,
Been trying to figure out which harness I need to update the stereo and not have to cut any wires.

2004 Limited, with JBL non nav

Behind the headunit I see 3 plugs.

I have a Metra 70-8114 which is supposed to be for the steering wheel controls.
Is this the correct one?

Which part #s do I need for the other ones? Metra's site listed a 70-1761 but that's totally not correct. Wrong size all together.

I believe I need a 70-8117, but before I spend any more money, is this the correct one?

Thanks!

cdoyle · 04-25-2021, 10:07 AM

Anyone know?
Is the Metra 70-8117 the correct harness to buy?

JD914 · 04-25-2021, 11:49 AM

Check Crutchfield.com. They’re really good about adding on the correct accessories.
If you already own a head unit, you might need to load your vehicle and put a head unit in your cart for them to suggest the correct harness.

Sent from my iPhone using Tapatalk

Tha Krazy One · 05-25-2021, 03:38 PM

What you need with be the 70-8113, or could be you need an interface which would be the AXDI-TY1. It's an amplified harness. You might not have JBL but it means its still amplified, just not with the JBL Digital amp which would require the AXTO-TY1. The 70-1761 is for basic audio which you just mentioned is not it due to the harnesses not lining up. The 70-8117 is an amplifier bypass harness.

NCHornet · 06-01-2021, 06:52 PM

I have used Crutchfield's for this type of info. If you enter all your info it will tell you every adapter and trim kit required for a plug n play install. If that is where you got the incorrect harness number call them and they will look it up and verify the correct parts.
NCH

Site Navigation