02-05-2012, 12:24 PM
|
#91
|
|
Member
|
|
Join Date: Jan 2012
Location: AZ
Posts: 183
|
|
|
Member
Join Date: Jan 2012
Location: AZ
Posts: 183
|
Been a while, I know. I want to tap the ILE at the dome overhead and just run a short wire forward to the maplights. I know the ILE is pin 2, solid white... But I've got to harnesses connected to the dome (I have a 2004 Sport with JBL Synthesis and wireless headphone option) and don't know which pin is which. LOTS of solid whites in these harnesses. Anyone have a pic or a good way to test for the right pin?
__________________
‘18 White ORP w/ KDSS; Shrockworks sliders; Method MR701s + Falken AT3W 265/70/17 SL; Bilstein 6112/5160s; OrangeBoxx MOLLE panel (R); GOBI rack & ladder; Morimoto Elite HIDs (50W 5500k); Infinity REF 3032 3.5” speakers (dash location)
|
|
 Reply With Quote
|
|
08-16-2012, 08:55 PM
|
#92
|
 |
Member
|
|
Join Date: Oct 2009
Location: Kirkland, WA
Posts: 255
|
|
|
Member
Join Date: Oct 2009
Location: Kirkland, WA
Posts: 255
|
Hello all, I just completed this mod and everything went smoothly. However the map light console is much looser than when I took it off. Did I bend a clip? If so, does anyone have a part number for those? I might just epoxy it to the head liner.
|
|
|
Reply With Quote
|
|
05-28-2013, 11:40 PM
|
#93
|
|
Junior Member
|
|
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
|
|
Junior Member
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
2007 T4R. I want to make sure I have the correct wires to tap into. Here's a pic of the 3-ribbon blue-striped wire at the fuse box. I tap the middle wire, correct?
|
|
|
Reply With Quote
|
|
05-29-2013, 11:28 AM
|
#94
|
|
Junior Member
|
|
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
|
|
Junior Member
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
Bumping.
|
|
|
Reply With Quote
|
|
05-30-2013, 03:59 PM
|
#95
|
|
Junior Member
|
|
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
|
|
Junior Member
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
Bumping again.
|
|
|
Reply With Quote
|
|
08-21-2013, 03:06 PM
|
#96
|
|
Junior Member
|
|
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
|
|
Junior Member
Join Date: May 2013
Location: Irvine, CA
Posts: 14
|
I did this mod and all is good with the wife now ;)
Last edited by Dennx; 08-21-2013 at 03:11 PM.
|
|
|
Reply With Quote
|
|
10-19-2013, 09:14 AM
|
#97
|
 |
Member
|
|
Join Date: Sep 2013
Location: new jersey
Age: 44
Posts: 124
Real Name: George
|
|
|
Member
Join Date: Sep 2013
Location: new jersey
Age: 44
Posts: 124
Real Name: George
|
did this mod yesterday but i ran a wire from the switched ground on the center dome to the grounds on the front map lights so whenever the dome comes on the maps would too but didnt like that both maps would light if one was switched on so i added 2 small diodes to back and now when the door is opened or the center dome is switched on all the lights work but you can also use each map light individually now its the way it should have been from the factory
__________________
04 limited v6 4wd 6" rough country fj lift pn#770s 35 12.5 17 wrangler mtr tire method 17 8.5 fat five rims
|
|
|
Reply With Quote
|
|
10-21-2013, 04:01 PM
|
#98
|
 |
Member
|
|
Join Date: Apr 2011
Location: Orange County, CA
Posts: 267
|
|
|
Member
Join Date: Apr 2011
Location: Orange County, CA
Posts: 267
|
So it was the middle wire in the 3 wire bundle?
Still need to do this mod
__________________
2007 SE, Galactic Grey Mica - original owner
Mods/Upgrades: Oh Crap Handle on driver's side, Hilux Surf Trash Stash, Amber Colored Auto-Dimming Mirror w/compass, USB ports using 115V switch, LED interior, Weathertech Digital Floor Liners, Homelink Garage Door Opener, Footwell Lighting, Automatic Headlights, Dual Cargo Organizers, Maplight Mod, Morimoto 5k HID Low-Beam and Fogs, LED exterior, 15% 3M tint, AVIC-6100nex, Pioneer speakers (TS-G1345R, TS-G1645R, TS-T110), Limited Grill, Mini Backseat Organizer, Heated Cloth Seats, KO2s
|
|
|
Reply With Quote
|
|
04-02-2014, 04:57 PM
|
#99
|
 |
Member
|
|
Join Date: Oct 2012
Location: Paducah, KY
Posts: 197
|
|
|
Member
Join Date: Oct 2012
Location: Paducah, KY
Posts: 197
|
Trying to read through this isn't easy for someone that has never done this, and the blurry pics from 2005 don't help either. Has anyone simplified this mod yet? I'd like to do it but the OP seems risky so I'd like to be 100% clear on what I need to do before I begin.
__________________
Quote:
Originally Posted by LTDSC
I always wondered how big yours in compared to mine because I think it looks huge
|
|
|
|
Reply With Quote
|
|
10-13-2016, 05:46 PM
|
#100
|
 |
Member
|
|
Join Date: Jun 2016
Location: Minnesota
Posts: 677
|
|
|
Member
Join Date: Jun 2016
Location: Minnesota
Posts: 677
|
Bump and +1 rep for an old thread!
It's been darker in the mornings now with fall here and not having the front of the cabin light up sucks. 10 mins, a couple feet of 18g wire and a 2 wire taps did the trick!
I didn't bother to remove the A Pillar trim. From the map lights, I just ran the wire to the door, tucked it under the top of the A Pillar plastic trim, ran it down the weather stripping, and tapped into the fuse box connector. Once you have all that figured out and done, just tuck the exposed wiring along the windshield into the headliner.
Thanks again!
__________________
07 T4R Sport Edition V6 4x4
|
|
|
Reply With Quote
|
|
10-18-2019, 06:46 AM
|
#101
|
|
Junior Member
|
|
Join Date: Oct 2019
Location: USA
Posts: 1
|
|
|
Junior Member
Join Date: Oct 2019
Location: USA
Posts: 1
|
"You can even get to know yourself better, courtesy of the local handwriting analysts. .... Let it turn the generator and have it run on electricity" Now, I like an SUV, but I ..... CAMBIUM PTP BACKHAUL assists residents with everything from party planning to personal training. .... very light yellow — for the interior of the train that will take people to the park.
|
|
|
Reply With Quote
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
Linear Mode
