Sway Bar Links - Eugene, OR - Page 42 - Toyota 4Runner Forum

MStudt · 05-17-2021, 08:10 AM

Quote:

Originally Posted by Token_Indian

So I just purchased 2.5 fox's all around for the 14' SR5 runner and was wondering at what height would it be recommended to upgrade the sway bar end links?

I think I will be raising it to 2.5in to maybe 3in the front and it will be paired with aftermarket upper control arms.

As for the rear, just enough to level the ride with the front, I think 1.5in?

Would it make sense to switch out the front end links with the upgraded pair and keep the rear stock or would the increased height stretch the stock links too much?

Thanks in advance.

Would make more sense the switch out the rear with an upgraded pair, and leave the front. The rear will be longer so you can get your sway bar back to its OEM position. The front links will be the same length as OEM, and you want it like that.

Mike

toverturf · 06-09-2021, 09:40 PM

Is it possible to get replacement ball joints? I had the nut fall off one and mess up the threads pretty bad on one so I can't get a nut back on very far.

MStudt · 06-09-2021, 10:11 PM

Quote:

Originally Posted by toverturf

Is it possible to get replacement ball joints? I had the nut fall off one and mess up the threads pretty bad on one so I can't get a nut back on very far.

Yes, they're available on my site.

Mike

4RunnerAquasport · 06-09-2021, 10:26 PM

Glad to see your still gettin some work Mike! Still have mine after 6 years/60k miles.

MStudt · 06-10-2021, 11:44 AM

Quote:

Originally Posted by 4RunnerAquasport

Glad to see your still gettin some work Mike! Still have mine after 6 years/60k miles.

More than I can handle right now.

Mike

Krayziekid · 07-17-2021, 10:23 PM

Hey Mike!

Got a quick question for ya. Had some dobinsons extended rear sway bar links on my 5th gen. All in all, not impressed. Totally shredded in under 2 years. Looking for an upgrade and have literally only heard good things about your links.

Looking for rear links only. Currently have 3" lift with Dobinsons 3" 677v coils and extended travel kings. Live in the Northeast where salt is a big winter problem lol. Not sure I fully understand the difference/benefits between the Heim links and the Forged links on your website. I'm leaning the Forged links, but any chance you have a 2-sentence explainer as to what the pros/cons of each are? Thank you!!

crackystride · 08-17-2021, 04:11 PM

Planning to lift ~2" all around on my GX470 with the eibach 2.0 coils and rear adjusting springs and matching shocks. Eyeing the forged front and rear end links. Would I need both front and rear? TIA

MStudt · 08-20-2021, 12:07 PM

Quote:

Originally Posted by crackystride

Planning to lift ~2" all around on my GX470 with the eibach 2.0 coils and rear adjusting springs and matching shocks. Eyeing the forged front and rear end links. Would I need both front and rear? TIA

I have them in stock, and usually ship within a 2 business days.

Mike

caeavesrsx-s · 08-27-2021, 11:02 AM

Just ordered all four. 200k on the originals and all are shot. Time for an upgrade!

osideplayer · 09-13-2021, 11:16 PM

Quote:

Originally Posted by MStudt

My new links are live on the site. Follow the link below, and get free shipping through the end of the year. Here's the link(s).

How do I get free shipping? Will these work on a stock 3rd gen 4runner. Will be doing a lift next year, but my OEM sway bar links are shot.

MStudt · 09-14-2021, 01:02 PM

Quote:

Originally Posted by osideplayer

How do I get free shipping? Will these work on a stock 3rd gen 4runner. Will be doing a lift next year, but my OEM sway bar links are shot.

I wouldn't try using extended sway bar links on a stock vehicle since they'll put your sway bar in a bad position.

I do not offer free shipping on sway bar links either.

Mike

OnTheEllipse · 09-25-2021, 01:56 PM

I’m replacing my sway bar bushings and I’m reassembling my sway bar links. I can figure out/remember how much thread should be showing through the nut on top of the sway bar/link?

crackystride · 12-19-2021, 12:18 AM

Is there a guide to install these? I just got a set of front and rears and just wondering why it came with 2 extra nuts and just wanna make sure how to position each washer on the each end.