01-12-2020, 06:00 PM
|
#1
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
FS, AZ: Bilstein 600lb coils (125$), Dobinsons coils(125$), OEM springs and shocks
I am selling my collection of front end springs
Bilstein 600lb coils from 6112. Used for a couple thousand miles and only a couple hundred offroad. This coils are meant for a stock front end vehicle. They provide supreme comfort with skid plates and sliders and will do great for most people in most states offorad as well. However, they were a bit soft for my desert and rock use. Replaced with Bilstein 650lb coils. Asking $125. These are NOT for regular shocks!
Dobinsons C59-238. These provided me with 1.25" of front lift with 3/16 skids and sliders. I used them for 7,000 miles and was perfectly happy with them. I like them better than either of my Bilstein pairs but they cannot work with 2.5-2.65" shocks. Asking $125. I am very much inclined to keep them but I don't think I will be going back to smaller shocks.
I also have OEM front springs and shocks from a KDSS 4Runner as well as the rear shocks from the same vehicle. I bought an entire used suspension to have a second set of UCAs and tophats. I already sold the rear springs and I am now selling the rest. I was told the suspension had 12-14,000 miles. You can see on pictures how much better the rear shocks look compared to mine, seriously and often offroaded OEM shocks, which I will keep. I bought the whole thing cheaply so I am selling the parts I don't need accordingly: 50$ for the front coils and the 4 shocks or 20$ for each pair.
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
Last edited by MAST4R; 01-12-2020 at 06:02 PM.
|
|
Reply With Quote
|
01-31-2020, 01:08 AM
|
#2
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
Bump!
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
|
|
Reply With Quote
|
02-16-2020, 12:13 AM
|
#3
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
Ok, then, 100$ for the Dobinsons springs (plus shipping), 100$ for the 600lb Bilstein springs (plus shipping), and 50$ for all components of the stock KDSS suspension (front springs and shocks, rear shocks).
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
|
|
Reply With Quote
|
02-16-2020, 02:51 AM
|
#4
|
|
Senior Member
|
|
Join Date: Nov 2019
Posts: 1,117
|
|
Senior Member
Join Date: Nov 2019
Posts: 1,117
|
I wish I didn't owe on taxes this year.
Sent from my SM-G955U using Tapatalk
|
|
Reply With Quote
|
02-16-2020, 07:30 AM
|
#5
|
Member
|
|
Join Date: Aug 2019
Location: Miramar,Fl
Posts: 30
|
|
Member
Join Date: Aug 2019
Location: Miramar,Fl
Posts: 30
|
Will the Dobinsons fit a 2008 4 runner? what kind of height do they give. I recently ordered bilstein 5100 shocks all around. The kit also came with bilstein rear Coil springs. I chose the 1.7-1.8 height. Not sure if i made a mistake buying the coil springs I haven't seen anyone talk about them. The kit was 510 otd. on bilsteinlifts.com . I dont want to preload my fronts too much. So just curios about what springs i should put up there.
|
|
Reply With Quote
|
05-24-2020, 02:04 AM
|
#6
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
Still available!
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
|
|
Reply With Quote
|
05-24-2020, 09:43 PM
|
#7
|
Junior Member
|
|
Join Date: Apr 2019
Location: Mechanicsville
Posts: 4
|
|
Junior Member
Join Date: Apr 2019
Location: Mechanicsville
Posts: 4
|
Shipping to Virginia? Very interested, will they fit 4th gen? I don't see why they wouldn't but someone might know better than me
|
|
Reply With Quote
|
05-25-2020, 11:42 AM
|
#8
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
Quote:
Originally Posted by Bl0wenos
Shipping to Virginia? Very interested, will they fit 4th gen? I don't see why they wouldn't but someone might know better than me
|
No idea, but afraid won't be cheap. Also, no idea about the exact fit on a 4th gen.
Which part do you need? The Dobinsons or the Bilstein springs? The latter can only be used with the 6112s.
I could check shipping if you PM me a zip code.
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
|
|
Reply With Quote
|
06-01-2020, 05:57 PM
|
#9
|
|
Senior Member
|
|
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
|
Senior Member
Join Date: Jan 2019
Location: AZ
Posts: 1,385
|
Dobinsons SOLD, Bilstein reduced
The Dobinsons have found a good home.
I am reducing the 600lb Bilstein from 125 to 90.
Shipping is normally 30-40 within the lower 48.
I understand these are in low demand because they only work with big shocks, but if you bought 6112s with the 650lb coils and want a softer ride, these are the ticket.
__________________
2018 TRD OP non-kdss, well armored, well used
(6112s/650lb at 2.25" lift, 8100 rear with Bilstein B12 1.5" springs, Mickey Thompson ATZ P3 LTE 265 70 17, RCI set of front 3/16 skids, Shrockworks step sliders and 3/16 steel gas tank skid, C4Fab rear diff skid, Rockmen rear LCAs, Total Chaos rear LCA bracket skids, Diode Dynamics SS3 white fog lights).
|
|
Reply With Quote
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|