Note the tension roller on the drawer. this is so the drawer stays open on slit declines till I push it shut

Note the tension roller on the drawer. this is so the drawer stays open on slit declines till I push it shut

  • Media owner Rack
  • Date added Jan 17, 2019
  • Reaction score 0
  • Comments 0
Rubber diamond plate mate installed with YETI

Rubber diamond plate mate installed with YETI

  • Media owner Rack
  • Date added Jan 17, 2019
  • Reaction score 0
  • Comments 0
Loaded for fishing trip

Loaded for fishing trip

  • Media owner Rack
  • Date added Jan 17, 2019
  • Reaction score 0
  • Comments 0
IMG 5347 Finished with Goose gear compression latches These hold the drawer tight to keep it from rattling.

IMG 5347 Finished with Goose gear compression latches These hold the drawer tight to keep it from rattling.

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5342 Full extension glides with 1" over travel made these a great fit. keep in mind the depth of the cabinet has to be a few inches deeper than th

IMG 5342 Full extension glides with 1" over travel made these a great fit. keep in mind the depth of the cabinet has to be a few inches deeper than th

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5339 completed drawer system installed. A diamond plate rubber mat will be put on top to protect the finish. 41-1/2" X 32" x 7"

IMG 5339 completed drawer system installed. A diamond plate rubber mat will be put on top to protect the finish. 41-1/2" X 32" x 7"

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5331Goose gear compression latch installed in mock up drawer front

IMG 5331Goose gear compression latch installed in mock up drawer front

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5330 Mock up drawer front with goose gear compression latch. Built mock up so as not to damage finished drawer front. no instructions came with l

IMG 5330 Mock up drawer front with goose gear compression latch. Built mock up so as not to damage finished drawer front. no instructions came with l

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5325 accuride 3640 28" 200 lb glides. the drawers are removable. nice feature if something fall behind the drawer.

IMG 5325 accuride 3640 28" 200 lb glides. the drawers are removable. nice feature if something fall behind the drawer.

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5323 Turn buckles for holding cabinet in place. notice the glides they take up 1 inch on each side of cabinet opening. Drawers are 2 inches narrow

IMG 5323 Turn buckles for holding cabinet in place. notice the glides they take up 1 inch on each side of cabinet opening. Drawers are 2 inches narrow

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5321 Test fit yeti and action packer.

IMG 5321 Test fit yeti and action packer.

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5269 Black stain 3 coats of poly

IMG 5269 Black stain 3 coats of poly

  • Media owner Rack
  • Date added Jan 20, 2018
  • Reaction score 0
  • Comments 0
IMG 5256 cabinet and drawers. install glides in cabinet and measure with glides retracted into cabinet prior to building drawers. notice the three dra

IMG 5256 cabinet and drawers. install glides in cabinet and measure with glides retracted into cabinet prior to building drawers. notice the three dra

  • Media owner Rack
  • Date added Jan 19, 2018
  • Reaction score 0
  • Comments 0
IMG 5253 preparing for stain and poly. The glides were installed prior to the top being placed. I only had 7" to work with. leveling the glides and sc

IMG 5253 preparing for stain and poly. The glides were installed prior to the top being placed. I only had 7" to work with. leveling the glides and sc

  • Media owner Rack
  • Date added Jan 19, 2018
  • Reaction score 0
  • Comments 1
IMG 5245 Started with 3- 5'x5' sheets of 1/2" Baltic birch plywood. measured for rough cuts

IMG 5245 Started with 3- 5'x5' sheets of 1/2" Baltic birch plywood. measured for rough cuts

  • Media owner Rack
  • Date added Jan 19, 2018
  • Reaction score 0
  • Comments 0
R

Rack's Storage drawers

  • Items 15
  • Album owner Rack
  • Date created
Here are some pics of my storage drawer build.click on the picture for explanation of that part of the build.
Click to expand...
There are no comments to display.

Album information

Album owner
Rack
Date created
Item count
15
View count
0
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

R

Rack

Media items
98
Albums
14
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Members online

Total: 2,269 (members: 3, guests: 2,266)

Forum statistics

Threads
278,316
Messages
3,554,120
Members
248,016
Latest member
Advally Service

Share this page

Back
Top