Recent content by 10ac

Pioneer I just bought the 10.1” floating. DMH-WT8600NEX. Had to do a little custom work. Didn’t like how far it stuck out so i moved it closer to the dash. I ordered a monitor extension cable from pioneer and made a bracket and its coming out good. The main unit will still fit behind too! If...

KYB sm5640 on amazon. https://www.amazon.com/s/ref=nb_sb_ss_i_8_4?url=search-alias%3Daps&field-keywords=kyb+sm5640&sprefix=KYB+%2Caps%2C206&crid=WIBV1S6ZOLZL

Yes they will for sure. It’s the only ones they sell that will fit the pro and 6112

Brake parts Pmd u about brake parts

can someone please tell me the part numbers for ALL the seals needed when replacing the cv axles on both driver and passenger side please. OEM part numbers. I have a 2006 Toyota 4Runner limited V8 AWD. dunno if the differential is different between AWD and 4X4 selectable. I was planning to...

Correct. A 2.5” body coilover uses a 3” coil. King coilover makes a spring and Eibach makes them as well. Read this and may eliminate that lower spacer. http://www.toyota-4runner.org/5th-gen-t4rs/238869-bilstein-6112s-heavier-springs.html Has been done as u can see on a 6112. And u can use...

Trd coil swap Been researching. Found a few options it seems for adding lift coils and get different spring rates to accommodate for plate bumpers and winches etc. the stock Trd coils are I believe 550lb 3x13”. You can use either a Eibach or king coilover which has been done. A 3”x14” 650 or...

Keep this in mind, Dobinsons said they are working on 2” lift springs. Doing testing. May be available in 4mths. Or possibly the Eibach 14” x 3” 650lb...

Rather than cut, you just use the toytec spring perch spacer. It basically does same thing as if having the added notches. I did look up other springs that should work. Eibach and king makes them. King is the best price. It’s a 14” length , 3” internal diameter, 650 or a 700 pound spring rate...

I’m running Icon 2” rear lift springs. Using the 5th gen seems good too. Never thought of that. Right now just hoping I can get a lift spring with higher rate to work on the Trd coilover.

I am installing the trd pro kit. So im needing to get at least 3” of lift. I can probably get 2.5” but i would have to use spacers. Lower spring perch spacer. ( preload) and a top plate spacer. I would much rather use a taller(14” instead of 13”) coil spring and a different rate(600 or 650#...

Emailed Dobinsons. Thanks! My plan is to avoid using the toytec spring perch spacer(preload). I don’t mind adding a 1/2” top plate but not the preload spacer. I am trying to get as close to 3” as possible. Hopefully dobinsons has a lift coil and the rate I will need for a plate front bumper and...

They do not. Amazon has them for about 21 bucks each or some parts stores local have them for little more expensive. They are KYB sm5640. Other than that, the Trd Pro kit is complete and for the price, even if u have to spend a little more at different places that still have them, it’s worth it...

Ok suspension gurus, so I have a 2006 t4r V8 4x4. How much lift will I get? These are 1” higher than stock just throwing them on let’s say a stock basic 5th gen or fj right? So on my t4r will it be 1” higher then I add the toytec spring perch spacer then that’s 2” then 1/2” top plate for about...

Hey. Yes I received my kit. Pretty stoked. The box came in damaged, I inspected everything and it was good. I did mention it to the Toyota parts department and they refunded my shipping costs. But I ended up getting the kit for 487 total. I will be installing the kit very soon.