Recent content by 4runnerlaw

2” Icon in rear. 500 lb springs on king adj resi w/ 4 & 5 threads showing and 1/4” top hat spacer up front. 3” overland will be too tall unless you have serious weight in the rear Sent from my iPhone using Tapatalk

Body mount chop complete - I used the metal tech 4x4 BMC kit for this - I did the chop and fit, had a local shop weld it for me.

Body Mount Chop complete...will find a shop to weld the steel back in place. I used Metal Tech BMC kit, these plates fit pretty good but a little oversized, I ground them down about an 1/8” for a better fit. Hammered back the pinch weld, trimmed a little more off the front bumper and the...

I installed a diff drop only to remove it. The benefit on the cv shaft is minimal and the hassle of dropping the skid plates to adjust for a lower diff is not worth it. I prefer the extra clearance. Sent from my iPhone using Tapatalk

I just realized that they installed the “DT” version on my spare and it’s missing the 3 peak mountain symbol. I ordered the original, hopefully the set is correct when I go to pick them up today. <update> Luckily they ordered the correct version so they had 5 Load E non-DT's in stock and...

Ratchet strap the sway bar back to control arm Sent from my iPhone using Tapatalk

Only two wires go into the rear view mirror. Unplug from the back of the mirror to give yourself some space. The plastic covering the wire on the window just pulls down from the headliner and reveals the wire inside of a tubing. Carefully take a razor blade to slice the tubing open, you will...

Fitting 285 70 17s, I had the spare done so I can determine if I will chop the body mount and if I need any other fitment adjustments. I already pushed the front fender liner forward and heated and flattened out front flaps for 275’s but after my lift the driver side rubbed at full lock so I’ve...

Picked up a remote start from Accessoride -> Wow this thing is well worth the money not a single wire to tap, 100% plug and play via 3 harnesses. Uses the factory keyfob and I also ordered the cellular option. I have put in time on remote starts when you tapped every wire and run a ton of...

Black is the only color. Sent from my iPhone using Tapatalk

Installed a TRD intake. This thing is loud and at full throttle under load it was vibrating the hell out of the inner fender it passes through. I used some rubber weather stripping for a nice tight fit and it fixed all the extra vibes. Now it just sounds clean and throaty. Seems I improved .8...

Installed a 1” diff drop kit from dobinson which required a drop on my skid plates. With the drop the trd skid doesn’t clear my kdss sway bar so instead of further hacking up my skid plates I chose to remove the drop kit. Let me know if you want the kit, it includes spacers for skids and front...

Finally getting a chance to post since I installed my lift two weeks ago. I have 1/4” top hat spacers and set my coil overs at 4 threads driver and 5 threads passenger, I may add 1-2 more threads next week for a more level look. Very happy with this setup, I spent a day at Uwharrie last week...

I was actually able to buff it out with hand wax and elbow grease but it took a bit of work and left some swirl marks because I had to really push at it. I would recommend a body shop that’s skilled it took a few passes with cleaner wax application and buffing to finally get it out. At this...

Thanks! No zerks as it would def not fit. I also thought about doubling the 3m rings but it still wouldn’t fit. Maybe with 3. Something doesn’t seem right here... I’ll pass a photo of how high it sits when I get a chance this evening. Sent from my iPhone using Tapatalk