Recent content by 4runnerlexky

So of course everyone knows that with these 4Runners they rust a lot.that is why I've come to the decision that I am going to replace the exhaust manifolds on this since it is horrible sounding. I have about a 4 mm diameter hole on the bank 3 part of the exhaust. worst part was is when I was...

Hello Lads, There was a slight problem with brakes and I changed the fronts. Upon doing so I snapped the brake hard line going to the caliper. This halted production of all four since the store was closed. Next day found a brake line 8 inches. Please get a pipe bender. I know you say you can...

Without further ado. There was a massive difference on noise. Nice and quiet............until the magnaflow and thurleys come in. Tapatalk Cloud - Downlaoad File YouCut_20210108_181011216.mp4 Sent from my SM-N986U using Tapatalk

So on my Pass bank manifold has developed a horrible leak. I have managed to fix it. Tools needed: Shop Vac 10mm to remove air filter tube Exhaust cement Heat gun 24 hours of time I managed to apply a ludacris amount of muffler cement after cleaning the manifold. In fact the hole was below. I...

Thank you guys so much!!!! This is the wooshung sound I've been trying to diagnose for over two weeks. I dried the carpet by heating it and vacuumed the floor. What do you know a day later back to it again. I will tell you this. I used a ziptied and ran through the hose and lots of water came...

why I chose sr5 When I first looked at 4runners. I thought the limited would be great. I'm not saying it is but there is one big con. Bag suspension to raise and lower. This is something that will go out over time and with high mileage and traveling you wouldnt want to deal with this on the...

By any chance when swapping with the FJ suspension, I noticed that the toytec body lift is cheaper than the springs. Should I go for the 3 inch body lift and wait to save money. I was thinking about doing the Icon stage 5 suspension with modified high clearance lower control arms.

Wet Floorboards solved Hey so this was a recent problem with me. I did find out that my drain plug was clogged. I did fix it simply by putting a ziptie through the line and it drained perfectly. There is still some condensation issues which I will have to further investigate. Here is the...