Recent content by 4thGen4.7

I appreciate the suggestions guys, I brought it up with the tech and it sounds like he did a good bit of due diligence to try and find the issue. Apparently after the module under the dash was plugged back in the computer did a self test that showed the problem is in the actuator inside the...

Such an unusual case I couldn't find anything in search. A few months ago a shop put in a a tcase from another v8, lightly used. They just did some work on the A/C and when they put the dash back together the 4LO beeps and flashes... they're blaming it on the tcase... I used 4LO after they...

Hey guys - I'm replacing the wiring harness for the throttle body position sensor from a Sequoia w 2UZ-FE. The wires are a different color than on my 04 4Runner. I was wondering if someone could tell me what order the colors are in on the 4Runner. Mine didn't have a plastic housing, the wires...

I wonder if air mix servo isn't turning the levers anymore.. I neglected to mention that I decided to purposely break the top screw on the bracket instead of dropping the blower and fan motor assembly

So the timeline and events look like this: https://www.toyota-4runner.org/attachments/4th-gen-t4rs/16696d1211751833-anyone-03-4r-ac-blows-hot-driver-side-cold-passenger-side-4runner-hvac-components-gif I replaced the 'Mode Damper Servo Sub-Assembly (Air Outlet Damper Control Servo Motor)' When...

Haha! Yours is taped down but you're able to get your air to mix and blow as desired? Shoot maybe that thing isn't my problem..

I should have specified - I was under there fixing my servo when I pulled down on the door and broke it. Servo works awesome now tho!!!

According to search, I'm the only person who has accidentally broken their blend door for the A/C.. the arm will tip it closed.. but it won't come back up. Heat from the floor vents and cold from the main vents.. Does this mean a trip to the scrap yard? I can't make out where the actual break is..

I want to preface this by saying, I only took it to the dealer because I was assured it could be looked at sooner than every other shop in town could guarantee. I knew I would be F'd but I could never imagine how badly. This has been an absolute nightmare. I am surprised I do not have a...

Update: I ripped it apart and replaced the FEL-PRO gasket I got from O'Reilly's (absolute POS) with a Beck Arnley that was much higher quality and looked closer to OEM. The FEL-PRO had a blow out and you could see where the manifold came off the edge a little bit. Needless to say, I was...

This is all great - thank you for your reply. Thanks for sharing the link to the big boy manual - I like the pictures in the Chilton though haha, this is much more informative though so I'll toes it. I'm actually thinking it is going to be the gasket.. I didn't actually check the orientation...

Considering I didn't actually look at orientation, just whether it fit over the holes and studs... this could be it. I'll take a look and report back.

I don't think so - problems came up prior to messing with any coils. Camshaft position sensor hasn't been touched but I can certainly double check that. Thank you for your reply

Hey everyone - My 04 4.7L v8 is having misfire on all cylinders, codes P300-P308. When I start it up, it will run for a few seconds until it dies. I was able to eventually start it up enough to where it would idle until I turned the key off. The idle is really, really rough though. No response...

Yep - been looking for a reason to take a look at those (hopefully) sexy valves :eyebrows: Edit: looks like you might be right around my area. We should connect via PM