Recent content by Aidio95

New brakes Just got around to installing the new wheel studs, stoptech rotors, ebc yellowstuff pads and the 13wl calipers.

Lug studs Got all of the passenger front lug studs pulled out and I'm gonna do the driver's tomorrow. We are replacing them because they were bent when we got the truck and we are doing the brakes anyways so figured we probably should.

I have lived in Canada my whole life but my family history is a mixture of English Irish and German.

1st vs 2nd gen Both of the superchargers are cross compatible. They are both for the 5vz-fe and the second generation supercharger just has an updated design.

Tried to send pm I think since I'm under the post minimum and I'm not a full member i can't send pms? But anyways i would be interested in getting a 12" black style a, an 8" black style a and a white 8" style a. If you could send me the payment info that would be great!

Oh of course. I hadn't thought about that. Sent from my iPhone using Tapatalk

I want that That is a sick taco! I would expect it to be more than 22k for the whole truck and mods.

3rd gen 5speed The pre 00s were the last 4runners to come in a manual and the 99s with the highlander springs had the best clearance of any stock 4runner. Also I have a 98 so of course 3rd gens are the best!

Started pulling the old front brakes off of the 4Runner so I can upgrade to the 13wl caliper stoptech slotted rotors and ebc yellowstuff pads.

Probably shouldn't be saying this as it gets busy enough out there already but it looks like McLean creek near a place I call Jobin's hole named after a friend who drowned his dirtbike there haha.

Clutch slave removed Redoing the whole hydraulic clutch system because there are a couple of small leaks and I think the slave was shot anyways. I removed the master cylinder and rebuilt it and I have a new slave cylinder so all I need to do is get the old lines out then rebuild it.

Stupid bolt! I stripped the front diff drain plug bolt today on the 4Runner trying to change the fluid (I just got the truck and have no idea when it was last changed. Based on the rear fluid I'm guessing not recently.) Any suggestions on how to get it out are welcome!

Replace I've read that fuel leaks at the injectors are quite common on the 3rd gens and I would definitely say it's worth it to replace them.