Recent content by Alex 400

definatly. Also there might be a fuel delivery problem that has put the computer in limp mode, which kills the gas milage.

Is this the V-6? On my 94, which shouldn't matter, in the fuse box under the hood there is a 15amp fuse marked EFI. pull that for 30 seconds and see if that resets the code.

Its not that the oil is going to spraying out like it has alot of pressure, but when its that thick it makes it a little harder to push the oil through the oil passages. I run 15w-40 Delo 400 and my oil pressure is perfect. Right where it should be. 20w-50 would be fine too, in the spring...

I got a 2001 Honda XR400 you can see it in my garage on TT, I have the same screen name here that i do there, Alex 400. Great bike

25w-60 will send the oil pressure through the roof! If anything use 20w-50 thats as thick as i would go with an OHC.

I am on the thumpertalk 4 stroke motorcycle forum and we are always pointing people in different directions or to other websites because they might have seen something helpful to them so they turned it around to help the other guys who are having the same problem. On thumpertalk we have a...

I ran into this "low oil pressure" and was questioning it until i read the manual. If you are at idle it can be anywhere from the bottom to the middle of the gauge (depending on how hot it is) And regular oil pressure while running is from the first line up. I run delo 400 15w-40 in mine and it...

Yeah my 94 has a problem with oil seeping from the walve cover gaskets, but it looks like its coming from the sump too, but its not. In reguards to the sludge, the 3.0L V-6 had the dendency to sudlge up in the cylinder heads and caused oil comsumption issues, so you would want to have it flush...

Or maybe a skinney 33"? I don't off road really but i understand the principle of the upgrading process and some rules of thumb. Lift with tires, get articulation from different springs. Maybe like the 3" your talking about with sway bar disconnects. Then your not really high, but have some...

Thanks.

I am new hear, so please bear with me a little bit I want to do the OME 2" lift to 1994 and was wondering if for only two inches of lift would I need to use a Pan Hard drop bracket? I know on 3" and up it becomes a problem but this is only two inches and it doesn't come in the kit. so, just...