Recent content by alex56

Where is the easiest switched ground to tap into ?

So no relay ? Lol

Got tired and gave up on it in gunna try again this weekend, so in theory i don't even need the relay ?

Here's where I'm at as of now 85 and 30 are grounded in engine bay 87a is going only to orange wire on scanner 86 is going to the add a circut in interior fusebox Scanner black wire is grounded Scanner red wire has constant power from another line I tapped into So as of now, the light...

I'm using this relay below, I currently have the orange hooked into the red that may be the problem

Thank you for all the continuous help turbo I really appreciate it! I am going to give it a try tonight ! EDIT: Working on it now, I have hooked it up exactly as you said last but it's not working, what should i do with the red wire from the scanner ? I grounded black from scanner. In the...

It's a Varad VS350B, Has a red power wire, black ground, and a orange wire. I've had it hooked up before on a switch I just want to eliminate the switch lol

Sorry I did not see your post! I'm going to give that a try once I get home and see if it works. I'm ising a Varad LED scanner. Thanks for the input!

I really don't want to have to use a switch, I just want it to come off when the cars off and off when the cars on lol The pic is what I went off of, I could hear the switch opening and closing when Tapping into my add a circut but the light wouldn't come on, but it had power since it lit up...

I'm stumped. Electrical is not my strong suit. I'm trying to wire a relay to power a flashing LED when the car is off, and that will go off when the car is turned on. I have the add a circut to tap into the fuse box for ignition power, and I have a 5 pin relay. All I can pretty much...

I'm also OG owner of mine, currently have 184,xxx over 100,000 of those are on 35's :dancin: I've always ran royal purple ATF in the trans for a good amount of time. I couldn't imagine its because of the fluid but who knows. my trans runs around 200-210 degrees according to my gauge all the...

Wow 3 years ago I switched all my dash lights to LED long ago and have not had a problem since. Try replacing the one bulb under the shifter to an LED and it should be fine

Upon further testing I was able to come to the conclusion that it is in fact the transmission (I believe). Mainly for the fact that I cannot replicate the noise when not in gear. I drove today until I heard the noise and shifted into neutral holding it steady, the noise went away I immediately...

Since a few weeks ago my 0'3 V6 has developed a strange whine/harmonic noise while only in gear under load; seems to be coming from engine. I cannot get it to replicate in neutral or park revving the engine. The noise is most prominent around 1,500-2,000 RPM at any speed under load. Pretty much...

Yes you can buy the kit from Energy Suspension for the two lower arms and the two uppers about 80 bucks I believe. Honestly if you have the funds, buy new sets of arms, they are much stronger than the stock ones.