Recent content by awesomesauce0528

Selling my 4runner with 187k miles on it. I am the third owner and did regular oil changes and tire rotations. I have done some mods to it which are listed below. Looking to get around 14k OBO. Text me at (501)-766-5757 with any questions and feel free to check out my build thread to see more...

Sorry for such the late reply. I've been pretty busy here lately and haven't been on here in a while, but the wheel speed sensors I bought are working and have been for the past 2.5 years

I made a switch panel from the sunglass holder. I didn't use the switch pros but I'm sure it would work with the switch pros if someone decided to do something similar to mine.

If you wanted, you could try adding another spacer or two. I’ve seen some guys have to use 3 spacers to get no CEL and some guys get away with 1. Weird but it works and is significantly cheaper than the urd O2 simulator.

Only diy simulator I’ve seen was here http://http://www.toyota-4runner.org/3rd-gen-t4rs/175242-how-make-your-own-rear-o2-simulator-%245-7.html Also, it’s not diy, but URD makes an O2 simulator for $150. Not sure what your situation is but if you’re throwing a CEL code for a bad cat some guys...

Here's a few of mine for now

Finally finished up the relay box. To get the mount to work with my relay box I had to make a few modifications. I made a large cutout for the relay box to sit in and had to cutout the mounting holes so that it could bolt to the inner fender. I used some 1/8 inch aluminum to hold up the other...

Got the overhead hooked up and installed. Also got the pelfreybilt fuse panel in this past week. Its for a tacoma/5th gen 4runner so I had to make a few modifications to get it to work but my relay box is mounted now and I just have to run some wires and it'll be done. I don't have any pics of...

Finally got around to painting the overhead switch panel. I think it looks pretty good and matches the interior parts pretty well. I used a SEM Primer 42003 then used a SEM Base coat 17103 and a krylon satin clear coat. I also ordered a pelfreybilt fuse panel to mount my bussmann fusebox.

I mainly go to the Ouachita forest to camp because that's what is closest to me, but a few times a year I go to the Ozarks and do some camping as well. I have a few guys I go with and I'd be happy to let you know next time we plan a trip if you want to come.

Got the new shocks and extended sway bar links on last weekend. Straight forward job but the bolt on the sway bar links was seized so I ended up having to cut them off. Got a picture of the new shocks installed. Not much too it, only concern is that the wheel may hit the reservoir with some...

Ebay for the shocks. The ones I got were new but were an open box item that got a discount. I got the grill mesh from https://www.customcargrills.com/index.asp. I also bought the mesh from their scrap mesh pile. It supposedly had a bad powdercoat, but as far as I could tell it looked fine, so...

Haven't done much lately but I have ordered some stuff for the 4runner. Found a great deal on some fox 2.5 shocks for the rear. Those came in so I decided that while I have everything apart in the rear I could replace the stock rear sway bar links with some extended ones, so I ordered some 2nd...

Sorry I'm just now seeing this, I've been busy. I just bought some extended rear sway bar links and plan to install them next weekend. I don't have bumpstop extensions but I do probably need some so I will buy them eventually. The bilstein shocks that I currently have on the rear are fine and...

Might be the sway bar mounts. I had a similar noise that would occurring going over things like speed bumps and it turned out to be a loose sway bar mount